• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.24 no.6
• /
• pp.715-722
• /
• 2011

In this paper, the behavior of nuclear-power plant subjected to an aircraft impact is performed using the parallel analysis. In the erstwhile study of an aircraft impact to the nuclear-power plant, it has been used that the impact load is applied at the local area by using the impact load-time history function of Riera, and the target structures have been restricted to the simple RC(Reinforced Concrete) walls or RC buildings. However, in this paper, the analysis of an aircraft impact is performed by using a real aircraft model similar to the Boeing 767 and a fictitious nuclear-power plant similar to the real structure, and an aircraft model is verified by comparing the generated history of the aircraft crash against the rigid target with another history by using the Riera's function which is allowable in the impact evaluation guide, NEI07-13(2009). Also, in general, it is required too much time for the hypervelocity impact analysis due to the contact problems between two or more adjacent physical bodies and the high nonlinearity causing dynamic large deformation, so there is a limitation with a single CPU alone to deal with these problems effectively. Therefore, in this paper, Message-Passing MIMD type of parallel analysis is performed by using self-constructed Linux-Cluster system to improve the computational efficiency, and in order to evaluate the parallel performance, the four cases of analysis, i.e. plain concrete, reinforced concrete, reinforced concrete with bonded containment liner plate, steel-plate concrete structure, are performed and discussed.

• The Journal of Korean Academy of Prosthodontics
• /
• v.31 no.1
• /
• pp.129-150
• /
• 1993

Since the restoration or masticatory function is the most important aim of implants, it should be substituted for the role of natural teeth and deliver the stress to the bone under the continous load during function. In natural teeth, stress distribution can be obtained through enamel, dentin and cementum and the elasticity of the periodontal ligament play a role of buffering action. In contrast, implant prosthesis has a very unique characteristics that it delvers the load directly to bone through the implant and superstructure. This fact arise the needs to evaluate the stress distribution of the implant in the mechnical aspects, which has a similar role of natural teeth but different pathway of stress. With 3 kinds of implant in prevalent use, 2 types of experimental PEA implant models were made, axisymmetric and 2-dimensional type. In axisymmetric model, the stiffness of the part including the prosthesis and implant which extrude out of bony surface could be calculated with displacement of the superstructure un er 100N vertical load and then damping effects could be determined through this stiffness. In axisymmetric FEA model, load to the bone could be deduced by evaluation the stress distribution of the designed surface under the 100N vertical force and in 2-dimensional model, 100N eccentric vertical load and 20N horizontal loda. The result are as follows. 1. In every implant, stress to the bone tends to be concenturated on the cortical bone. 2. Though the stress of the cancellous bone is larger at the apex of implants, it is less compared with cortical bone. 3. Under 20N horizontal load, stress of the left and right sides of implant shows a symmetrical pattern. But under 100N eccentric vertical load, loaded side shows much larger stress value. 4. In the 1mm interface, stress distribution among implants tend to have a similar pattern. But under 20N horizontal load apposite side of being loaded shows less stress in IMZ. 5. In the case of screw type implant, stress tends to vary along with screw shape. 6. According to the result determined with microstrain, cancellous bone id generally under the condition of overload, while cortical bone is usually within the limitation of physiologic load. 7. In the Branemark implant, maximum stress to the cortical bone is larger than any other implant except for the condition of 20N horizontal force and 0.05mm interface. 8. Damping effects of implants is maximum in IMZ.

• Korean Journal of Food Science and Technology
• /
• v.31 no.1
• /
• pp.176-182
• /
• 1999

Whole soybean cereal was fermented with four fungal strains (Mucor and Rhizopus) in pilot meju fermentation system. The pH range of the fermented soybean cereal was $7.16{\sim}8.38$, the contents of reducing sugar and amino-nitrogen were $0.54{\sim}2.64%,\;93{\sim}312mg%$, respectively, and that of free fatty acid ranged $0.06{\sim}2.00%$. The components of the amino acid, organic acid, free sugars and fatty acid showed distinctive patterns among four groups of fermented soybean cereals. Amylase activity and carbohydrate degradation rate of R. oryzae, protease and protein degadation rate of R. stolonifer was higher than other strains. But lipase and lipid degradation rates of four strains were similar. The odor concentrates of the soybean cereals fermented with Mucor strains were similar to Aspergillus strains, but Rhizopus were possessed of the flavor components of Bacillus and Aspergillus. Soysauce, made from M. hiemalis and R. stolonifer fermented soybean cereal showed excellent sensory evaluation and it was proposed that the two strains will be useful in Korean soysauce process.

