• 한국지반환경공학회 논문집
• /
• 제21권11호
• /
• pp.21-26
• /
• 2020

자연상태의 흙은 다양한 크기의 입자로 구성되어 있으며, 이 흙의 역학적 거동 중 전단거동은 입도 분포에 크게 영향을 받는다. 그리고 자연상태의 흙은 조립토와 세립토가 다양하게 혼합되어 존재하기 때문에 그 역학적 성질인 전단특성을 명확히 파악하기 어렵다. 이에 본 연구에서는 흙의 입도 분포가 흙의 전단특성에 미치는 영향을 확인하기 위한 목적으로 조립토는 모래를 세립토는 실트를 이용해 모래에 대한 실트의 함유량을 변화시켜 입도 분포가 다른 사질토를 조성한 후 링 전단시험을 수행하였다. 그리고 물 공급 시 입도 분포가 다른 사질토의 전단특성 변화를 확인하기 위해 링 전단시험 중 물을 공급하여 실험을 수행하였다. 그 결과 실트 함유량이 증가할수록 전단강도는 점차 증가하다 실트 함유량이 모래보다 많아지면 전단강도는 감소하는 것으로 나타났다. 그리고 수분 공급 시 실트 함유량에 따라 잔류전단강도는 완만한 경사를 나타내며 감소하는 것으로 나타났다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.1528-1537
• /
• 2005

The purpose of this study is investigated the method for estimation of the liquefaction on the reclaimed land, located in Incheon and assessed the ability of liquefaction under the condition of criteria, which is the magnitude '6.5' of seismic on the basis of the domestic seismic characteristics. Performed not only field test but the experiment as well to study how the fine content would affect into the dreging and reclaimed land and also estimated the safety factor through the empirical method and anticipated detail method based on the results. Within the reclaimed land, there are many sized soils which are almost extended from well-graded silty sand(SM) to poor-graded fine grained sand, and which have the condition, so called, the liquefaction which is easily to bring into under the circumstances within the ground. However, partly, now that the soil is mixed with silt and silty clay which include the content of fine grained dust quite a bit, the difficulties and inconveniences has been expected while trying to find the ratio of cyclic resistance, but finally Seed and Idriss method showed the most way when we estimate the safety factor on the liquefaction.

• Journal of the korean society of oceanography
• /
• 제32권3호
• /
• pp.120-127
• /
• 1997

Depositional environment off the Shihwa Dam has been studied to investigate the change of sedimentation process and the pollution. In order to understand how the sediments are distributed, polluted and modified, depositional factors have been analyzed and compared with the previous data. Study area, located off the Shihwa Dam, was surveyed to collect 25 bottom samples and 2 cores in 1996 and echo-sounding in 1997. These sediments were analyzed for the study of the global characteristics of sediment such as grain size and organic matter. Among these samples, the selected twenty surface sediments were analyzed for the comparison with their contents of metallic elements (Al, Mn, Fe, V, Cr, Co, Ni, Cu, Zn, Cd, Pb, As). According to field and lab analysis of sediments, three sedimentological zones have been generally identified around study area; near the dam (sandy Silt), near the dike (Sand) and offshore (silty Sand) zones. Textural parameters show that the content of silt and clay is dominant near the dam excepting the dike zone of LNG Storage Base and offshore (Palmido). The total concentration of Mn, Ni, Fe, Zn and Cd in bulk sediments was increased after the construction of the dam, while the content of Mn and Cr were higher near tidal channel than in the offshore area. Meanwhile, the annual increasing pattern of some heavy metal has appeared in this area. Based on this primary study, modification of the depositional environment may be caused by the construction of the dam and LNG Storage Base. Additionally, environmental evaluation on organic/inorganic factors has been suggested for interpreting environmental changes caused by coastal development in the nearshore such as the Shihwa coastal area.

• Geomechanics and Engineering
• /
• 제36권3호
• /
• pp.295-301
• /
• 2024

Understanding the post-liquefaction shear behavior is crucial for predicting and assessing the damage, such as lateral flow, caused by liquefaction. Most studies have focused on the behavior until liquefaction occurs. In this study, we performed undrained multi-stage tests on clean sand, sand-silt mixtures, and silty soils to investigate post-liquefaction shear strain based on soil compressibility. The results confirmed that it is necessary to consider the soil compressibility and the shape of soil particles to understand the post-liquefaction shear strain characteristics. Based on this, an index reflecting soil compressibility and particle shape was derived, and the results showed a high correlation with post-liquefaction small resistance characteristic regardless of soil type and fine particle content.

