• Journal of Adhesion and Interface
• /
• v.24 no.2
• /
• pp.54-59
• /
• 2023

Silver nanowire-based transparent electrodes are very attractive as a next-generation flexible and transparent electrode that can replace ITO-based flexible electrodes because they have excellent conductivity, transmittance and mechanical flexibility. However, weak understanding of the silver nanowire solution for the fabrication of silver nanowire-based transparent electrodes often cause abnormal operation of the electrical device or peeling problem of the electrode films when applied to electronic devices. Here, we studied a Hydroxypropyl Methylcellulose (HPMC) adhesion promoter, which is one of the additives for silver nanowire solution, to improve the understanding of silver nanowire solution. In detail, it is characterized how the HPMC changes the properties of silver nanowire solution and silver nanowire film, which is fabricated with silver nanowire solution including the HPMC adhesion promoter. As the characteristics of solution, polar surface tension and dispersive surface tension were measured. As the film characteristics, surface energy, surface morphology, silver nanowire density, and sheet resistance were analyzed.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.51 no.1
• /
• pp.80-87
• /
• 2024

Silver diamine fluoride, which can arrest dental caries, is alkaline and may cause mild soft tissue irritation. Water-based silver fluoride has a neutral pH, which is closer to the physiological range, and is biocompatible for use in the oral environment. This study aimed to evaluate the effect of water-based silver fluoride on remineralizing early enamel lesions by comparing it with other fluoride agents through microhardness and quantitative light-induced fluorescence measurements. An in vitro study with intact bovine incisors was performed. Artificial enamel lesions were induced and subjected to microhardness and quantitative light-induced fluorescence testing. Specimens were randomly divided into 4 groups for treatment. The specimens in group I were treated with water-based silver fluoride and potassium iodide, group II with silver diamine fluoride and potassium iodide, group III with sodium fluoride varnish, and group IV with distilled water. After 8 days of pH cycling, the specimens were subjected to microhardness and quantitative light-induced fluorescence testing. Water-based silver fluoride and silver diamine fluoride showed the greatest increases in microhardness and quantitative light-induced fluorescence, with no significant differences between the two. Sodium fluoride varnish also exhibited a significant increase in microhardness and quantitative light-induced fluorescence, but the differences were smaller than those for water-based silver fluoride and silver diamine fluoride. Water-based silver fluoride is considered useful in a clinical setting for remineralizing enamel lesions, with the advantages of no risk of tissue burn and improved taste and smell.

• Journal of the Korean Chemical Society
• /
• v.17 no.5
• /
• pp.319-323
• /
• 1973

The state of carrier-free silver-111 has been studied by applying filtration method. The studies involved that the effects of pH and concentration of silver-111 in aqueous solution have been determined with membrane filters. The present studies revealed that the retainment of silver-111 on membrane filters followed Freundlish adsorption isotherm, and the adsorbed state of silver-111 was present in the form of AgOH. Also it was supposed that the formation of the non-adsorbed hydroxide of$Ag(OH)_{2}-$ may prohibit the existance of AgOH at higher pH, and it seems to be valid that the carrier-free silver-111 in aqueous solution exists in$Ag^+$state.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.8
• /
• pp.2635-2641
• /
• 2012

Novel silver/salep-g-poly(acrylic acid) nanocomposite hydrogel were prepared in aqueous solution using poly(acrylic acid) grafted onto salep as a biopolymer based material. FT-IR spectra confirmed that poly(acrylic acid) (PAA) had been grafted onto salep in graft copolymerization reaction. TEM observations showed that silver nanoparticles have been uniformly dispersed in polymeric matrix. Effects of pH, acrylic acid (AA) amount and silver ion concentration on swelling capabilities were investigated. Results indicate that modifying AA and silver ion can improve swelling properties of the resultant nanocomposite hydrogel. pH response of this nanocomposite hydrogel in acidic and neutral pH made it suitable for drug delivery applications.