• Journal of Engineering Education Research
• /
• v.5 no.1
• /
• pp.34-49
• /
• 2002

The School of Electrical Engineering and School of Civil, Urban, and Geosystem Engineering of Seoul National University (SNU) have conducted alumni surveys to evaluate the importance and preparedness of the engineering outcomes that are demanded in the industry and to feedback the survey results to the establishment of educational objectives and student capability and the revision of curricula. In this paper, first we analyzed the collected data to see the distributions of the respondents in terms of graduation year, profession, final degree, and so on. Second we evaluated the importance and preparedness of the engineering outcomes and compared them with those obtained at the Department of Mechanical and Aerospace Engineering of UCLA. The above-mentioned three groups gave very similar evaluation of the importance of each item of engineering outcomes, showing that the industry-demanding engineering outcomes are very similar regardless of country or major. Investigating the difference between the importance and preparedness, SNU showed relatively low preparedness compared to UCLA, meaning that SNU is somewhat behind UCLA in engineering education. On the other hand, all the three groups showed considerably poor preparedness in the abilities to function on multi-disciplinary teams and to communicate effectively, indicating that is needed education to strengthen these abilities.

• The Korean Journal of Physiology
• /
• v.9 no.2
• /
• pp.7-15
• /
• 1975

The maximum breathing capacity (MBC) and the maximum mid-expiratory flow rate (MMF) are widely used in evaluation of the ventilatory function, among various parameters of pulmonary function. The MBC volume is the amount of gas which can be exchanged per unit time during maximal voluntary hyperventilation. Performance of this test, unlike that of single breath maneuvers, is affected by the integrity of the respiratory bellows as a whole including such factors are respiratory muscle blood supply, fatigue, and progressive trapping of air. Because of this, the MBC and its relation to ventilatory requirement correlates more closely with subjective dyspnea than does any other test. The MMF is the average flow rate during expiration of the middle 50% of the vital capacity. The MMF is a measurement of a fast vital capacity related to the time required for the maneuver and the MMF relates much better to other dynamic tests of ventilatory function and to dyspnea than total vital capacity, because the MMF reflects the effective volume, or gas per unit of time. Therefore, it is important to have a prediction formula with one can compute the normal value for the subject and the compare with the measured value. However, the formulas for prediction of both MBC and MMF of the Korean children and adolescents are not yet available in the present. Hence, present investigation was attempt to derive the formulas for prediction of both MBC and MMF of the Korean children and adolescents. MBC and MMF were measured in 1,037 healthy Korean children and adolescents (1,035 male and 1,002 female) whose ages ranged from 8 to 18 years. A spirometer (9L, Collins) was used for the measurement of MBC and MMF. Both MBC and MMF were measured 3times in a standing position and the highest values were used. For measurement, the $CO_2$ absorber and sadd valve were removed from the spirometer in order to reduce the resistance in the breathing circuit and the subject was asked to breathe as fast and deeply as possible for 12 seconds in MBC and to exhale completely as fast as possible after maximum inspiration for MMF. During the measurement, investigator stood by the subject to give a constant encouragement. All the measured values were subsequently converted to values at BTPS. The formulas for MBC and MMF were derived by a manner similar to those for Baldwin et al (1949) and Im (1965) as function of age and BSA or age and height. The prediction formulas for MBC (L/min, BTPS) and MMF (L/min, BTPS) of the Korean children and adolescents as derived in this investigation are as follows: For male, MBC=[41.70+{$2.69{\times}Age(years)$}]${\times}BSA$ $(m^{2})$ MBC=[0.083+{$0.045{\times}Age(years)$}]${\times}Ht$ (cm) For female, MBC=[45.53+{$1.55{\times}Age(years)$}]${\times}BSA$ $(m^2)$ MBC=[0.189+{$0.029{\times}Age(years)$}]${\times}Ht$ (cm) For male, MMF= [0.544+{$0.066{\times}Age(years)$}]${\times}Ht$ (cm) For female, MMF=[0.416+{$0.064{\times}Age(years)$}]${\times}Ht$ (cm)

