• 청정기술
• /
• 제27권2호
• /
• pp.115-123
• /
• 2021

본 연구는 무기 실리카 껍질(shell)과 유기 고분자 코어(core)로 구성된 매우 균일한 유-무기 복합체 입자 제조의 방법에 관한 것이다. 먼저, 미세유체 기술을 이용하여 균일한 크기를 지니는 유기 고분자 코어 입자를 제조하였다. 코어 입자의 제조 과정에서 코어 입자의 제조 과정에서 광 경화성 유기 물질이 포함된 분산상과 연속상의 유속을 독립적으로 제어함으로써 균일한 액적을 형성하였다. 액적이 형성됨과 동시에, 미세유체 채널의 말단에서 자외선 조사에 의해 액적이 광중합 되어 코어 입자로 형성된다. 더불어, 폴리알릴아민 하이드로클로라이드(polyallylamine hydrochloride, PAH)와 인산 이온(phosphate ion)으로 구성된 나노 복합체는 최적화된 pH 조건에서 수소결합과 정전기적 인력 같은 강력한 상호작용을 통해 코어 입자에 코팅된다. 폴리아민 나노 복합체에 존재하는 PAH 주쇄의 아민 그룹들은 규산(silicic acid)의 축합(condensation) 반응을 촉매하여, 코어 입자 표면의 실리카 나노입자 성장을 시킬 수 있었다. 따라서, 본 방법을 통해 유기 코어에 무기 실리카 나노입자로 코팅된 유-무기 복합체 입자를 제조할 수 있었다. 최종적으로, 본 연구에서 제시한 방법은 보다 온화하며 환경친화적인 조건 하에서 단시간 내에 유-무기 복합체 입자를 합성할 수 있으며, 다양한 모양과 크기를 갖는 코어 입자에 적용되어 넓게 활용될 수 있다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.705-710
• /
• 2001

So for the quartz-glassy crucible wastes which was used for pulling up silicon-single-crystal ingot have simply reused for refractory raw-materials, or exhausted. This study is concerned on the advanced recycling-technology that is obtained by the proper micro-particle preparation process in order to fabricate fine amorphous silica filler for EMC (Epoxy Molding Compound). Therefore, this paper will deal with the physical, chemical and thermal pre-treatment process for efficient impurity removal and with the proper micro-particle process for producing the amorphous silicafiller. In view of the results, if the chemical, physical and thermal pre-treatment process for efficient elimination of impurity was passed, the purity of wasted fused glassy crucible is almost equal to the its of first anhydrous quartz glass. Thus, it was understood that this wasted fused glassy crucible was sufficient value of recycling, though it was damaged. When the ingot was fabricated, Phase transformation of crystallization by heat treatment (heat hysteresis phenomenon) was not changed. So, it was understood that as fused silica in the amorphous state, as It is, recycling possibility was very high

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2009년도 추계 학술논문 발표대회
• /
• pp.121-125
• /
• 2009

The recycling of waste concrete is increasing for the environment protection and the shortage of aggregate according to the large scale construction project in Korea. The more manufacturing high quality recycled aggregate is produced, the more waste concrete powder generated from the manufacture process of recycled aggregate, and the consideration about the recycling of waste concrete powder is need. Waste concrete powder was used for the partial replacement of silica powder, which is a main raw material for the manufacture of autoclave foamed concrete. According to the results of research, the slurry density, flow, compressive strength mainly depend on the replacement ratio of particle size and waste concrete powder. At the SEM analysis, the more high-waste concrete powder was the less there are generated tobermorite. But we conclude that it is possible to replace WCP as silica source in the manufacture of the lightweight foamed concrete.

