• 소성∙가공
• /
• 제22권1호
• /
• pp.23-29
• /
• 2013

In this study, a micro/nano-random-pattern-structure surface was machined by electric discharge machining (EDM) followed by replicating the EDM surface with a silicone elastomer having low energy and greater hydrophobicity. The variation of hydrophobicity was of prime interest and was examined as a function of the surface roughness of the replicated silicone elastomer. The hydrophobicity was evaluated by the water contact angle (WCA) measured on the relevant surface. For the experiments, the original surfaces were machined by die sinking electric discharge machining (DS-EDM) and wire cutting electric discharge machining (WC-EDM). The ranges of surface roughness were Ra $0.8{\sim}19{\mu}m$ for the DS-EDM and Ra $0.5{\sim}4.7{\mu}m$ for the WC-EDM. In order to fabricate a hydrophobic surface, the EDM surfaces were directly replicated using a liquid-state silicone elastomer, which was thermally cured. The measured WCA on the replicated surfaces for DS-EDM was in the range of $115{\sim}130^{\circ}$ and for WC-EDM the WCA was in the range of $123{\sim}150^{\circ}$. Additionally, the dynamic hydrophobicity was evaluated by measuring an advancing and a receding WCA on the replicated silicone elastomer surfaces.

• 대한치과보철학회지
• /
• 제34권4호
• /
• pp.833-849
• /
• 1996

The material of choice for functional and esthetic reconstruction of maxillofacial defects is silicone. Silicone has appropriate physical properties for maxillofacial prosthesis but it has weak edge strength. Therefore, a proper combination of silicone and polyurethane sheet is recommended to improve this weakness. Various primers are also used to enhance the adhesive strength between silicone and polyurethane sheet. The purpose of this study was to determine the adhesive strength of silicone and polyurethane sheet. Silicone elastomer mixture was made by admixing MDX4-4210 elastomer (40%) and Silastic Medical Adhesive Type A(60%). This silicone elastomer mixture was attached to polyurethane sheet, using one of three different primers(1205, S-2260, or A-304), treated for 1, 2, 4, 6, and 8 hours. These were then polymerized in room temperature, dry-heat oven or microwave oven. Six specimens per each group, a total of 270 specimens were prepared for final test. The differences of T-peel bonding strengths were then determined by a test. The differences of T-peel bonding strengths were then determined by a test method that was recommended by American Society for Testing and Materials C794-80. The results were statistically analyzed using the ANOVA and Mutiple Range Tests(Tukey' HSD). The reults were as follow. 1. Type of primer, primer reaction time, and methods of polymerization showed significant correlation on the T-peel bonding strengths in adhesiveness between silicone and polyurethane sheet. 2. A-304 primer showed statistically higher in T-peel bonding strength than otehr type of primers except for the polymerization in microwave oven with reaction times of 2, 6 hours(p<0.05). 3. No significant differences in T-peel bonding strength were observed among the polymerization methods. 4. The effect of reaction time by the primer type and polymerization method showed statistically significant differences in bonding strength among different reaction times. And in most cases, reaction time of 1 or 2 hours showed higher T-peel bonding strength.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.1137-1141
• /
• 2007

This paper is concerned with the experimental research of magnetorheological elastomers (MREs). The modulus of the MR elastomers can be controlled by an applied magnet field, so that it can be effectively used for vibration suppression applications. The MR elastomer in this experiment is a mixture of KE-1300 silicone, carbonyl iron powder (300mesh) and a silicone hardener (CAT-1300). Three specimens were manufactured and tested by using the vibration testing instruments. The magnetic field was generated by the permanent magnets. The experimental results show that the natural frequencies of the test article with MR elastomer changes by the applied magnetic field. The performance of the MR elastomer can be increased by stronger magnetic fields. This is under investigation.

