• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.25 no.2
• /
• pp.293-302
• /
• 2015

With the attack information collected during SMS phishing investigation, this paper will propose SMS phishing profiling model applying criminal profiling. Law enforcement agencies have used signature analysis by apk file hash and analysis of C&C IP address inserted in the malware. However, recently law enforcement agencies are facing the challenges such as signature diversification or code obfuscation. In order to overcome these problems, this paper examined 169 criminal cases and found out that 89% of serial number in cert.rsa and 80% of permission file was reused in different cases. Therefore, the proposed SMS phishing profiling model is mainly based on signature serial number and permission file hash. In addition, this model complements the conventional file hash clustering method and uses code similarity verification to ensure reliability.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.1115-1122
• /
• 2011

Reinforced-Roadbed materials are usually composed of crushed stones. Repeated load application can induce deformation in the reinforced-roadbed layer so that it causes irregularity of track. Thus it is important to develop a prediction model of elastic modulus based on stress-strain relation under repeatitive load in order to investigate behavior of reinforced roadbed. The prediction model of elastic modulus of the material can be obtained from repeated triaxial test. However, a proper size of the sample for the test must be used. In this study, a large repeatitive triaxial test apparatus with the sample size of diameter of 30 cm and height of 60cm was adapted for performing test of the crushed stone reinforced-roadbed considering large particle size to get resilient modulus Mr. The obtained resilient modulus was compared to shear modulus obtained from mid size resonant column test. The sample size effect is somewhat large enough so that it is required to design a scale factor based on similarity law in order to use smaller samples for getting elastic modulus of the crushed stone reinforced-roadbed material. A scale factor could be obtained from this study.

• Fashion & Textile Research Journal
• /
• v.20 no.3
• /
• pp.293-303
• /
• 2018

Since 2009, consumers could access a new shopping channel called 'mobile shopping' with the generalization of smartphones. Mobile shopping (based on wireless communication technology), emphasizes convenience differentiated from internet shopping. A recent report introduced fashion products as powerful global drivers for mobile shopping sales. Korea and China have the highest percentage of consumer mobile shopping experiences compared to other countries. This study investigates the effects of cross-over shopping orientation, perception of app attributes, and flow on app loyalty that compared Korean and Chinese consumers. We obtained 652 usable questionnaires from two local college students; subsequently, data were analyzed by using factor analysis, Cronbach's alpha, and regression analysis using SPSS 21.0 Package. The study results showed that the cross-over shopping orientation affected perception of app attributes that included Review/Information, Design, Response and Product. Product only affected Flow, which reflected a high similarity between Korean and Chinese consumers. However, Korean and Chinese consumers showed remarkable differences in the factors related to app loyalty. Therefore, the results indicate that retailers of fashion products have developed strategies to improve mobile sales and increase the app loyalty of cross-over shopping orientation consumers.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.1
• /
• pp.113-124
• /
• 1997

This work is performed to investigate the pressure drop and heat transfer characteristics in the air side of finned-tube heat exchanger for air conditioner. Experimental apparatus and method are described to simulate the heat exchanger performance by using the three times enlarged model. The pressure drop and heat transfer coefficient were measured and compared for the heat exchangers with a plane fin and a commercial strip fin. The measured data for the strip fin agree well with those of prototype within a few percentages. For the plane fin, the measured data had similar trend to Gray & Webb's correlation at high air velocity, however a new correlation is needed to give more accurate prediction at low air velocity. It is found that most heat was transferred around the front row of the two-row heat exchanger, and the ratio of thermal load at the front tube row was increased for decreasing air velocity.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.178-188
• /
• 2007

In this paper, a half-scaled substructure test was performed to evaluate the buckling and structural safety of an existing transmission tower subjected to wind load. A loading scheme was devised to reproduce the dead and wind loads of a prototype transmission tower, which uses a triangular jig that is mounted on the reduced model to which the similarity law of a half length was applied. As a result of the preliminary numerical analysis carried out to evaluate the stability of a specimen for the design load, it was confirmed that the calculated axial forces of tower leg members were distributed to $80{\sim}90%$ of an admissible buckling load. When the substructured transmission tower was loaded by 270% of its maximum admissible buckling load, it was failed due to the local buckling that is occurred in joints with weak constraints for out-of-plane behavior of leg members. By inspection of load-displacement curves, displacements and strains of members, it is considered that this local buckling was due to additional eccentric force by unbalanced deformation because the time that is reached to yielding stress due to the bending moment is different at each point of a same section.