• Corrosion Science and Technology
• /
• v.7 no.2
• /
• pp.130-133
• /
• 2008

Corrosion of silver by outgassed sulfur species from rubber has been investigated by means of quartz crystal microbalance technique (QCM) and cathodic reduction technique. Silver specimens were placed together with a rubber of predefined quantity in an enclosed environment. Corrosion progressed linearly with time and silver sulfide was found as the corrosion product during all the tests. No significant dependence on RH was observed, while the corrosion rate increased as temperature rose. Furthermore the corrosion rate increased logarithmically with the quantity of the rubber placed in the exposure environment. It may be suggested that the corrosion rate of silver is determined by the amount of outgassed sulfur species which is a function of temperature and the quantity of rubber contained in the exposure environment.

• International Journal of Aerospace System Engineering
• /
• v.1 no.1
• /
• pp.44-47
• /
• 2014

This study proposes a development for the nano silver adhesive, which is applicable to high efficiency LED(light-emitting diode) light. The important issue of LED light is heat exhaust from LED. Generally, the middle area of LED light is increased up to 380K. Therefore, the bottleneck between LED chip and heat sink are caused by high temperature. In this work, the adhesive material between LED Chip and heat sink was newly developed for improvement of bottleneck. The nano silver was adopted to solve heat problem of chip on board package for LED light. In order to evaluate the performance of the nano silver adhesive, the thermal analysis was performed. Moreover both adhesive performance and heat exhaust were verified through the prototype test. From the experimental test results, it is found that the developed nano silver adhesive has the high performance.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.307-307
• /
• 2006

The reduction behavior of silver ions to silver nanoparticles is an important research topic in polymer/silver salt complex membranes for facilitated olefin transport, because it has a significant effect on the long-term stability of membrane performance. In this study, the effects of solvent on the formation of silver nanoparticles and long-term membrane performance in polymer/silver salt complex membrane were investigated. This effect was assessed for the complexes of poly(N-vinyl pyrrolidone) $(PVP)/AgBF_{4}$ with the use of ionic liquid (IL), acetonitrile (ACN) and water as a solvent. Membrane performance test shows that long-term stability is strongly dependent on the kind of solvent and arranged: IL > ACN >> water.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2008.10a
• /
• pp.118-121
• /
• 2008

The purpose of this study was to evaluate the wearing sensation of T-shirts made with silver combination yarns. The four different single jersey fabrics were knitted to make long sleeve T-shirts: cotton(C), cotton/silver(CS), polyester(P), and polyester/silver(PS). The four kinds of T-shirts were evaluated by six healthy male subjects in a climatic chamber($25^{\circ}C$, 65%RH, 0.5m/sec). The results were as follows. Thermal and fatigue sensation of wearing CS was best. It was found that overall subjective sensation was improved by using silver yarn with cotton for health knitwear.

• Journal of the Korean Chemical Society
• /
• v.36 no.1
• /
• pp.24-27
• /
• 1992

Silver sols are aggregated by a Cu or Zn rod. This is maybe due to the reduction of $Ag^+$ ion on the surfaces of silver sols to Ag metal by oxidation-reduction reaction with Cu or Zn metal. Raman spectra of silver sols aggregated by a Cu rod have been studied. The evidence of borate and nitrate ions adsorbed on silver colloid surfaces is found. It is also found that these ions adsorbed on silver colloid surfaces are easily replaced by adsorbated added.

• Korean Journal of Materials Research
• /
• v.25 no.10
• /
• pp.537-542
• /
• 2015

One-dimensional (1D) silver nanostructures, which possess the highest conductivity among all room-temperature materials, moderate flexibility and high transmittance, are one of the most promising candidate materials to replace conventional indium tin oxide transparent electrodes. However, the short length and large diameter of 1D silver nanostructures cause a substantial decrease in the optical transparency or an increase in the sheet resistance. In this work, ultra-long silver nanofiber networks were synthesized with a low-cost and scalable electrospinning process, and the diameter of the nanofibers were finetuned to achieve a higher aspect ratio. The decrease in the diameter of the nanofibers resulted in a higher optical transparency at a lower sheet resistance: 87 % at $300{\Omega}/sq$, respectively. It is expected that an electrospun silver nanofiber based transparent electrode can be used as a key component in various optoelectronic applications.