• Journal of Korean Society of Forest Science
• /
• v.78 no.3
• /
• pp.255-262
• /
• 1989

Vegetation data of the mixed mesophytic forest in Mt. Chombong area were analyzed by the methods of classification and ordination. 'Weighted group average linkage cluster analysis' recognized five distinctive vegetation groups, based on the abundance data of 83 woody plant species in 70 sampling units. The species diversity was also examined for each group. The importance values of 42 tree species in the groups were subjected to principal component analysis (PCA). The PCA ordinated five vegetation groups on the first two axes, so as to compare similarity among them in terms of species composition. Acer palmatum, Fraxinus rhynchophylla, Quercus mongolica, and Acer mono had greatest influence on the determination of group scores with high eigenvectors (component loadings) in the first axis. Distribution of these four dominant species appeared to be important in determining community association in this diversified forest.

• The KIPS Transactions:PartB
• /
• v.16B no.1
• /
• pp.71-78
• /
• 2009

For more effective index extraction and index weight determination, studies of extracting indices are carried out by using document content as well as structure. However, most of studies are concentrating in calculating the importance of context rather than that of XML tag. These conventional studies determine its importance from the aspect of common sense rather than verifying that through an objective experiment. This paper, for the automatic indexing by using the tag information of XML document that has taken its place as the standard for web document management, classifies major tags of constructing a paper according to its importance and calculates the term weight extracted from the tag of low weight. By using the weight obtained, this paper proposes a method of calculating the final weight while updating the term weight extracted from the tag of high weight. In order to determine more objective weight, this paper tests the tag that user considers as important and reflects it in calculating the weight by classifying its importance according to the result. Then by comparing with the search performance while using the index weight calculated by applying a method of determining existing tag importance, it verifies effectiveness of the index weight calculated by applying the method proposed in this paper.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.26 no.2
• /
• pp.106-124
• /
• 1984

Monthly streanflow of watersheds is one of the most important elements for the planning, design, and management of water resources development projects, e.g., determination of storage requirement of reservoirs and control of release-water in lowflow rivers. Modeling of longterm runoff is theoretically based on water-balance analysis for a certain time interval. The effect of the casual factors of rainfall, evaporation, and soil-moisture storage on streamflow might be explained by multiple regression analysis. Using the basic concepts of water-balance and regression analysis, it was possible to develop a generalized model called the Regionalized Regression Model for Monthly Streamflow in Korean Watersheds. Based on model verification, it is felt that the model can be reliably applied to any proposed station in Korean watersheds to estimate monthly streamflow for the planning, design, and management of water resources development projects, especially those involving irrigation. Modeling processes and properties are summarized as follows; 1. From a simplified equation of water-balance on a watershed a regression model for monthly streamflow using the variables of rainfall, pan evaporation, and previous-month streamflow was formulated. 2. The hydrologic response of a watershed was represented lumpedly, qualitatively, and deductively using the regression coefficients of the water-balance regression model. 3. Regionalization was carried out to classify 33 watersheds on the basis of similarity through cluster analysis and resulted in 4 regional groups. 4. Prediction equations for the regional coefficients were derived from the stepwise regression analysis of watershed characteristics. It was also possible to explain geographic influences on streamflow through those prediction equations. 5. A model requiring the simple input of the data for rainfall, pan evaporation, and geographic factors was developed to estimate monthly streamflow at ungaged stations. The results of evaluating the performance of the model generally satisfactory.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.3
• /
• pp.425-433
• /
• 2018

In this paper, we propose a super-resolution reconstruction algorithm for plenoptic images based on the reliability of disparity. The subperture image generated by the Flanoptic camera image is used for disparity estimation and reconstruction of super-resolution image based on TV_L1 algorithm. In particular, the proposed image reconstruction method is effective in the boundary region where disparity may be relatively inaccurate. The determination of reliability of disparity vector is based on the upper, lower, left and right positional relationship of the sub-aperture image. In our method, the unreliable vectors are excluded in reconstruction. The performance of the proposed method was evaluated by comparing to a bicubic interpolation method, a conventional disparity based method and dictionary based method. The experimental results show that the proposed method provides the best performance in terms of PSNR(Peak Signal to noise ratio), SSIM(Structural Similarity).

