• Journal of Biomedical Engineering Research
• /
• v.35 no.3
• /
• pp.62-67
• /
• 2014

The purpose of the study was to identify the effect of laser parameters on photocoagulation to maximize safety and efficacy during varicose vein treatment. CW and pulsed modes at 1470 nm were initially compared as a function of power on bovine liver tissue. In the pulsed mode, various parameters including repetition rate, duty cycle, and irradiation time were compared to evaluate tissue response during thermal treatment. The results demonstrated that CW and pulsed modes yielded almost similar coagulation development possibly due to shorter irradiation time of 5 sec. Regardless of laser mode, both repetition rate and duty cycle presented constant coagulation rate whereas longer irradiation time facilitated coagulation process.

• Journal of the Korean earth science society
• /
• v.25 no.1
• /
• pp.39-47
• /
• 2004

In the FMAS system the effect of iron on alumina solubility in orthopyroxene has been determined by experiments with crystalline starting mixtures of garnet and orthopyroxene of known initial compositions at 20 kb, 975$^{\circ}C$ and 25 kb, 1,200$^{\circ}C$. These data have been modeled to develop a thermodynamic method for the calculation of Al$_{2}$O$_{3}$ in orthopyroxene as a function of P, T and composition. The direct application of the alumina solubility data in the MAS system to natural assemblages could lead to significant overestimation of pressure, probably by about 5kb for the relatively common garnet-lherzolites with abot 25 mol per cent Ca + Fe$^{2+}$ in garnet and about 1 wt. per cent Al$_{2}$O$_{3}$ in orthopyroxene since the effect of Fe is similar to that of Ca and Cr$^{3+}$in reducing the alumina solubility in orthopyroxene in equilibrum with garnet relative to that in the MAS system.

• Journal of Korean Institute of Industrial Engineers
• /
• v.29 no.1
• /
• pp.90-99
• /
• 2003

Object clustering, which makes classification for a set of objects into a number of groups such that objects included in a group have similar characteristic and objects in different groups have dissimilar characteristic each other, has been exploited in diverse area such as information retrieval, data mining, group technology, etc. In this study, an object-clustering problem with similarity coefficients between objects is considered. At first, an evaluation function for the optimization problem is defined. Then, a genetic algorithm and local optimization technique based on heuristic method are proposed and used in order to obtain near optimal solutions. Solutions from the genetic algorithm are improved by local optimization techniques based on object relocation and cluster merging. Throughout extensive experiments, the validity and effectiveness of the proposed algorithms are tested.

• Journal of Powder Materials
• /
• v.7 no.3
• /
• pp.154-160
• /
• 2000

In order to enhance sinterability of W-Cu composites used for heat sink materials, mechanical alloying process where both homogeneous mixing of component powders and fine dispersion of minor phase can be easily attained was employed. Nanostructured W-Cu powders prepared by mechanical alloying showed W grain size ranged of 20-50 nm and were able to be efficiently sintered owing to the fine particle size as well as uniform distribution of Cu phase. The thermal properties such as electrical resistivity, coefficient of thermal expansion and thermal conductivity were evaluated as functions of temperature and Cu content. It was found that the coefficient of thermal expansion could be controlled by changing Cu content. The measured electrical resistivities and thermal diffusivities were also varied with Cu content. The thermal conductivities calculated from the values of resistivities and diffusivities showed similar tendency as a function of temperatures. However, this is in contradiction with thermal conductivities of pure W and Cu which decrease with increasing temperature.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.11a
• /
• pp.455-461
• /
• 2000

A multichannel signal processing algorithm for generating real time virtual sound field was proposed. Evaluation of the system performance was done by an objective function that minimizes the difference between the real and generated signals at each control point. Since impulse responses at the surface of a rigid sphere show characteristics similar to those of real HRTF, a rigid sphere model was adequate to simulate the multichannel sound system. A two-channel system and two four-channel systems were studied with various combinations of source locations and speaker positions. The results show that a two-channel system has its best configuration when the angle spanned by the loudspeakers is less than $60^{\circ}$. In the case of four-channel systems, the overall performance was highly improved with one pair of speakers fixed at an optimal position. Left/right symmetry was a reasonable choice, but the additional front/back symmetry degraded the performance of system.