• Journal of the East Asian Society of Dietary Life
• /
• v.24 no.3
• /
• pp.325-334
• /
• 2014

The effects of aloe on liver function and lipid metabolic disorders induced by alcohol consumption were studied in rats using aloe power (0.25%, 0.5%, 1%) and 10% ethanol. 35 Sprague-Dawley (male, 4 weeks old) rats were divided into five groups and fed experimental diets for six weeks. Body weights of rats tended to be lower in all alcohol supplemented groups than in the control. Food intakes and dry feces per day were significantly lower in all alcohol supplemented groups than in the control. Atherogenic indices (AI) were highest in the alcohol group and decreased in proportion with aloe amount. Serum triglyceride level was significantly higher in the alcohol group than in the control, but tended to be lower in the aloe supplemented groups. In relation to liver function, glutamate oxaloacetate transaminase (GOT), glutamate pyruvate transaminase (GPT), and alkaline phosphatase (ALP) activities tended to be higher in the alcohol groups than in the control, but lower in the aloe groups, especially in the alcohol+0.5% AO group. The levels of liver cholesterol were significantly lower in the alcohol group than in the control and aloe supplemented groups. In the histochemical evaluation, fat droplets appeared extensively on the liver-lobule in the alcohol group, whereas they decreased slightly in the alcohol+0.25% AO group and apparently disappeared in the alcohol +0.5% AO. On the other hand, fat droplets appeared again on the liver-lobule in the alcohol+1% AO group, but were reduced compared with the alcohol group. Regarding the fatty acid composition of adipose tissue triglycerides, the level of linoleic acid (18:2) was significantly higher in the aloe supplemented group. Regarding the fatty acid composition of liver phosphatidylcholine (PC), the level of linoleic acid was higher in the alcohol group and alcohol+1% AO group than the other groups. In contrast, the level of arachidonic acid was significantly lower in the alcohol group. As a result, arachidonic / linoleic acid ratios were significantly lower in the alcohol group compared to the control group, whereas the ratios of the aloe supplemented groups were similar to that of the control group. Therefore, aloe had some beneficial effects on lipid metabolic disorders induced by alcohol and affected desaturation of fatty acids.

• Journal of KIISE:Databases
• /
• v.34 no.6
• /
• pp.546-553
• /
• 2007

As ontologies are used widely, interest for semantic similarity search is also increasing. In this paper, we suggest a query evaluation scheme for k-nearest neighbor query, which retrieves k most similar objects to the query object. We use the best match method to calculate the semantic similarity between objects and use the signature tree to index annotation information of objects in database. The signature tree is usually used for the set similarity search. When we use the signature tree in similarity search, we are required to predict the upper-bound of similarity for a node; the highest similarity value which can be found when we traverse into the node. So we suggest a prediction function for the best match similarity function and prove the correctness of the prediction. And we modify the original signature tree structure for same signatures not to be stored redundantly. This improved structure of signature tree not only reduces the size of signature tree but also increases the efficiency of query evaluation. We use the Gene Ontology(GO) for our experiments, which provides large ontologies and large amount of annotation data. Using GO, we show that proposed method improves query efficiency and present several experimental results varying the page size and using several node-splitting methods.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.4
• /
• pp.1-13
• /
• 2009