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.26 no.2
• /
• pp.99-112
• /
• 2013

This paper presents a subspace system identification for estimating the stiffness matrix and flexural rigidities of a shear building. System matrices are estimated by LQ decomposition and singular value decomposition from an input-output Hankel matrix. The estimated system matrices are converted into a real coordinate through similarity transformation, and the stiffness matrix is estimated from the system matrices. The accuracy and the stability of an estimated stiffness matrix depend on the size of the associated Hankel matrix. The estimation error curve of the stiffness matrix is obtained with respect to the size of a Hankel matrix using a prior finite element model of a shear building. The sizes of the Hankel matrix, which are consistent with a target accuracy level, are chosen through this curve. Among these candidate sizes of the Hankel matrix, more proper one can be determined considering the computational cost of subspace identification. The stiffness matrix and flexural rigidities are estimated using the Hankel matrix with the candidate sizes. The validity of the proposed method is demonstrated through the numerical example of a five-story shear building model with and without damage.

• Korean Journal of Remote Sensing
• /
• v.32 no.3
• /
• pp.201-220
• /
• 2016

In this study, the net solar radiation fluxes at the surface are retrieved by updating an existing algorithm to be applicable for MODerate resolution Imaging Spectroradiometer (MODIS) observations, in which linear relationships between the solar radiation reflected from the top of atmosphere and the net surface solar radiation are employed. The results of this study have been evaluated through intercomparison with existing Clouds and the Earth's Radiant Energy System (CERES) data products and ground-based data from pyranometers at Gangneung-Wonju National University (GWNU) and the Southern Great Plains (SGP) of observatory of Atmospheric Radiation Measurement (ARM) site. Prior to the comparison of the surface radiation energy in relation to the energy balance of the earth, the radiation energy of the upper part of the atmosphere was compared. As a result, the coefficient of determination was over 0.9, showing considerable similarity, but the Root-Mean-Square-Deviation (RMSD) value was somewhat different, and the downward and net solar-radiation energy also showed similar results. The surface solar radiation data measured from pyranometers at Gangneung-Wonju National University (GWNU) and Atmospheric Radiation Measurement (ARM) observatory are used to validate the solar radiation data produced in this study. When compared to the GWNU, The results of this study show smaller RMSD values than CERES data, showing slightly better agreements with the surface data. On the other hand, when compared with the data from ARM SGP observatory, the results of this study bear slightly larger RMSD values than those for CERES. The downward and net solar radiation estimated by the algorithm of this study at a high spatial resolution are expected to be very useful in the near future after refinements on the identified problems, especially for those area without ground measurements of solar radiation.

• Korean Journal of Microbiology
• /
• v.40 no.2
• /
• pp.104-110
• /
• 2004

To determine evolution and genotype of new chromosomal AmpC $\beta$-lactamases among clinical isolates of Enterobacter species, we performed antibiotic susceptibility testing, pI determination, sequencing, and phy-logenetic analysis using developed expression/secretion vector. Six isolates have shown to produce AmpC $\beta$-lactamases. Six genes of AmpC $\beta$-lactamases that are responsible for the resistance to cephamycins (cefoxitin and cefotetan), amoxicillin, cephalothin, and amoxicillin-clavulanic acid were cloned and characterized in pMSG12119. Insert fragment containing the ampC genes was sequenced and found to have an open reading frame coding for 381-amino-acid $\beta$-lactamase. The nucleotide sequence of four ampC genes ($bla_EcloK992004.l$, $bla_EcloK995120.1$, $bla_EcloK99230$, and $bla_EareK9911729$) shared considerable homology with that of chromosomal ampC gene ($bla_EcloMHN1$) of E. cloacae MHN1 (more than 99.6% identity). The sequences of two ampC genes ($bla_EcloK9973$ and $bla_EcloK9914325$) showed close similarity to the chromosomal ampC gene ($bla_EcloQ908R$) of E. clo-acae 908R (99.7% identity). The results from phylogenetic analysis suggested that six ampC genes could be originated from $bla_EcloMHN1$ / or $bla_EcloQ908R$ / MIC patterns and exact pI values of six transformants indicated that the developed expression/secretion vector (pMSG1219) was suitable for the characterization of foreign genes in E. coli strain.

