• Journal of The Korean Society of Grassland and Forage Science
• /
• v.38 no.2
• /
• pp.99-105
• /
• 2018

This study was carried out to estimate the effect of selected inoculants on chemical compositions and fermentation characteristics of rye silage. Rye was harvested at dough stage and divided into 5 treatments, following: No additives (CON); L. plantarum R48-27 (LP27); L. buchneri R4-26 (LB26); Mixture of LP27 and LB26 at 1:1 ratio (MIX); and L. buchneri (LB). The rye forage was ensiled into 10 L bucket silo for 100 days. The contents of NDF and ADF were lowest (P<0.05) in LB26. The pH in LB26, MIX, and LB were lower (P<0.05) than CON and LP27. Lactate content in LB was higher (P<0.05) than the others, while acetate content in LB26 and LB were higher (P<0.05) than that in CON and LP27. Lactate to acetate ratio was highest (P<0.05) in LB, but lowest in LB26. Lactic acid bacteria (LAB) count in LB was higher (P<0.05) than that in CON, while yeast count in CON was lower than in all silages applied inoculants. In conclusion, silages inoculated with LB26 could improve potentially the aerobic stability caused by increases of acetate and propionate concentrations.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.30 no.4
• /
• pp.18-27
• /
• 1998

Biopulping is defined as the treatment of wood chips with lignin-degrading fungi prior to pulping. Fungal pretreatment prior to mechanical pulping reduces electrical energy requirements during refining or increases mill throughput, improves paper strength, reduces the pitch content, and reduces the environmental impact of pulping. Our recent work involved scaling up the biopulping process towards the industrial level, investigating both the engineering and economic feasibility. We envision the process to be done in either a chip-pile or silo-based system for which several factors need to be considered: the degree of decontamination, a hospitable environment for the fungus, and the overall process economics. Currently, treatment of the chips with low-pressure steam is sufficient for decontamination and a simple, forced ventilation system maintains the proper temperature, humidity, and moisture conditions, thus promoting uniform growth of the fungus. The pilot-scale trial resulted in the successful treatment of 4 tons of wood chips (dry weight basis) with results comparable to those on a laboratory. Larger, 40-ton trials were also successful, with energy savings and paper properties comparable with the laboratory scale. The overall economics of the process also look very favorable and can result in significant annual savings to the mill. Although the current research has focused on biopulping for mechanical pulping, it is also beneficial for sulfite chemical pulping and some applications to recycled fiber have been investigated.

• Resources Recycling
• /
• v.19 no.2
• /
• pp.3-9
• /
• 2010

In most coal fired power plants, fly ashes collected from each of hoppers in the electrostatic precipitator are transported and stored in a silo. However the properties of the fly ashes collected from each of hoppers in electrostatic precipitator varies with the distance of the collection field from the boiler. The more distance hopper gets fly ash with larger specific surface area. Therefore, in electrostatic precipitator the hopper itself is expected to have the effect of classifying fly ashes. This study examines the physical, chemical and mineralogical properties of fly ash, collected from each of hoppers attached to an electrostatic precipitator in the coal fired power plant and looks into the possibility of the electrostatic precipitator being used as a classifier. Also, the study reviewed the possibility of acquiring high quality fly ash.

• Tunnel and Underground Space
• /
• v.26 no.5
• /
• pp.339-347
• /
• 2016

The world's first underground repository for low- and intermediate- level radioactive waste (SFR1) has been in operation since 1988. SFR1 can accommodate $1,000m^3$ of radioactive waste per year with 4 chambers and 1 silo with a total capacity of $63,000m^3$ of radioactive waste. With extended operation time of 10 of the 12 nuclear power reactors and dismantling of the other 2 nuclear reactors, more nuclear waste need to be disposed in the future. Therefore, Swedish Nuclear Fuel and Waste Management Company (SKB) submitted a license application for a repository extension (SFR3) that consists of 6 additional rock chambers with a capacity of $108,000m^3$ of radioactive waste and for accommodating 9 boiling water reactor tanks. In this study, plans for the extension SFR3 are presented with the geological, geomechanical and hydrogeological issues to be considered.