• 한국결정성장학회지
• /
• 제10권4호
• /
• pp.309-317
• /
• 2000

Langasite is a promising new piezoelectric material for SAW filter application. Little was known until recently about the methods needed to mechanically polish and chemically polish/etch this material. In this experiment, polishing, slurry chemistry and chemical wet etching for langasite is described. Conventional quartz and LN ($LiNbO_3$) polishing methods did not produce satisfactory polished surfaces, and polishing with a colloidal silica slurries has shown to be most effective. The optimum condition was investigated by changing the slurry chemistry. As the planarization effect is very important in SAW filter applications, the examination of the effective particle number effect and the particle size effect was carried out. Z-cut langasite surface which had been polished with the colloidal silica slurries was etched in a variety of etchants. Conventional quartz etchants destroyed the polished surface. Other etchants formed a thin film on the surfaces. In this experiment, the reaction between langasite and a few etching solution was analysed. And an appropriate selective etchant solution for analyzing the defects was synthesized.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 센서 박막재료 반도체 세라믹
• /
• pp.37-40
• /
• 2003

As the integrated circuit device shrinks to the smaller dimension, the chemical mechanical polishing (CMP) process was required for the global planarization of inter-metal dielectric (IMD) layer with free-defect. However, as the IMD layer gets thinner, micro-scratches are becoming as major defects. Micro-scratches are generated by agglomerated slurry, solidified and attached slurry in pipe line of slurry supply system. It is well known that the presence of hard and larger size particles in the CMP slurries increases the defect density and surface roughness of the polished wafers. In this paper, we have studied aging effect the of CMP slurry as a function of particle size. We prepared and compared the self-developed silica slurry by adding of abrasives before and after annealing. As our preliminary experiment results, we could be obtained the relatively stable slurry characteristics comparable to original silica slurry in the slurry aging effect.

• 멤브레인
• /
• 제20권2호
• /
• pp.87-96
• /
• 2010

세공 크기가 2.6 ${\mu}m$인 SPG (Shirasu porous glass) 막이 설치된 실험실 규모의 막유화 장치를 사용하여 막유화 에멀젼-겔 공정의 변수 조절을 통해 구형상의 실리카 입자를 제조하였다. 막유화 에멀젼-겔 공정의 변수로는 분산상 압력, 연속상 내 안정제 및 유화제의 농도, $H_2O$/TEOS 비율 및 연속상에 대한 분산상의 비율로 설정하고, 이들 변수가 제조된 실리카 입자의 크기와 분포에 미치는 영향을 검토하였다. 막유화의 공정변수들 중에서 분산상 압력과 연속상에 대한 분산상의 비가 증가할수록 실리카 입자의 크기가 증가하였다. 반면 안정제 및 유화제의 농도, $H_2O$/TEOS 비가 증가할수록 입자의 크기가 감소하였다. 막유화 에멀젼-겔 공정변수의 조절을 통해 최종적으로 평균 입자 크기가 3 ${\mu}m$인 비교적 입도분포가 균일한 구형상의 실리카 입자 제조가 가능하였다.

• 공업화학
• /
• 제29권4호
• /
• pp.425-431
• /
• 2018

UV 및 블루라이트를 차단하는 세륨 옥사이드 나노 입자와 다공성 실리카와의 복합입자를 건식 코팅 공정을 통해 제조하였다. 실리카와 세륨 옥사이드 간 혼합 비율과 메카노 퓨전 장치의 챔버 회전속도 등의 제조 조건을 달리하여 여러 복합입자를 만든 후, 입자 표면 형태를 SEM으로 관측 비교하고 XRF을 통해 복합입자의 조성을 분석하였다. 세륨 옥사이드를 실리카와 함께 복합입자로 만들어 물에 분산시키면 현탁 용액의 투명도가 높아지고 분산 안정성이 향상되었다. 또한 파우더의 유동성과 발림성이 개선되었다. 본 연구를 통해 세륨 옥사이드/실리카 복합입자가 자외선 및 블루라이트를 차단하는 기능성 화장품 소재로 사용 가능함을 확인하였다.

