• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.260-260
• /
• 2010

In recent years, polymer/clay nanocomposites have generated a great interest, both in industry and in academia, because they often exhibit remarkable improvement in material properties when compared with the virgin polymer or conventional micro and macro-composites. Among these properties are stiffness, strength, dimensional stability and permeability. [1-3] The dispersion of hydrophilic silicates in a hydrophobic matrix like Polyethylene (PE) is difficult because of the difference in character between PE and Montmorillonite (MMT). Therefore, it is necessary to modify PE with polar groups, which can increase the hydrophilicity of PE. In this study, High density polyethylene (HDPE)/$Mg(OH)_2$/Montmorillonite (MMT) nanocomposites having a various compositions were prepared by a melt blending technique with an internal mixer and properties namely mechanical, morpology, rheological and thermal properties were investigated

• Macromolecular Research
• /
• v.17 no.2
• /
• pp.121-127
• /
• 2009

The cure kinetics of the epoxy-layered, silicate nanocomposites were studied by differential scanning calorimetry under isothermal and dynamic conditions. The materials used in this study were o-cresol novolac epoxy resin and phenol novolac hardener, with organically modified layered silicates. Various kinetic parameters, including the reaction order, activation energy, and kinetic rate constants, were investigated, and the storage stability of the epoxy-layered silicate nanocomposites was measured. To synthesize the epoxy-layered silicate nanocomposites, the phenolic hardener underwent pre-intercalation by layered silicate. From the cure kinetics analyses, the organically modified layered silicate decreased the activation energy during cure reaction in the epoxy/phenolic hardener system. In addition, the storage stability of the nanocomposite with the pre-intercalated phenolic hardener was significantly increased compared to that of the nanocomposite with direct mixing of epoxy, phenolic hardener, and layered silicate. This was due to the protective effect of the reaction between onium ions and epoxide groups.

• Journal of the Korean Ceramic Society
• /
• v.44 no.11
• /
• pp.597-606
• /
• 2007

With the advent of ubiquitous age, the high quality dielectric materials have been required for the wireless communications available to the millimeterwave as well as microwave frequencies. The utilizable region for the frequency has been expanding to the millimeter-wave region because of the shortage of radio frequency (RF) resources. These high frequencies would be expected for ultra high speed LAN, ETS and car anti-collision system on the intelligent transport system (ITS) and so on. Silicates are good candidates for microwave/millimeterwave dielectrics, because of their low dielectric constant ${\epsilon}_r$ and high quality factor (High Q). Forsterite ($Mg_2SiO_4$) is one of the silicates with low ${\epsilon}_r$ of 6.8 and Q f of 240000 GHz. In this paper, we reviewed following three categories for synthesis of forsterite: (1) Synthesis of high Q forsterite (2) Adjust the temperature coefficient of resonant frequency $TC_f$ (3) Diffusion of $SiO_{4^-}$ and Mg-ions on the formation of forsterite.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.5
• /
• pp.9-15
• /
• 2010

Recently, the high-compressive strength concrete where the use is extending was weak in fire because of spalling that was occurring with rise of internal vapor pressure by high temperature. For preventing spalling of high-strength concrete in fire, Organic fibers have been using in concrete generally. By melting of organic fibers in concrete in fire, the internal moistures of concrete moves quickly to the outside, and so, preventing of spalling of high-strength concrete. But this method will be able to prevent the spalling of high-strength concrete, but makes the decrease of the concrete strength after fire. This study make a comparison between properties of preventing of spalling and remaining compressive strength of concrete using intumescence Alkali-Silicates fire-resistant material and that of concrete with organic fibers. Using organic fibers for preventing of spalling of concrete are P.P and Nylon fibers, and anti-fire intumescence material for protection of concrete surface is alkali-silicate materials. Fire resistance test executed as long as 3 hr under the flame temperature $1,200^{\circ}C$ over. In the case of concrete with P.P fibers, don't occurred the spalling, but the remaining compressive strength will not be able to measure, the concrete using intumescence Alkali-Silicates system fire-resistant material is not only preventing of the spalling but also the remaining compressive strength maintained until the maximum 96%.