VMS(Variable Message Sign) which makes the traffic flow smooth by providing traffic information to road users in real-time has been being installed or operated on the road as part of the detailed ITS system. However, some problems were found as a result of survey on express way currently. In the part of the phase operation, the message interpretation time wasn't defined so that the phase operation was difficult. In the part of the information service, not considering characteristic of the VMS section caused the confusion to drivers. In the part of the message exposure, font, alignment, conversion and composition of the information were not consistent and use of superfluous words and inconsistent use of word having the same meaning brought about the problem on information communication This study established the detailed exposure method based on instructions relative to VMS operation. The method established by defining the number of appropriate phase and setting required function of each individual VMS installation location. The method is as follow. the font type is the GULIM, the message conversion method is simple conversion method, the alignment method is centering alignment method and the color is defined according to each situation. In this study, the preference survey was performed to review the validity of the proposed improvement through the common driver. The results were similar with the pre-study except for the font type. This study established the detailed exposure method based on instructions relative to VMS operation. The method established by defining the number of appropriate phase and setting required function of individual VMS installation location. For the evaluation of status and improvement, preference survey of ordinary drivers and statistics analysis was carried.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.12
• /
• pp.1696-1701
• /
• 2006

A random regression model was applied for the first time for the analysis of test day records and to study the genetic persistency of first lactation milk yield of Indian Murrah buffaloes. Wilmink's Function was chosen to describe the shape of lactation curves. Heritabilities of test day milk yield varied from 0.33 to 0.58 in different test days. The highest heritability was found in the initial test day ($5^{th}$ day) milk yield. Genetic correlations among test day milk yields were higher in the initial test day milk yield and decreased when the test day interval was increased. The magnitude of genetic correlations between test day and 305 day milk yield varied from 0.25 to 0.99. The genetic persistencies of first lactation milk yield were estimated based on daily breeding values using two methods. $P_1$ is the genetic persistency estimated as a summation of the deviation of estimated daily breeding value on days to attain peak yield from each day after days to attain peak yield to different lactation days. $P_2$ is the genetic persistency estimated as the additional genetic yield (gained or lost) from days to attain peak yield to estimated breeding value on different lactation days relative to an average buffalo having the same yield on days to attain peak yield. The mean genetic persistency on 90, 120, 180, 240, 278 and 305 days in milk was estimated as -4.23, -21.67, -101.67, -229.57, -330.06 and -388.64, respectively by $P_1$, whereas by $P_2$ on same days in milk were estimated as -3.96 (-0.32 kg), -23.94 (-0.87 kg), -112.81 (-1.96 kg), -245.83 (-2.81 kg), -350.04 (-3.28 kg) and -407.58 (-3.40 kg) respectively. Higher magnitude of rank correlations indicated that the ranking of buffaloes based on their genetic persistency in both methods were similar for evaluation of genetic persistency of buffaloes. Based on the estimated range of genetic persistency three types of genetic persistency were identified. Genetic correlations among genetic persistency in different days in milk and between genetic persistencies on the same day in milk were very high. The genetic correlations between genetic persistency for different days in milk and estimated breeding value for 305 DIM was increased from 90 DIM to 180 DIM, and highest around 240 DIM which indicates a minimum of 240 days as an optimum first lactation length might be required for genetic evaluation of Indian Murrah buffaloes.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.39 no.6
• /
• pp.563-569
• /
• 2021

With the launch of Compact Advanced Satellite 500 series of various characteristics and the operation of KOMPSAT-3/3A, uses of high-resolution satellite images have been continuously increased. Especially, in order to provide satellite images in the form of ARD (Analysis Ready Data), various pre-processing such as geometric correction and radiometric correction have been developed. For pre-processing of high spatial satellite imagery, auxiliary information, such as solar zenith, solar azimuth and offnadir angle, should be required. However, most of the high-resolution satellite images provide the solar zenith and nadir angle for the entire image as a single variable. In this paper, the solar zenith and offnadir angle corresponding to each pixel of the image were calculated using RFM (Rational Function Model) and auxiliary information of the image, and the quality of extracted information were evaluated. In particular, for the utilization of pixel-based solar zenith and offnadir angle, pixel-based auxiliary data were applied in calculating the top of atmospheric reflectance, and comparative evaluation with a single constant-based top of atmospheric reflectance was performed. In the experiments using various satellite imagery, the pixel-based solar zenith and offnadir angle information showed a similar tendency to the auxiliary information of satellite sensor, and it was confirmed that the distortion was reduced in the calculated reflectance in the top of atmospheric reflectance.