• 한국농공학회지
• /
• 제35권2호
• /
• pp.43-56
• /
• 1993

The laboratory tests are performed on how the liquefaction potential of the sea dike structures on the saturated sand or silty sand seabed could be affected due to earthquake before and after construction results are given as follows ; 1. Earthquake damages to sea dike structures consist of lateral deformation, settlement, minor abnormality of the structures and differential settlement of embankments, etc. It is known that severe disasters due to this type of damages are not much documented. Because of its high relative cost of the preventive measures against this type of damages, the designing engineer has much freedom for the play of judgement and ingenuity in the selection of the construction methods, that is, by comparing the cost of the preventive design cost at a design stage to reconstruction cost after minor failure. 2. The factors controlling the liquefaction potential of the hydraulic fill structure are magnitude of earthquake(max. surface velocity), N-value(relative density), gradation, consistency(plastic limit), classification of soil(G & vs), ground water level, compaction method, volumetric shear stress and strain, effective confining stress, and primary consolidation. 3. The probability of liquefaction can be evaluated by the simple method based on SPT and CPT test results or the precise method based on laboratory test results. For sandy or silty sand seabed of the concerned area of this study, it is said that evaluation of liquefaction potential can be done by the one-dimensional analysis using some geotechnical parameters of soil such as Ip, Υt' gradation, N-value, OCR and classification of soils. 4. Based on above mentioned analysis, safety factor of liquefaction potential on the sea bed at the given site is Fs =0.84 when M = 5.23 or amax= 0.12g. With sea dike structures H = 42.5m and 35.5m on the same site Fs= 3.M~2.08 and Fs = 1.74~1.31 are obtained, respectively. local liquefaction can be expected at the toe of the sea dike constructed with hydraulic fill because of lack of constrained effective stress of the area.

• 한국지반공학회논문집
• /
• 제22권1호
• /
• pp.35-44
• /
• 2006

일반적으로 현장지반은 대부분 일정량의 세립분을 포함하고 있으므로 세립분 함유량을 고려한 지반 거동에 관한 연구가 요구된다. 이와 더불어, 기초 지반은 하중초기단계부터 상당한 비선형 거동특성을 나타내고 있어, 응력단계에 따른 지반의 비선형성 또한 매우 중요한 고려사항이다. 본 연구에서는 일련의 실내시험을 수행하여 지반의 전단강도 및 비선형 감쇠 특성을 도출하고자 하였으며, 수정 Hyerbolic 모델을 적용하여 분석된 실트질 모래 지반의 비선형 거동특성은 실트함유량과 상대밀도에 의해 정량화되었다. 실트질 모래 시료의 응력-변형률 곡선을 도출하기 위해 세립분 함유량을 변화시켜가며 일련의 삼축압축시험이 수행되었다. 또한 비선형 특성의 정규화에 요구되는 미소변형률 구간의 초기전단탄성계수의 도출을 위해서 삼축압축시험의 시료조건과 유사한 시료에 대해 공진주시험이 수행되었다. 또한 실트함유량별로 도출된 비선형 특성치는 상대밀도의 영향이 가장 큰 것으로 나타났으며, 상대밀도 증가에 따라 파괴시의 탄성계수의 비인 f값은 감소하고, 지반강성도 감쇠율을 나타내는 9의 경우 증가하는 경향을 나타내었다. 이와 더불어 비선형 특성치를 상대밀도 $D_R$을 간극비로 환산한 절대적 간극비 $e_{sk}$에 따른 정량화 결과의 경우, $e_{sk}$의 증가에 따라 f값은 증가하고 g값은 감소하는 경향을 나타내었다.

