• Journal of the Korean Society for Marine Environment & Energy
• /
• v.14 no.4
• /
• pp.280-286
• /
• 2011

In this research, the oil detection method and the characteristic of sensor using the selective reaction of silicone rubber in response to hydrocarbon oil will be described. As a sensing principle, the swelling property of silicone rubber in response to hydrocarbon fuel is used, also a strain gauge is used to transduce the volume change to an electrical signal. The sensor core is manufactured with a strain gauge embedded in silicone rubber by the curing process and experiments for characteristics of sensor core with various oils were carried out. It is shown that the sensor core can be used as an oil spill detection sensor. Also, for the application to the sea area, a buoy type sensor platform is integrated with a sensor core and a strain amplifier and it is tested in the simulated oil spill condition. In this study, it is proven that the integrated sensor can be used for the detection of various oils.

• Journal of Navigation and Port Research
• /
• v.28 no.10 s.96
• /
• pp.861-867
• /
• 2004

Generally, a silicone rubber and a chloride polyethylene(CPE) have been used as a binder for high-performance composite EM( Electromagnetic) wave absorbers. In this study, the EM wave absorption abilities for natural lacquer which is newly suggested as a binder were investigated MnZn ferrite composite EM wave absorbers mixed with the natural lacquer were prepared and their absorption ability was also investigated. The prepared MnZn ferrite composite EM wave absorbers mixed with natural lacquer showed an improved EM wave absorption characteristics compared with MnZn ferrite EM wave absorbers mixed with the conventional binders. such as a silicone rubber and a chloride polyethylene(CPE). The matching frequency and the absorption ability of EM wave absorbers varied with the thickness of them.

• Polymer(Korea)
• /
• v.35 no.4
• /
• pp.342-349
• /
• 2011

The effect of the amount of vinyltriethoxysilane (VTEOS) in precipitated silica filled silicone rubbers was extensively investigated in terms of the change of mechanical properties, heat resistance, oil resistance, compression set, resilience, and curing characteristics. As the content of VTEOS increased from 0 to 2.0 phr, the hardness of the silicone rubber increased, however, tensile strength, elongation at break, and tear strength decreased. From heat resistance test, the change of mechanical properties was pronounced for silicone rubber treated with more VTOES. The best heat resistance was achieved at 2.0 phr VTOES. In addition, oil resistance was proportionally improved with VTEOS content. From oil resistance test. it was found that the decrease in hardness and maximum elongation was reduced for VTEOS-added systems. Finally, resilience, compression set, degree of cure and crosslink density were significantly enhanced with the amount of VTEOS.

• Elastomers and Composites
• /
• v.51 no.4
• /
• pp.269-274
• /
• 2016

Two different reactive silicone oligomers, hydroxylpropyl terminated PDMS (PDMS-L) and 1-(2,3-dihydroxy-propoxy)propyl terminated PDMS (PDMS-B), were synthesized through hydrosilylation reaction under Karstedt's catalyst. Using the reactive silicone oligomers, two different silicone-modified gel-coat series were prepared to investigate their thermal and mechanical properties as well as surface characteristics according to reactive silicone oligomer contents. In case of thermal stabilities and mechanical properties, the gel-coat series containing PDMS-B showed higher values than that of the gel-coat series containing the PDMS-L. The contact angle for the gel-coat containing both silicone oligomers/was increased with reactive silicone oligomer contents but there was similar surface tension between PDMS-L and PDMS-B.

• Textile Coloration and Finishing
• /
• v.31 no.2
• /
• pp.107-117
• /
• 2019

In case of pure rubber materials, the initial quality of the rubber materials would be excellent, however, the durability against external impact might be poor. In order to overcome the relatively low durability, textile cord could be employed with silicone rubber. We have studied the improvement of heat-resistant adhesion properties of silicone adhesives between silicone rubber and PET fibers by applying various conditions including dip solution recipe. The silicone rubber used was a platinum catalyst curing type and platinum catalyst type silicone adhesive was used as an adhesive to obtain an optimum adhesive force. Furthermore, the bonding mechanism between silicone and PET fiber was established.

• Elastomers and Composites
• /
• v.28 no.3
• /
• pp.198-204
• /
• 1993

The dielectric properties of silicone rubbers are very important to investigate the polymer structure. The characteristics of the dielectric absorption in silicone rubbers were studied in the frequency range of 30Hz to $1{\times}10^6Hz$ at the temperature range of $30^{\circ}C$ through $170^{\circ}C$. As the results of the study, dielectric constant, tangent 5 were measured $2.8{\times}4.5,\;0.007{\times}0.08$.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.6
• /
• pp.462-468
• /
• 1999

Room temperature vulcanizing (RTV) silicone rubber has been widely used to coat porcelain insulators to render water repellency to prevent formation of water film on the surface and thus to suppress the leakage current and consequently flashover. However, the electrical property and the hydrophobicity of RTV silicone rubber coating under outdoor condition may be influenced by many environmental factors. In this studyvarious treatments, such as salt-fog, salt water immerging and UV irradiation were applied to the samples to investigate the change of the electrical property and hydrophobicity. As a result the leakage current increased and contact angle decreased asthe degradation time is longer. But the degraded RTV silicone rubber has recovered its hydrophobicity during the drying time in ambient condition because LMW(Low Molecular Weight) silicone fluid diffused from the bulk to the surface.

• Applied Chemistry for Engineering
• /
• v.7 no.4
• /
• pp.633-638
• /
• 1996

The phenyl modified silicone polymer, 1,1-diphenyl-1-methyl-7-hydroxydodecamethylheptasiloxysilane, was synthesized to prepare the silicone polymer with good cold-proof and heart-proof properties. From the TGA analysis in the range of $100{\sim}800^{\circ}C$, the phenyl modified silicone polymer had good thermal properties than polydimethylsiloxane. And furthermore fluidity was maintained even below $0^{\circ}C$. Also, the silicone rubber blended with the phenyl modified silicone polymer had better mechanical properties than the silicone rubber.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.12 no.1
• /
• pp.1-10
• /
• 1999

In this paper, we have investigated the effects of the environmental factors on Low Molecular Weight (LMW) silicone fluid contents existing in high temperature vulcanized (HTV) silicone rubber sample, using dipping method and contact angle, current measurement. Artificial treatments such as immersion in water, elevated temperature, UV irradiation and dry band arcing under salt-fog condition are selected as the environmental factors. This results will be helpful to investigate the degradation with time and to expect a life time, because the LMW silicone content, which is important to recovery the hydrophobicity of silicone rubber surface, show different results by each environmental factors.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.254-255
• /
• 2005

In this work, the effects of plasma treatment on surface properties of semi conductive silicone rubber were investigated in terms of X-ray photoelectron spectroscopy(XPS). The adhesion characteristics of semiconductive-insulating interface layer of silicone rubber were studied by measuring the T-peel strengths. As a result, semiconductive silicone rubber surfaces treated with plasma discharge led to and increase in oxygen-containing functional groups, resulting in improving the degree of adhesion of the semiconductive-insulating interface layer of silicone rubber. these results are probably due to the modifications of surface functional groups or polar component of surface free energy of the semi conductive silicone rubber.