• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.1080-1081
• /
• 2015

CPV system in the desert areas or areas near the equator, as is suitable for high-temperature region. As compared to silicon solar cells, CPV system have a high proportion of a BOS (balance of system). Solar cells because of its low proportion when designing a module technology is applied in a variety of ways. Applied to the CPV system is classified into two kinds of optical technology. One of those using fresnel lens uses refraction of light energy. The other is a mirror reflection of the structure using sprays. Both of these two ways to condense the sun to collect solar cell is a form of light. And goals by using a small solar cell materials is to produce more energy. This research proposes rational design approach to calculate proper system capacity in consideration of the aforementioned factors in CPV system.

• Korean Chemical Engineering Research
• /
• 제47권3호
• /
• pp.316-320
• /
• 2009

폴리카보네이트(polycarbonate)는 가볍고, 내충격성 및 가공성이 우수하여 광학기기의 렌즈 및 각종 건축물의 투명 소재 등에 유리의 대체품으로서 널리 이용되고 있으나 낮은 표면경도를 가지고 있어 유통 또는 사용시의 접촉으로 인하여 제품에 손상을 줄 염려가 있다. 따라서 본 연구에서는 폴리카보네이트 필름에 아크릴레이트 올리고머, 모노머, 용매, 염료, 실리콘 아크릴레이트, 그리고 광개시제 등을 다양한 함량비율에 따라 혼합한 코팅용액을 제조하고, 구성 성분의 비율에 따른 폴리카보네이트 필름의 표면 경도, 접착력, 그리고 투과율의 변화를 실험하였다. 그 결과 최대 연필 경도가 2H이고, 접착력과 가시광선 투과율이 우수한 코팅용액의 조성을 얻었다. 색상코팅 실험 결과, 기존 산화물 증착에 의해 구현하던 색상을 본 실험에서 제조한 코팅 용액을 사용하여 거의 대부분 구현할 수 있었으며, 이를 바탕으로 색상 윈도우 렌즈를 제작한 결과, 매우 깨끗하고 균일한 색상과 표면을 가졌다.

• 한국생산제조학회지
• /
• 제23권6호
• /
• pp.547-554
• /
• 2014

CVD SiC is a perfect material used for molds/dies in hot press molding of glass lens. In its fabrication process, nano-precision polishing is essential finally. For this purpose, a novel polishing method using MCF (Magnetic Compound Fluid) slurry is proposed. In this method, MCF slurry is supplied into a given gap between the workpiece and a MCF slurry carrier, and constrained within the polishing zone by magnetic forces from permanent magnet. In this paper, after an experimental rig used to actually realize the proposed method has been constructed, the fundamental polishing characteristics of CVD SiC such as the effects of process parameters including MCF slurry composition on work-surface roughness were experimentally investigated. As a result, nano-precision surface finish of CVD SiC was successfully attained with MCF slurry and the optimum process parameters for obtaining the smoothest work-surface were determined.

• Design & Manufacturing
• /
• 제17권2호
• /
• pp.15-21
• /
• 2023

In this study, a diamond turning machine and a laser-assisted machining module were utilized for the complex combined cutting of aspheric shapes and fine patterns on the surface of high-hardness brittle material, silicon. The analysis of material's form accuracy and corrective machining was conducted based on key factors such as laser output, rotational speed, feed rate, and cutting depth to achieve form accuracy below 1 ㎛ and surface roughness below 0.1 ㎛. The cutting condition and corrective machining methods were investigated to achieve the desired form accuracy and surface roughness. The rotational speed of the spindle and the linear feed rate of the diamond turning machine were varied in five stages for the cutting condition test. Surface roughness and form accuracy were measured using both a contact surface profilometer and a non-contact surface profilometer. The experimental results revealed a tendency of improved surface roughness with increased rotational speed of the workpiece, and the best surface roughness and form accuracy were observed at a feed rate of 5 mm/min. Furthermore, based on the cutting condition experiments, corrective machining was performed. The experimental results demonstrated an improvement in form accuracy from 0.94 ㎛ to 0.31 ㎛ and a significant reduction in the average value of the surface roughness curve from 0.234 ㎛ to 0.061 ㎛. This research serves as a foundation for future studies focusing on the machinability in relation to laser output parameters.

• 한국안광학회지
• /
• 제8권2호
• /
• pp.129-134
• /
• 2003

불포화 비닐 유도체의 다양한 반응성은 자유 라디칼의 사슬 중합반응을 거쳐 유도되어질 수 있으며, 열역학적으로 실행 가능한 고분자 중합을 수행할 수 있는 능력은 주어진 반응조건 항서 반응을 진행시킬 수 있는 적당한 속도에 의존한다. 따라서 반응이 일어날 수 있는 속도조건을 만들기 위해 중합 개시제와 촉진제가 주로 사용되고 있다. 빛의 흡수도는 Methyl Methacrylate(MMA)를 포함한 단지 몇 종류의 불포화 비닐 단량체들만이 가장 편리한 250nm~500nm 파장범위의 빛을 흡수할 수 있다고 알려져 있다. 또한 광학적, 전기적으로 독특한 성질을 가진 polysilanes은 세라믹의 전구물질, UV 광전저항, 광전도체 등으로 널리 사용되어 왔으며, hydrosilation 반응은 실리콘을 포함한 여러 가지 흥미로운 고분자를 만드는데 사용되고 있다 본 연구는 콘텍트렌즈 재료로 사용되는 고분자를 광 화학적 개시제의 작용을 통하여 공중합체와 단일 중합체로 합성하여 그 수율을 분석하였다. 그 결과 이러한 개시제들은 비닐 유도체들의 중하반응에서 경쟁적으로 또는 동시에 사슬 개시와 사슬 전이제로서 작용하고 있음을 보여 주었다.

• International Journal of Computer Science & Network Security
• /
• 제24권6호
• /
• pp.200-206
• /
• 2024

Laser induced breakdown spectroscopy (LIBS) technique has been used for the elemental composition of the soils. In this technique, a high energy laser pulse is focused on a sample to produce plasma. From the spectroscopic analysis of such plasma plume, we have determined the different elements present in the soil. This technique is effective and rapid for the qualitative and quantitative analysis of all type of samples. In this work a Q-switched Nd: YAG laser operating with its fundamental mode (1064 nm laser wavelength), 5 nanosecond pulse width, and 10 Hz repetition rate was focused on soil samples using 10 cm quartz lens. The emission spectra of soil consist of Iron (Fe), Calcium (Ca), Titanium (Ti), Silicon (Si), Aluminum (Al), Magnesium (Mg), Manganese (Mn), Potassium (K), Nickel (Ni), Chromium (Cr), Copper (Cu), Mercury (Hg), Barium (Ba), Vanadium (V), Lead (Pb), Nitrogen (N), Scandium (Sc), Hydrogen (H), Strontium (Sr), and Lithium (Li) with different finger-prints of the transition lines. The maximum intensity of the transition lines was observed close to the surface of the sample and it was decreased along the axial direction of the plasma expansion due to the thermalization and the recombination process. We have also determined the plasma parameters such as electron temperature and the electron number density of the plasma using Boltzmann's plot method as well as the Stark broadening of the transition lines respectively. The electron temperature is estimated at 14611 °K, whereas the electron number density i.e. 4.1 × 10¹⁶ cm^-3 lies close to the surface.