• Journal of The Korean Astronomical Society
• /
• v.26 no.2
• /
• pp.89-98
• /
• 1993

Magnetostatic models of starspots of late type main sequence stars$(G5V\~K5V)$ have been constructed to investigate their physical characteristics by using the similarity law suggested by Schluter and Temesvary(1958) and later employed by Deinzer(1965) and Yun(1968). The starspots are assumed to be single, circular and in horizontal magnetostatic equilibrium. In the present study we considered only those model spots whose area covers less than $12\%$ of the entire stellar surface as suggested by observations. The computed surface field strength of our model spots ranges from $10^3$\;to\;several\;10^3$ gauss and their magnetic flux is found to be $10\~100$ times that of sunspots. The field strength is sensitive to spectral type, which increases with later spectral type. In contrast to the field strength, the area of starspots depends strongly on the total magnetic flux. Finally, it is noted that the computed field strength of model spots belonging to $G0V\~G5V$ falls below the equipartition field strength at their parent stellar surface unless the coverage is less than $2\%$. This suggests that the observed spot on $G0V\~G5V$ stars is likely to be a group of small starspots.

• Fibers and Polymers
• /
• v.4 no.4
• /
• pp.188-194
• /
• 2003

Phase behavior and spinodal phase separation kinetics in binary blends of a random copolymer of vinylidene fluoride and trifluoroethylene (75/25) [P(VDF/TrFE)] and poly(l,4-butylene adipate) (PBA) have been investigated by means of optical microscopic observation and time-resolved light scattering. The blends exhibited a typical lower critical solution temperature (LCST)∼${34}^{\circ}C$ above the melting temperature of the P(VDF/TrFE) crystals over the entire blend composition range. P(VDF/TrFE) and PBA were totally miscible in the temperature gap between the melting point of P(VDF/TrFE) and the LCST. Temperature jump experiments of the 3/7 P(VDF/TrFE)/PBA blend were carried out on a light-scattering apparatus from a single-phase melt state (${180}^{\circ}C$) to a two-phase region (205∼${215}^{\circ}C$). Since the late stage of spinodal decomposition (SD) is prevalent in the 3/7 blend, SD was analyzed using a power law scheme. Self-similarity was preserved well in the late stage of SD in the 3/7 blend.

• International Journal of Automotive Technology
• /
• v.2 no.1
• /
• pp.17-23
• /
• 2001

Measurements of the initial values lead to an inverse and mathematically unprecisely formulated problem. A precise definition of an inverse problem is possible. It is to state a mathematical model of a physical process with clearly defined initial and exit values for the system behind the process. One can grasp the idea of an inverse problem by considering the tire as a copy of the objects of nature in a room with observations. Interpretation of nature is generally a result of an inverse problem. On one hand, the tire may be represented through the sensory organs and the nervous system as well as the experiences of the developer's existing apparatus of the projection of reality. On the other hand, it may be represented by a physical law or a model that can be confirmed or is to be refuted with the help of suitable measurements. During reconstruction of a measuring signal and the identification of a black box that can be assumed to be linear and causal, the tire becomes a first type Volterra integral equation of the convolution type. But measurements of the initial values are always fuzzy, the errors grow and the system behavior can no longer be forecasted. Thus, we have to deal with a chaotic system. This chaos produces fractals in a natural way. These are self-similar geometric structures. This self-similarity is clearly visible in the design.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.03a
• /
• pp.640-648
• /
• 2009

Recently the truction of coastal reclaimation work has been extensively implemented in Korea. The Sondo New City is being established on the reclaimed land from the sea, construction companies of metro construction are planing to pull-out the sheet pile for saving the construction cost. In the case of soft marine clay, it is very difficult to pull-out the sheet pile by using the hydraulic hammer difficult. Therefore, the man of the field must be aware of vibration effect to the ground and the structure. For understanding the vibration effect to the ground during subway construction, the model was formulated with 1/25 braced-cut for subway construction. Scott and Iai(1989) proposed the law of the similarity for other experimental conditions. The laboratory model test was conducted under the vibration condition of sheet pile pulling out. The settlement on the ground surface was measured during the shaking table test. The pore water pressure was also monitored in the upper, middle, and lower layers of soil. The field settlement level and the pore water pressure can be predicted by using the results of the laboratory shaking table test.

• Advances in materials Research
• /
• v.8 no.3
• /
• pp.155-177
• /
• 2019

In this paper, a new displacement based high-order shear deformation theory is introduced for the static response of functionally graded sandwich plate with new definition of porosity distribution taking into account composition and the scheme of the sandwich plate. Unlike any other theory, the number of unknown functions involved is only four, as against five in case of other shear deformation theories. The theory presented is variationally consistent, has strong similarity with classical plate theory in many aspects, does not require shear correction factor, and gives rise to transverse shear stress variation such that the transverse shear stresses vary parabolically across the thickness satisfying shear stress free surface conditions. Material properties of FGM layers are assumed to vary continuously across the plate thickness according to either power-law or sigmoid function in terms of the volume fractions of the constituents. The face layers are considered to be FG across each face thickness while the core is made of a ceramic homogeneous layer. Governing equations are derived from the principle of virtual displacements. The closed-form solution of a simply supported rectangular plate subjected to sinusoidal loading has been obtained by using the Navier method. Numerical results are presented to show the effect of the material distribution, the sandwich plate geometry and the porosity on the deflections and stresses of FG sandwich plates. The validity of the present theory is investigated by comparing some of the present results with other published results.