• The Korean Journal of Community Living Science
• /
• v.24 no.3
• /
• pp.391-397
• /
• 2013

This study was conducted to define the characteristics of the fan according to the bed depth of rough rice for the silo used in South Korea. In this study, the characteristics like air flow resistance and air flow rate of the fan were investigated for an independent blowing system with 1 fan and the serial blowing system with 2 fans. In the experiment, the depth of rough rice was determined by 0, 1, 2, 3.2 and 4.5 m for an independent blowing system and the depth of rough rice was 4.5 m for the serial blowing system. The air flow resistances of the blowing fan and the suction fan in an independent blowing system were 55 mmAq and 88 mmAq respectively. In addition, the air flow resistance of the serial blowing system was 61% lower than the blowing fan and 28% lower than the suction fan of the independent blowing system. The air flow rates of the blowing fan and the suction fan in the serial blowing system were 516 $m^3/min$, 570 $m^3/min$, respectively. The former was 22% higher than the blowing fan while the latter was 29% higher than the suction fan in the independence blowing system. In other words, the serial blowing system was superior to the independent blowing system in blowing characteristics because the air flow rate was lower and air flow resistance was higher than the independent blowing system. However, the fan power consumption of the serial blowing system was more than 100% comparing with the independent blowing system.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.46 no.4
• /
• pp.39-46
• /
• 2004

This experiment was carried out to study on the effect of surface coating on thermal insulation of farm structures to improve thermal resistance and reflective effect of solar radiation. Nine different types of experimental specimen were compared in the temperature variations of inside and outside; A, B, C, D. E and F types are box container and G, H and I types are drum container. The size of these containers is $1,500{\times}2,000{\times}2,500$ mm and ${\varphi}$ $280{\times}330$ mm, respectively. Specimen of 3-type box(A, B, C) is galvanized steel sheet of thickness 0.45 mm. D, E and F types are sandwich panel of the thickness 50 mm inserted with urethane, glass wool and polystyrene form, respectively. G, H and I types are paint pot using in general. The surface of A. D, E, F and I types didn't any treatment, B, C and G types were treated with thermal insulation coating on the outside surface(B, G) or the inside and outside surface(C). And H type was treated with water paint coating on the only outside surface. In general, the experimental results showed the following tendencies; In case of A, B and C types. it was found that the thermal insulation effect of types coated with thermal insulation coating was improved remarkably than that of no treatment. And the thermal insulation effect between steel sheet and sandwich panel type was nearly similar There was not a significant difference of thermal insulation effect between thermal insulation coating and water paint coating. In time of drum container filled with rough rice, The difference of heat transfer tendency and temperature variation among surface treatments was nearly similar that of box types of galvanized steel sheet. And there was time lag about 6 hours between the temperature of middle part of rice and that of inside or outside surface.

• Microbiology and Biotechnology Letters
• /
• v.10 no.3
• /
• pp.191-196
• /
• 1982

In order to prevent the losses of the rice by fungal deterioration during storage, fungal contaminants were isolated and identified from the grain samples (Milyang Nr.23) stored for seven months from December, 1978 to June, 1979 in silo, flat store and Tongari. Out of thirty cultures isolated from Korean paddy and brown rice samples, twenty seven species were identified, and there are eleven species of Aspergillus (A. caespitosus, A. condidus, A. chevalieri, A fischeri, A. fumigatus, A. flavus, A. nidulans, A. oryzae, A. ruber, A. sydowii, A. versicolor), five species of Penicillium (P. atramentosum, p. chrysogenum, P. cyaneofulvum, P. nototum, P. steckii), two species of each Alternaria (Al. faesiculata, Al. grisea) and Curvalaria (C, interseminata, C. tetromea), and one species of each Trichothecium roseum, Nigrospora sphaerica, Rhizopus nigricans, Fusarium spp., Mucor spp., Helminthosporium spp., and Gliocladiopsis spp. The major types of fungi grown on the surface of paddy during storage were A. flavus and A. candidus, while A. ruber and A. sydowii appeared in brown rice samples. And also A. candidus, A. versicolor and A. glacus groups were considered as major deteriorating microorganisms in stored brown and paddy rice in Korea.

