• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.29 no.8 s.239
• /
• pp.948-955
• /
• 2005

A three-dimensional computation was conducted to understand effects of the inlet boundary layer thickness on the internal flow in a low-speed axial compressor operating at the design condition($\phi=85\%$) and near stall condition($\phi=65\%$). At the design condition, the flows in the axial compressor show, independent of the inlet boundary layer thickness, similar characteristics such as the pressure distribution, size of the hub comer-stall, tip leakage flow trajectory, limiting streamlines on the blade suction surface, etc. However, as the load is increased, the hub corner-stall grows to make a large separation region at the junction of the hub and suction surface for the inlet condition with thick boundary layers at the hub and casing. Moreover, the tip leakage flow is more vortical than that observed in case of the thin inlet boundary layer and has the critical point where the trajectory of the tip leakage flow is abruptly turned into the downstream. For the inlet condition with thin boundary layers, the hub corner-stall is diminished so it is indistinguishable from the wake. The tip leakage flow leans to the leading edge more than at the design condition but has no critical point. In addition to these, the severe reverse flow, induced by both boundary layer on the blade surface and the tip leakage flow, can be found to act as the blockage of flows near the casing, resulting in heavy loss.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.5
• /
• pp.427-435
• /
• 2018

Many countries are trying to deploy satellite surveillance systems for their national defense, and one of these system uses optical systems to observe the satellites above their territories. The optical satellite surveillance system requires the coordinates of the satellites in an acquired image and expects that those coordinates to be delivered to the tracking system. The proposed method detects the satellite sources in a high-resolution image with fast image processing for the optical surveillance system. To achieve faster detection, the proposed method reduces the size of the original image and approximates the trajectory of a satellite, so image processing methods are only applied to the nearby area of the approximated trajectory in the original image. The proposed method shows the similar detection performance faster than the previous method.

• Journal of IKEEE
• /
• v.26 no.2
• /
• pp.150-159
• /
• 2022

In this paper, we propose a physics simulation for augmented reality (AR) billiards content. The characteristics of the physics simulation for the proposed AR billiards content are as follows. First, physical equations are derived by calculating the force and moment of inertia applied to the billiards ball to realize the motion of the billiards ball similar to the real one in the AR environment. Then, we determine the velocity and angular velocity of the virtual billiards ball associated with the rotation of the virtual billiards ball with respect to the impact point. Second, using some vectors such as incidnet vector, normal vector, reflection vector, the trajectory of the virtual billiards ball would be implement. these equations are applied to AR environment so that AR billiards content could be implement. This physics simulation allows users to feel like the real world using a virtual pool table and induce them to interact with the real environment. As a result of the experiment, the accuracy range between the path of the real billiards ball and the path of the virtual billiards ball was calculated to be 97.75% to 99.11%. Therefore, it was determined that the performance of the physics simulation for the AR billiards content proposed in this paper performs similarly to the path of the real billiards ball.

• Analytical Science and Technology
• /
• v.35 no.1
• /
• pp.32-40
• /
• 2022

The concentrations of radon in the atmosphere were measured at the Gosan site of Jeju Island during 2017-2018, in order to investigate the time-series variation characteristics and the dependency of airflow transport pathways. The mean ²²²Rn concentration was 2,480 mBq m^-3, and its monthly concentration in November was 3,262 mBq m^-3, more than twice as that in July (1,459 mBq m^-3). The diurnal radon concentrations increased throughout the nighttime to the maximum (2,862 mBq m^-3) at around 7 a.m., then gradually decreased throughout the daytime by the minimum (1,997 mBq m^-3) at around 3 p.m. The seasonal and monthly variations of CO, NO₂, O₃ showed a roughly similar pattern to that of radon for the same period, as high in winter and low in summer. The cluster back trajectory analysis described that about 60 % of overall airflow pathways was influenced by the airflow from China. The concentrations of radon and gaseous pollutants were relatively high as the airflow was influenced by China continent, but comparatively much lower as influenced by the northern Pacific Ocean.

• Journal of Environmental Science International
• /
• v.31 no.6
• /
• pp.503-513
• /
• 2022

This research investigated the effect of the eruption of Japan Sakurajima volcano on the concentration of ultrafine particle when the north Pacific high pressure exists in the Busan in summer. As a result of analyzing the forward trajectory using the HYSPLIT model, the air parcel from Sakurajima volcano passed through the sea in front of Busan at 1500 LST on July 17, 24 hours after the volcanic eruption. As a result of analyzing the PM₁₀ and PM_2.5 concentrations in the Busan for two days from July 16 to 17, 2018, the Sakurajima eruption in Japan, it can be seen that there was a high increase in PM₁₀ and PM_2.5 concentrations compared to the previous day. As a result of analyzing the backward trajectory, the air mass that reached Busan at 1300 LST on July 17, 2018 has moved near the Sakurajima volcano at 1,500 m, 2,000 m, and 3,000 m. The concentration of SO₄^2- in PM_2.5, the concentration of all three stations in Busan showed a sharp increase from 1000 LST on July 17th. Looking at the NH₄⁺ concentration in PM_2.5, it shows a very similar variation trend to SO₄^2-, and the correlation coefficient between the two components is 0.96 for Jangrimdong and Yeonsandong, and 0.85 for Busan New Port. Looking at the NO₃^- concentration in PM_2.5, the same high concentrations as SO₄² and NH₄⁺ were not observed in the afternoon of July 17th.