• Journal of Korea Water Resources Association
• /
• v.44 no.5
• /
• pp.407-416
• /
• 2011

This study expressed the reservoir's storage-discharge relation as a non-linear reservoir model and theoretically quantified the reservoir storage effect. Among those non-linear functions like exponential function, logarithmic function and power function considered, the exponential function of the storage-discharge relation was found to be the most valid. The non-linear reservoir model proposed was applied to the Chungju Dam and the Soyang River Dam, whose storage effects during flood were estimated to be about 23 hours and 43 hours, respectively. This result indicates that the Choongju Dam, even though its size and total storage volume are similar to those of the Soyang River Dam, does not achieve enough storage effect as its basin size and the inflow amount are much larger.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.24 no.1
• /
• pp.1-13
• /
• 2022

A weighted linear combination of seismic fragility models previously developed for cut-and-cover railway tunnels was presented and the appropriateness of the combined model was evaluated. The seismic fragility function is expressed in the form of a cumulative probability function of the lognormal distribution based on the peak ground acceleration. The model uncertainty can be reduced by combining models independently developed. Equal weight is applied to four models. The new seismic fragility function was developed for each damage level by determining the median and standard deviation, which are model metrics. Comparing fragility curves developed for other bored tunnels, cut-and-cover tunnels for high-speed railway system have a similar level of fragility. We postulated that this is due to the high seismic design standard for high-speed railway tunnel.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.5
• /
• pp.459-467
• /
• 2011

Rehabilitation exercises must maintain a patient's interest and permit a quantitative evaluation of the rehabilitation. We have developed a haptic-device system. When users move a grip, the haptic device provides a virtual force that either assists the movement of their arm or working against it. To investigate the functional effect of this system in a rehabilitation program, we used for five subjects with motor-function disorders and measured the grip position, velocity, force exerted on the grip, and EMG activities during a reaching task of one subject. The accuracy of the grip position, velocity and trajectories patterns were similar for all the subjects. The results suggested that the EMG activities were improved by applying the virtual force to the grip. These results can be used for the development of rehabilitation programs and evaluation methods.

• Journal of Oral Medicine and Pain
• /
• v.21 no.2
• /
• pp.383-392
• /
• 1996

An observation and evaluation of the reproducibility of the mandibular movements has been a integral part of a test for mandibular function and dysfunction. After Pantographic Reproducibility Index(PRI) was introduced in dentistry, many authors have used the index for investigation of mandibular movement function, especially in condylar compartment. Howerer, the difficult and time-consuming work of instrumentation for getting the PRI has been a major obstacle in using pantograph. This study was performed to try a new mandibular reproducibility index, so-called BioEGN reproducibility index(BERI), calculated from mandibular trajectory recorded with BioEGN. 26 dental students without any signs and symptoms of temporomandibular disorders and 22 patients with temporomandibular disorders took part in this study and classed to control group and patients group, respectively. Pantronic and BioEGN were used to record and calculate the indices, PRI and BERI. PRI had only one value, but BERI had two values of outgoing and incoming movement in each scale. With two scales of small and large, as a result, BERI had four values in this study. PRI corresponded to BERI in small scale on outgoing total movements. The data were calculated and analyzed with SAS/stat program and the conclusion of this study were as follows : 1. In every scales, in each movement, BERI on outgoing movement in control group was lower than that in patients group, respectively, but BERI on incoming movement was only different in one side movement, that was, left excursion. 2. The difference between BERI on outgoing movement and BERI on incoming movement was only shown in small scale on total movements, not in each movement, in control group. However, there was generally a positive correlationship between BERI on outgoing movement and BERI on incoming movement in each movement in both groups. 3. Simple statistics of PRI was similar to that of BERI on total movements in small scale, but there was a negative correlation between PRI and BERI on total movements in large sclae only in patients group.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.14 no.4
• /
• pp.113-125
• /
• 2012

This study, as one on the neck design of seamless knitwears, set out to make experimental clothes applying various knitting methods to the hem of round neck, seek the knitting methods of finishing touches on the ending part of round neck to enhance function and aesthetic appreciation through measuring tensile strength and assessing wearing sensation, and provide basic data that would be of practical help to developing the design of seamless knitwears and mass production in the national knit industry. The ending part of neck of the seamless knitwear is not only the last stage in making knitwear but also affects the function and appearance of the clothes. The investigator, thus made six different pieces of experimental clothes according to the finishing methods of knitting on the neck, then measured tensile strength and put them to the test by a group of experts for the assessment of wearing sensation. The results were analyzed based on variance analysis(ANOVA), and the items with similar results were put to the Duncan test for intergroup comparison. According to the analysis results of measuring tensile strength, Experimental Clothes B received the highest evaluation, Experimental Clothes E the lowest. Also Experimental Clothes B was ranked the highest in almost every evaluation criteria, whereas Experimental Clothes E was ranked the lowest in the assessment of wearing sensation.