• Journal of Microbiology and Biotechnology
• /
• v.4 no.4
• /
• pp.290-295
• /
• 1994

30 monoclonal antibodies (mAbs) were produced against Bacillus thuringiensis subsp. canadensis. Out of the these, 6 mAbs were selected for further studies. SDS-PAGE analyses of sonicated antigens of 10 8. thuringiensis strains showed that they generally had both predominant protein antigens of molecular weights of 45 kilodalton (kd) except for shandogiensis and konkukian, and 37kd except for israelensis, tochigiensis, and shandogiensis, respectively. These results indicate that 4kd and 37kd may be important for demonstrating common antigens except for a few strains of B. thuringiensis. In comparing the result of the westem blot using mAbs with that of using polyclonal antibodies to canadensis, we found that immunoreactive proteins of 99 and 39 kd were identified as common antigens, which might act as antigenic determinants, and might be surface or flagella antigens. Reactivities of mAbs with 41 strains of 8. thuringiensis demonstrated that mAbs of C-1, C-3, C-4, C-S and C-6 except C-2 did not recognize epitopes of thuringiensis, but that all of the mAbs recognized epitopes of galleriae, kurstaki, dakota, tolrJokuensis, silo, toguchini, and leesis. The potential applications of the mAbs we produced would be useful tools for the clarification of taxonomy, investigation of antigenic relationship between B. thuringiensis strains, and localization of specific surface and flagella antigens.

• Journal of Advanced Navigation Technology
• /
• v.20 no.6
• /
• pp.562-567
• /
• 2016

IoT is attracting attention as the development of the Internet and the spread of smart devices are rapidly increasing worldwide. As IoT is integrated into everyday life, the market is getting bigger. So, experts predict that IoT devices will grow to more than one trillion in a decade. Techniques related to IoT are also being developed steadily, and studies are underway to develop IoT in various fields. However, vendors launching IoT services do not interact with data from other platforms. Therefore, it is limited to growing into a big market by facing the obstacle called the silo phenomenon. To solve this problem, web technology attracts attention. Web technology can interact with data regardless of platform, and it can not only develop various services using the data, but also reduce unnecessary costs for developers. In this paper, we have studied a web - based open IoT system that can transmit data independently in real time to the IoT platform.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.12
• /
• pp.1722-1724
• /
• 2003

The possibility of using cotton stems as a roughage source in animal feeding was explored. Ground cotton stems (T2 and T3) or stems treated with 0.5% urea (T4 and T5) were ensiled with pearl millet green fodder in double lined plastic bags of 3 kg capacity for 50 days. Formic acid (0.4% v/v) was sprayed on T3 and T5 silages. The treatments were compared with pearl millet silage alone (T1) which constituted the control. All the bags were placed in the silo pit of pearl millet silage. Results indicated that urea treatment of cotton stems increased and formic acid application reduced dry matter loss of the silages. Inclusion of cotton stems in the silage significantly (p<0.05) increased CF, ADF, cellulose and ADL due to its higher cell wall content. The hemicellulose was significantly lower in T3 (16.7%) and T5 (22.52%) as compared to T2 (23.45%) and T4 (24.6%) due to formic acid application. Ammoniation significantly increased NH3-N content in T4 (0.202%) and formic acid controlled NH3-N level in T5 (0.107%).The in sacco dry matter digestibility was significantly higher (p<0.05) in formic acid preserved silages T3 and T5 (47.73 and 47.93%) as compared to silages without formic acid (44.94 and 41.22 %) in T2 and T4 respectively, but lower than T1 (54.39%). It is concluded that cotton stems can be ensiled with pearl millet fodder in 1:4 ratio with or without urea treatment. Formic acid application further increases the silage quality.