• Elastomers and Composites
• /
• 제6권2호
• /
• pp.21-24
• /
• 1971

• 고무기술
• /
• 제19권3_4호
• /
• pp.94-102
• /
• 2018

• 한국광학회지
• /
• 제12권6호
• /
• pp.460-462
• /
• 2001

밀봉재를 사용하는 적외선 렌즈 마운트를 분석하고, 3-5$\mu\textrm{m}$에서 작동하는 전방 관측 적외선 열상장비의 대물렌즈인 직경 117mm의 Si 렌즈 마운팅 설계에 적용하였다. 밀봉재료는 Dow Corning 사의 heat cure 타입인 577 primerless Silicone Adhesive(MIL-PRF-23586F)을 이용하였으며, 마운트 재질로는 Al 6061을 사웅하였다. 이론적으로 렌즈와 마운트간의 간격은 -40~+6$0^{\circ}C$의 적용 온도환경에 대하여 250$\mu\textrm{m}$ 이상이 되어야 함을 알 수 있었다.

• Elastomers and Composites
• /
• 제45권2호
• /
• pp.106-111
• /
• 2010

천연고무와 실리콘고무에 자기장응답형 분말을(Magnetic Responsible Powder; MRP) 배합하여 자기장응답형 엘라스토머(Magneto-rheological Elastomer; MRE)를 제조하였다. MRP의 최적 사용량은 30 vol.% 였으며 천연고무 기반 MRE의 기계적 물성은 실리콘고무 기반 MRE 보다 우수했지만, magneto-rheological (MR) 효과는 실리콘고무 기반 MRE가 더욱 우수하였다. MR 효과는 Self-modified Electromagnet Applied Fast Fourier Transform Analyser (SEFFTA)를 사용하여 측정되었는데 천연고무 기반 MRE의 경우는 10%, 실리콘고무 기반 MRE의 경우는 최대 35.7%까지 나타내었다. 네오디뮴 자석을 이용하여 MRE를 경화시키기 전 MRP를 선 배향 시킬 경우 더욱 우수한 MR 효과를 얻을 수 있었으며, MRP의 배향은 주사전자현미경을 이용하여 분석하였다.

• 한국산학기술학회논문지
• /
• 제4권1호
• /
• pp.42-46
• /
• 2003

섬유 코팅제로 널리 쓰이고 있는 액상 PVC는 여러 가지 특성 중 무광택 효과가 뛰어나지만 코팅된 섬유 표면의 유연성이 감소된다. 이런 결함을 대체할 수 코팅 물질로 Elastomer계열의 액상 실리콘 고무를 사용했다. 기존 액상 PVC공정과 동일하게 진행했으며, 로울러의 압축력과 공정상의 예비경화를 이용했다. 실험 결과 액상 PVC로 코팅된 직물의 경도는 70E, 인장강도는 10.3 MPa, 신율은 200%로 측정되었다. 액상 실리콘 고무로 코팅된 직물의 경도는 40도, 인장강도는 5.1 MPa, 신율은 460%,였다. 따라서 액상 실리콘 고무 코팅은 3차 가공 없이 액상 PVC 코팅보다 플라스틱 직물 표면의 무광택성과 유연성을 증가시켰다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.207-208
• /
• 2009

• Elastomers and Composites
• /
• 제51권2호
• /
• pp.113-121
• /
• 2016

Magneto-rheological elastomer (MRE) is a material which shows reversible and various modulus under magnetic field. Comparing to conventional rubber vibration isolator, MREs are able to absorb broader frequency range of vibration. These characteristic phenomena result from the orientation of magnetic particle (i.e., chain-like formation) in rubber matrix. In this study, silicone rubber was used as a matrix of MREs. Carbonyl iron particle (CIP) was used to give magnetic field reactive modulus of MRE. The surface of the CIP was modified with chemical reactants such as silane coupling agent and poly(glycidyl methacrylate), to improve interfacial adhesion between matrix and CIP. The mechanical properties of MREs were measured without the application of magnetic field. The results showed that the tensile strength was decreased while the hardness was increased with the addition of CIP. Also, surface modification of CIP resulted in the improvement of physical properties of MRE, but the degree of orientation of CIP became decreased. The analysis of MR effect was carried out using electromagnetic equipment with various magnetic flux. As the addition of CIP and magnetic flux increased, increment of MR effect was observed. Even though the surface modification of CIP gave positive effect on the mechanical properties of MRE, MR effect was decreased with the surface modification of CIP due to decrease of CIP orientation. Throughout this study, it was found that the loading amounts of CIP affected the mechanical properties of MRE, and surface property of CIP was an important factor on MR effect of MRE.