• 펄프종이기술
• /
• 제37권2호
• /
• pp.38-46
• /
• 2005

Experimental work was carried out in order to produce a novel grade of ink-jet paper that has both high print-out quality and price competitiveness. Usually, silica and PVOH has been used for ink-jet paper to design the coating layer that has a hydrophilic and micro-porous structure. However, poor rheological characteristics and low productivity of the silica-PVOH system make the price of the ink-jet paper high. The main focus of this study was replacing the conventional silica (coating pigment) PVOH (binder) coating system with the new PCC (coating pigment) cationic starch (binder) coating system, and optimizing thecoating technology associated with PPC-cationic starch system. In this study, ink-jet print quality of PCC-coated papers was compared with that of silica-coated paper. Two types of PCC were used: conventional type and colloid type. It turned out that PCC C, a conventional coating pigment, has not given a desirable result: it showed high dot reproduction, but it gave low optical density. In spite of low dot reproduction, the qualities of PCC A were comparable or superior to those of silica in optical density, color reproduction, and the uniformity of printing surface. It was also shown that the problems that are happened when the dosage level of cationic starch was too low were varied with ink-type used in each printer. However, in the case of low binder level, the produced image was widely spread resulting fromtoo low optical density of images, or from the lack of bonding ability to set ink into coating surface.

• 자원리싸이클링
• /
• 제16권5호
• /
• pp.41-45
• /
• 2007

폐실리콘 슬러지로부터 테트라메틸오쏘실리케이트(TMOS)와 실리카 나노분말을 제조하였다. 먼저, 실리카 나노분말의 전구체인 TMOS를 폐실리콘 슬러지로부터 촉매 화학반응에 의해 합성하였다. TMOS의 합성실험에서 반응온도가 $130^{\circ}C$ 이상에서는 반응시간이 5시간 경과 시 반응온도에 무관하게 100%의 반응율을 나타내었다. 그러나 $150^{\circ}C$ 이상에서는 초기 반응속도가 빨라졌다. 메탄올 주입속도를 0.8 ml/min에서 1.4 ml/min로 증가시에는 3시간 경과 후에는 반응율이 변화하지 않았다. 이와 같이 합성된 TMOS로부터 화염분무열분해법에 의해 실리카 나노분말을 제조하였다. 제조된 실리카 나노분말은 구형이며, 무응집 형태이었다. 평균입자 크기는 전구체의 주입속도 및 농도변화에 따라 9 nm에서 30 nm로 변화하였다.

• The Korean Journal of Physiology
• /
• 제30권1호
• /
• pp.77-83
• /
• 1996

Platelet-activating factor(PAF) is a phospholipid mediator of pulmonary inflammation, and immunologic reaction. In this study, the role of PAF on tumor necrosis factor$(TNF_{-{\alpha}})$ production by rat alveolar macrophages(AM) was examined. When PAF $(10^{-12}{\sim}10{-16}\;M)$ alone was added to AM culture, $(TNF_{-{\alpha}})$ production was not significantly increased above the resting level. In contrast, the combined addition of PAF $(10^{-6}\;M)$ and muramyl dipeptide(MDP) $(1.0\;{\mu}g\ml)$ to AM cultures markedly enhanced $(TNF_{-{\alpha}})$ production with 8.2 fold increase compared with AM culture in resting state. This potentiative effect was 313% above the sum of the separate effects of PAF and MDP. To characterize MDP effects on $(TNF_{-{\alpha}})$ production, the dose-response of AM cultured with various concentrations of MDP was tested. High level of MDP $(10\;{\mu}g\ml)$ could not significantly enhance the potentiation effect on $(TNF_{-{\alpha}})$ production compared with AM cultures with low level of MDP $(0.1\;{\mu}g\ml)$, i.e. 112.5% vs 107.8%, respectively when $10^{-10}$ M of PAF was simultaneously added to the cell culture. These data support that the potentiation of TNF. g production in AM culture is mediated by PAF rather than MDf It was also evaluated whether the similar result was obtained in silica, respirable toxic particle-treated AM culture. $(TNF_{-{\alpha}})$ production was also significantly enhanced in the PAF $(10^{-6}\;M)$ and silica $(50\;{\mu}g\ml)$-added cell cultures with 4.7 fold above the value of silica alone-stimulated cells. These results indicate that PAF can potentiate $(TNF_{-{\alpha}})$ production by MDP-or silica- stimulated AM and suggest that PAF may play a potent role in lung inflammation and disease associated with microbe and occupational dust exposures.