• Journal of Contemporary Eastern Asia
• /
• v.19 no.1
• /
• pp.43-58
• /
• 2020

This study examines media used for information in the East Asian countries of China, Japan, South Korea, Taiwan, and Singapore, using data from the World Values Survey. The sharing of Confucian culture may lead to a uniform media structure across these nations. Another possibility is technological determinism, which would also lead to similarity across nations. However, it is possible that countries are at different stages of technology development and will eventually become more similar. An opposing notion is that differences in other values among nations predict digital media use. To examine the evidence considering these possibilities, we factor analyze each population's use of nine traditional and digital media to see how similar the structures are. What results is a three-dimensional solution for four out of five countries, except Singapore, which has a more simple two-dimensional structure. Analysts regard Singapore as the most digitally connected society, which raises the question as to whether it is higher on a technological development trajectory, to which other countries may transition. Perhaps a more simple media use structure is an adaptation to increasing information load. As well, as mobile devices have become a primary means of accessing the range of traditional and social media, it may have an expanded role in reducing media channel entropy. In terms of frequency of media use, Singapore is highest, while China is the lowest. Singapore stands out in high mobile use, and China for low Internet use. There appear to be developmental differences across the nations. Regressions on Internet use for 18 values indices find different values predictors in the East Asian countries, ruling out Confucianism as producing similar media patterns.

• Journal of Korean Society for Atmospheric Environment
• /
• v.25 no.6
• /
• pp.550-561
• /
• 2009

This study is to investigate the air pollution characteristics of an industrialized midsize west-coastal city by comparing air quality to a neighboring inland city. The hourly averaged data of $O_3$, $SO_2$, $NO_2$, CO, and $PM_{10}$ measured from continuous air quality monitoring sites in Gunsan (coastal) and Jeonju (inland) were analyzed. The data set covers the period from 2004 to 2006. The annual average concentrations of the air pollutants in two cities were compared in their abundances and temporal trends as well. $O_3$ and $SO_2$ in Gunsan were relatively higher than those in Jeonju, while vice versa in case of $NO_2$ and $PM_{10}$. It seems that heavy automobile emissions from Jeonju mainly bring on higher $NO_2$ and $PM_{10}$ than those in Gunsan on annual base. $NO_2$ concentrations in both cities showed bimodal diurnal variations with peaks in the morning and in the late evening. These peaks correspond to the coupled effects of rush hour traffic and meteorological conditions (i.e., variation of mixing height and dispersion conditions). Maximum hourly averages of $NO_2$ ranged from 18 ppb to 28 ppb at Jeonju, and from 12 ppb to 20 ppb at Gunsan. $O_3$ showed typical diurnal variation with a maximum in the afternoon between 14:00 and 16:00 LST. Diurnal variations of CO and $PM_{10}$ were similar to $NO_2$ while $SO_2$ was similar to $O_3$. Seasonal variations of $PM_{10}$ in both cities indicated that their concentrations during spring season were significantly high. Asian dust storms occur frequently during spring and seem to affect increase in $PM_{10}$. High $O_3$ and $PM_{10}$ days were selected from both cities. The analyses based on the HYSPLIT trajectory model during the high $O_3$ and $PM_{10}$ showed these episodes (six cases) were mostly coincident with Asian dust storm originated from northern China and Mongolia. However, these high air pollution episodes in the west coastal cities may not only be caused by the Asian dust but also affected by other air pollutants transported from China accompanying the Asian dust.

• Journal of Korea Spatial Information System Society
• /
• v.8 no.2 s.17
• /
• pp.109-120
• /
• 2006

This paper addresses techniques for predicting a future path of an object moving on a road network. Most prior methods for future prediction mainly focus their attention on objects moving in Euclidean space. A variety of applications such as telematics, however, deal with objects that move only over road networks in most cases, thereby requiring an effective method of future prediction of moving objects on road networks. In this paper, we propose a novel method for predicting a future path of an object by analyzing past trajectories whose changing pattern is similar to that of a current trajectory of a query object. We devise a new function that measures a similarity between trajectories by reflecting the characteristics of road networks. By using this function, we predict a future path of a given moving object as follows: First, we search for candidate trajectories that contain subtrajectories similar to a given query trajectory by accessing past trajectories stored in moving object databases. Then, we predict a future path of a query object by analyzing the moving paths along with a current position to a destination of candidate trajectories thus retrieved. Also, we suggest a method that improves the accuracy of path prediction by regarding moving paths that have just small differences as the same group.

• Journal of Biomedical Engineering Research
• /
• v.31 no.6
• /
• pp.487-493
• /
• 2010

In this study, the circular friction massage technique was performed on the trapezius, the levator scapulae, and the deltoid muscles to collect the information on massage pressures and positions, and thus to utilize it in professional massage system design. Massage motion was measured with the 3-D motion capture system and finger pressures were simultaneously obtained with grip sensors. Massage motions, pressure patterns, and pressure times were different on each muscle, and the motion trajectory was similar to the ellipsoidal shape. The trapezius had higher pressure, longer massage time, and larger impulse than other muscles. These results could be useful to design a massage system based on biomechanical analysis. In order to improve massage effect, it is also strongly recommended that the tip of the system be similar with that of a human thumb in shape and material.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.2
• /
• pp.187-192
• /
• 2021

This study proposes a system for take-off in a forest or similar complex environment using an object detector. In the simulator, a raspberry pi is mounted on a quadcopter with a length of 550mm between motors on a diagonal line, and the experiment is conducted based on edge computing. As for the images to be used for learning, about 150 images of 640⁎480 size were obtained by selecting three points inside Kunsan University, and then converting them to black and white, and pre-processing the binarization by placing a boundary value of 127. After that, we trained the SSD_Inception model. In the simulation, as a result of the experiment of taking off the drone through the model trained with the verification image as an input, a trajectory similar to the takeoff was drawn using the label.