• Korean Journal of Food Science and Technology
• /
• v.34 no.1
• /
• pp.96-102
• /
• 2002

The levels of biologically active compounds, such as isoflavone, total saponin, dietary fiber, soy oligosaccharides, and lecithin from each serving size of commercial soy products, were quantitatively determined from the raw soybean, soymilk, tofu, isolated soy protein (ISP), soybean paste(toenjang), natto, and tempeh from local and foreign market. Soy flour, natto, and soymilk contained 489.1 mg, 308.3 mg, and 138.1 mg of isoflavone in each 100 g of dry matter, respectively. The ratios of aglycone to glucoside of soybean paste and tempeh showed relatively high level compared with other tested soy products. Commercial soymilk showed the highest ratio of soluble fiber to total dietary(59%). The higher levels of dietary fiber (20.1 g) and lecithin (1.13 g) were also found in tofu. The lecithin and saponin content of isolated soy protein(ISP) were highest (0.63 g and 0.65 g/ 100 g of dry matter) among the tested samples. In conclusion, soy flour showed the highest level of biologically active compounds, such as saponin, isoflavone, dietary fiber, and soy oligosaccharides. But when the evaluation was based on the serving size, soymilk containing 31.5 mg of isoflavone, 2.59 g of dietary fiber, 0.57 g of oligosaccharides, 0.10 g of lecithin, and 0.11 g of saponin showed similarity to those of the tested soybeans(20 g).

• Tunnel and Underground Space
• /
• v.27 no.1
• /
• pp.50-57
• /
• 2017

In this study, the experiment for determining shock loss at the branch is conducted for the design of network double-deck road tunnel ventilation. The shock loss coefficient that determines the quantity of shock loss has been considered only regarding the constant aspect ratio of circular or rectangular section. However the suggestion of shock loss coefficient is needed since the aspect ratio of double-deck road tunnel for small vehicle is considered around 1:3 with the low height in Korea. The experiment model was made with the scale of around 1:23 applying Reynolds similarity law, so that the shock loss coefficient on the branch of the large aspect ratio was measured. The result of the study showed that shock loss coefficients of both split branch and straight branch were measured two to three times higher than those calculated from the theoretical equation or design values of previous studies. Therefore the study resulted the effect of large aspect ratio on shock loss coefficient was huge, and it is expected that precise design value can be suggested for the design of network double-deck tunnel ventilation.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.16 no.2
• /
• pp.99-105
• /
• 2012

Purpose : This study is designed to compare two parameters reflecting $^{18}F$-FDG uptake, SUV and radioactivity, for diagnosis of thyroid cancer in dual time $^{18}F$-FDG PET/CT imaging and to find which parameter is more useful to decide whether the tumor is malignant or not. Materials and Methods : We performed retrospective study for 40 patients. All patients are diagnosed as primary thyroid cancer and examined $^{18}F$-FDG PET/CT. First, we got the dispersion of scattering beam of neck and lung apex to set a background and compared each dispersion, mean value, standard deviation of maxSUV and radioactivity. Also, mean maxSUV, ${\Delta}maxSUV$, ${\Delta}maxBq$/ml(%) and radioactivity between groups according to lesion's size based on biopsy are compared with independent-sample t-test. Results : the values that were from maxSUV and radioactivity measurement technique were compensated and calculated to practical values for mean comparison and patients were divided to two groups based on tumor size, Group1 ($size{\leq}1$ cm, n=21), Group2 (size>1 cm, n=19) for accurate comparison. In Group1, maxSUV (semi-quantitative analysis) was increased from $5.64{\pm}5.85$ (1.89~17.84) at first image to $5.90{\pm}5.01$ (1.95~18.22) at second image and radioactivity (Bq/ml) (quantitative analysis) showed similar increase from $5.93{\pm}6.38$ (2.50~16.75) at first image to $6.01{\pm}5.25$ (2.66~16.58) at second image. In Group2, TFmaxSUV was $10.54{\pm}14.36$ (2.54~33.89) in true first image, TSmaxSUV was $9.85{\pm}12.88$ (2.62~26.20) in true second image separately. The maxSUV showed a significant difference in the mean comparison between the two groups (p=0.035) But, mean radioactivity (Bq/ml) was $5.93{\pm}6.38$ (4.81~40.99) in true first image, $6.01{\pm}5.25$ (4.51~36.93) in true second image and didn't show a significant difference statistically (p=0.126) Conclusion : In diagnosis of thyroid tumor, SUV and radioactivity depending on $^{18}F$-FDG uptake showed high similarity with coefficient of determination (R2=0.939) and malignant evaluation results using dual time also showed similar aspect. Radioactivity for evaluation of malignant tumor didn't show better specificity or sensitivity than maxSUV.