• 한국지반공학회지:지반
• /
• 제14권1호
• /
• pp.59-70
• /
• 1998

국내 해안에 퇴적된 실트질 모래와 hydraulic fill한 지반에서 채취한 시료의 액상화 강도 측정을 위해 응력제어 진동삼축압축시험을 수행하였다. 이를 위해 1) 불교란시료와 교란시료의 액상화 강도 산정과 2) 등방 압밀된 시료와 비등방 압밀된 시료의 반복삼축시험결과 비교, 3) 본 시험결과와 국내 다른 시험자료 및 외국의 결과를 비교하였다. 등방 압밀 시료의 액상화 강도는 시료의 상대밀도에 따라 나타내었다. 실트질 함유량이 30%이하의 경우 액상화 강도는 실트질 영향을 거의 받지 않음이 나타났다. 비등방 압밀된 시료의 액상화 강도는 수직응력을 구속응력으로 나눈 유효압밀비에 영향을 받는다. 본 연구의 시험결과 한국 서해안의 실트질 모래의 액상화 강도는 Seed and Pea cock(1971)가 제안한 범위에서 내에 있음을 알 수 있다.

• Geomechanics and Engineering
• /
• 제30권3호
• /
• pp.247-258
• /
• 2022

A field velocity resistivity probe (FVRP) can measure compressional waves, shear waves and electrical resistivity in boreholes. The objective of this study is to perform the soil classification through a machine learning technique through elastic wave velocity and electrical resistivity measured by FVRP. Field and laboratory tests are performed, and the measured values are used as input variables to classify silt sand, sand, silty clay, and clay-sand mixture layers. The accuracy of k-nearest neighbors (KNN), naive Bayes (NB), random forest (RF), and support vector machine (SVM), selected to perform classification and optimize the hyperparameters, is evaluated. The accuracies are calculated as 0.76, 0.91, 0.94, and 0.88 for KNN, NB, RF, and SVM algorithms, respectively. To increase the amount of data at each soil layer, the synthetic minority oversampling technique (SMOTE) and conditional tabular generative adversarial network (CTGAN) are applied to overcome imbalance in the dataset. The CTGAN provides improved accuracy in the KNN, NB, RF and SVM algorithms. The results demonstrate that the measured values by FVRP can classify soil layers through three kinds of data with machine learning algorithms.

• Geomechanics and Engineering
• /
• 제16권5호
• /
• pp.547-558
• /
• 2018

Studies of soil dynamic properties in Malaysia are still very limited. This study aims to investigate the dynamic properties of two selected tropical residual soils (i.e., Sandy Clay and Sandy Silt) and a sand mining trail (Silty Sand) in Peninsular Malaysia using 1g shaking table test. The use of 1g shaking table test for soil dynamic testing is often constrained to large strain level and small confining pressure only. Three new experimental setups, namely large laminar shear box test (LLSBT), small chamber test with positive air pressure (SCT), and small sample test with suction (SSTS) are attempted with the aims of these experimental setups are capable of evaluating the dynamic properties of soils covering a wider range of shear strain and confining pressure. The details of each experimental setup are described explicitly in this paper. Experimental results show that the combined use of the LLSBT and SCT is capable of rendering soil dynamic properties covering a strain range of 0.017%-1.48% under confining pressures of 5-100 kPa. The studied tropical residual soils in Malaysia behaved neither as pure sand nor clay, but show a relatively good agreement with the dynamic properties of residual soils in Singapore. Effects of confining pressure and plasticity index on the studied tropical residual soils are found to be insignificant in this particular study.

• 한국지반공학회논문집
• /
• 제24권11호
• /
• pp.157-166
• /
• 2008

경량기포혼합토(LAS)의 일축압축강도($q_u$)와 변형계수($E_{50}$)에 영향을 미치는 인자를 분석하기위해 모래, 실트, 점토의 함유율이 서로 다른 건설발생토(원료토)를 이용하여 일축압축강도시험을 수행하였다. 일축압축강도시험 분석결과 동일 원료토에서 LAS의 목표단위중량(${\gamma}_m$) 및 시멘트 첨가량($C_i$)이 강도-변형특성의 지배인자로 분석되었으며, 서로 다른 원료토에서는 단위중량과 시멘트 첨가량이 동일할 경우 원료토의 입도분석시험(KS F2302)결과 산출된 모래, 실트, 점토의 상호비율과 강도-변형특성의 관계를 제시하였다. 양생일에 따른 LAS의 강도발현속도는 원료토내 점토의 함유율($C_%$)이 증가할수록 강도발현을(a)은 저하되는 것으로 나타났다.