• Korean Journal of Soil Science and Fertilizer
• /
• v.16 no.4
• /
• pp.333-342
• /
• 1983

A pot experiment was conducted to find out the effect of application amounts of silicates on the fatty acid and sterol composition of paddy rice at various growing stages. The results obtained were as follows; 1. At maximum tillering stage and heading stage, significant positive correlations were obtained between the ratio of unsaturated fatty acid to saturated fatty acid and silica absorption, dry matter or grain yield, respectively. But significant correlation was not observed between them at harvesting time. 2. At maximum tillering stage and heading stage, the ratio of unsaturated fatty acid to saturated fatty acid in paddy rice was increased with increasing silica application from 80 to 180 ppm of soil, but these ratio was decreased at the plot of 200Kg/10a of silicate. 3. The ratio of sitosterol to stigmasterol in paddy rice at maximum tillering stage was increased with increasing silica application of soil, but these ratio was increased with increasing silica application up to 180 ppm of soil at heading stage, and was decreased at the plot of 200Kg/10a (410 ppm in soil) application of silicates.

• Elastomers and Composites
• /
• v.45 no.2
• /
• pp.112-121
• /
• 2010

In this study, styrene butadiene rubber(SBR)/organoclay nanocomposites were manufactured using the latex method with 3-aminopropyltriethoxysilane(APTES) as a modifier. The X-ray diffraction(XRD), transmission electron microscopy(TEM) images, Fourier transform infrared(FTIR) spectroscopy, swelling ratio and mechanical properties were measured in order to study the interaction between filler and rubber according to the mixing temperature in the internal mixer. In the case of SBR/APTES-MMT compounds, the dispersion of the silicates within the rubber matrix was enhanced, and thereby, the mechanical properties were improved. The characteristic bands of Si-O-C in APTES disappeared after hydrolysis reaction in the MMT-suspension solution and the peak of hydroxyl group was increased. Therefore the formation of chemical bonds between the hydroxyl group generated from APTES on the silicate surface and the ethoxy group of bis(triethoxysilylpropyl) tetrasulfide(TESPT) was possible. Consequently, the 300% modulus of SBR/APTES-MMT compounds was further improved in the case of using TESPT as a coupling agent. However, the silanization reaction between APTES and TESPT was not affected significantly according to the increase of mixing temperature in the internal mixer.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.521-522
• /
• 2009

This study is concerned with elevating the penetration depth after carbonation and porosity change of concrete structures by applying alkali silicate hydrophilic impregnants including lithium and potassium silicates.

• Journal of the Korean Ceramic Society
• /
• v.24 no.2
• /
• pp.133-138
• /
• 1987

The behavior of CaO and SiO2 in the reaction produced which produced in the early hydration of C3S was studied by XRD and thermal analyzer. Polymerization of hydrated siltcates was also studied by TMS method. TMS derivatives were separated by gaschromatography. Cao/SiO2 molar ratios of the produced CSH gel under the air atmosphere were higher than that in the CO2. Dimerization rate of hydrated silicates was very fast in the early hydration stage. Trimer began to appear later than dimer and its increasing rate was very low. The amount of dimer and trimer formed under the CO2 atmosphere was less than that in the air.

• Journal of the Korean Ceramic Society
• /
• v.13 no.4
• /
• pp.15-19
• /
• 1976

Mutual interferences of alkali and alkali-earth metals in atomic absorption were examined. For determination of Na or K interfering elements increase the absorbancy, and for Ca or Mg decrease. Since influences of coexisting elements become nearly constant by addition of large amount of same coexisting element, could be use mixed standard solution for alkali or alkali-earth metal determination in the presence of other alkali and alkali-earth metals. The metals can be readily incorporated into scheme of rapid silicate analysis. Precision and accuracy are good.

• Publications of The Korean Astronomical Society
• /
• v.30 no.2
• /
• pp.155-158
• /
• 2015

The traditional view of dust in the interstellar medium is that it is made of graphite and silicates. In this paper, we discuss the evidence for complex organics being a major component of interstellar dust. Comparison between astronomical infrared spectra and laboratory spectra of amorphous carbonaceous materials suggests that organics of mixed aromatic-aliphatic structures are widely present in circumstellar, interstellar, and galactic environments. Scenarios for the synthesis of these compounds in the late stages of stellar evolution are presented.