• 한국응용과학기술학회지
• /
• 제34권4호
• /
• pp.954-961
• /
• 2017

재조합 ${\beta}$-galactosidase (${\beta}$-gal)을 이용하여 transgalactosylation 반응으로 합성된 2-phenoxyethanol galactoside (PE-gal)과 chlorphenesin galactoside (CPN-gal)의 정제를 실시하였다. 먼저 PE와 PE-gal이 포함된 반응물에 ethyl acetate (EA)를 넣고, EA/water 이상계 시스템에서 PE와 PE-gal을 분획하였다. 이 시스템에서 PE는 EA층으로 PE-gal은 water층으로 분획되었다. 그리고, 물층을 모아서 silica gel chromatography를 실시하였다. 최종적으로, silica gel chromatography만 실시하여 PE-gal을 정제한 경우와, EA 처리 후 silica gel chromatography를 실시하여 PE-gal을 정제한 경우의 정제 PE-gal에 대하여 HPLC (High performance liquid chromatography)와 TLC (thin-layer chromatography) 분석을 수행하였다. 그 결과 EA를 처리하여 분획한 후, silica gel chromatography를 수행한 시료에서 잔여 PE가 완전히 제거되는 것을 관찰하였고, silica gel chromatography만 실시하여 PE-gal을 정제한 경우에는 상당량의 잔여 PE가 관찰되었다. 이 때, mole 기준으로 약 21%의 정제 수율을 확인할 수 있었다. 마찬가지로 CPN-gal의 정제에서도 EA 분획 처리 후, silica gel chromatography를 수행하였더니, 잔여 CPN이 거의 없는 순수한 CPN-gal을 얻을 수 있었다.

• 한국재료학회지
• /
• 제25권4호
• /
• pp.209-213
• /
• 2015

Synthesis of nano-silica using water glass in a Sol-Gel process is one of several methods to manufacture nano-silica. In nano-silica synthesized from water glass, there are various metal impurities. However, synthesis of nano-silica using water glass in a Sol-Gel process is an interesting method because it is relatively simple and cheap. In this study, nano-silica was synthesized from water glass; we investigated the effect of pH on the synthesis of nano-silica. The morphology of the nanosilica with pH 2 was flat, but the surface of the nano-silica with pH 10 had holes similar to small craters. As a result of ICP-OES analysis, the amount of Na in the nano-silica with pH 2 was found to be 170 mg/kg. On the other hand, the amount of Na in the nano-silica with pH 10 was found to be 56,930 mg/kg. After calcination, the crystal structure of the nano-silica with pH 2 was amorphous. The crystal structure of the nano-silica with pH 10 transformed from amorphous to tridymite. This is because elemental Na in the nano-silica had the effect of decreasing the phase transformation temperature.

• Tribology and Lubricants
• /
• 제13권3호
• /
• pp.115-123
• /
• 1997

The electrorheological (ER) behavior of suspensions in silicone oil of silica gel powder (average particle size 49 $\mu$m) absorbed water was investigated at room temperature with electric fields up to 2.4 KV/mm. In this paper, for development of succcessful ER fluids used for wide temperature range later, we would like to know a fundamental understanding of water on ER effect. As a first step, the ER fluids involving water activated silica gel were measured not only the electrical characteristics such as dielectric constant, current density and electrical conductivity but also the rheological properties on the strength of electric field, the quantity of dispersed phase and absorbed water. From the experimental results that water absorbed to the particles directly affects to the surface charge density of electric double layer model proposed by Schwarz and makes dielectric constant and current density of ER fluids increase. The current density and dynamic yield stress $($\tau$_y)$ of water activated silica gel suspensions was in exponential proportion to the strength of electric field, the quantity of dispersed phase and absorbed water. And the optimum water quantity and weight concentration of silica gel for electrorheological effect were 4-5 wt% and 15 wt%, respectively.

• 한국세라믹학회지
• /
• 제24권5호
• /
• pp.437-446
• /
• 1987

In this study the attempts were made to investigate the possibilities of using domestic clay minerals and zeolite, which are available in almost unlimitted quantities, for preparation of aluminum sulfate, white carbon and silica gel. Aluminum sulfate was obtained by the method of sulfuric acid treatment. White carbon and silica gel were prepared by utilizing crystalline silica which was obtained as a by product during preparing the aluminum sulfate. White carbon was obtained by reacting 5.0 weight percent sulfuric acid solution with water glass which was a reaction product of crystalline silica and soldium hydroxide in a autoclave, while silica gel was obtained by reaction 10.0 weight percent acetic acid solution with water glass.

• 한국산학기술학회논문지
• /
• 제14권5호
• /
• pp.2529-2535
• /
• 2013

SPEEK/PWA/silica 전해질 복합막을 제조하기 위하여 졸-겔 방법을 이용하였다. 졸-겔반응의 전구체로는 TEOS를 사용하였으며 첨가제 겸 촉매로는 phosphotungstic acid(PWA)를 사용하였다. FE-SEM 분석을 통하여 PWA 및 silica 나노입자들은 고분자속으로 균일하게 분산되는 것을 확인할 수 있었다. SPEEK/PWA/silica 복합막의 함수율은 TEOS의 비율이 낮은 경우에는 TEOS의 증가에 따라 함수율이 감소하였지만 TEOS의 비율이 높은 경우에는 TEOS의 영향을 적게 받았다. SPEEK/PWA/silica 복합막의 이온전도도는 함수율의 변화와 유사한 경향을 나타내었으며 TEOS의 비율이 증가함에 따라 처음에는 이온전도도가 감소하다가 다시 증가하는 경향을 나타내었다. SPEEK/PWA/silica 복합막의 메탄올 투과도는 TEOS의 농도가 증가함에 따라 투과도가 감소하는 경향을 나타내었다.

• 동력기계공학회지
• /
• 제15권4호
• /
• pp.75-78
• /
• 2011

There are various types of materials used in electronic industry, such as electrode material, conductor, insulator, anode, cathode and semiconductor. Electrode material type is Cu, Ti, ZnO and so on. Especially if we use mixed ZnO in soil cement or silica gel, we can have advantages in ice road to prevent freezing. We have great impact if we use supported in inorganic substances like silica gel. In this paper we have studied that ZnO supported silica gel and its properties. Zinc acetate dissolved in distilled water were loaded on the silica gel by the reaction with ammonia at $80^{\circ}C$. And we investigated particle structures of ZnO by scanning electron microscopy(SEM) and X-ray diffraction(XRD).

• Bulletin of the Korean Chemical Society
• /
• 제30권7호
• /
• pp.1516-1520
• /
• 2009

A sensitive technique for the determination of trace Co(II) in various samples after column preconcentration by adsorbing onto silica gel loaded with 1-nitroso-2-naphthol was developed. Several experimental conditions, such as pH of sample solution, the amount of silica gel loaded with 1-nitroso-2-naphthol, the flow rate for adsorption and so forth, were optimized. The interfering effects of diverse concomitant ions were investigated. Fe(III) interfered with more than any other ions, but the interference by Fe(III) was completely eliminated by adjusting the amount of silica gel loaded with 1-nitroso-2-naphthol to 0.30 g. The dynamic range, the correlation coefficient ($R^2$), and the detection limit obtained by the proposed technique were 3.0-140.0 ng m$L^{-1}$, 0.9942, and 1.81 ng m$L^{-1}$, respectively. For validating the technique, the aqueous samples (tap water, reservoir water, stream water, and wastewater) and the plastic samples were used as real samples. Recovery yields of 93.0-107.0% were obtained. These measured data were not different from ICP-MS data at the 95% confidence level by F test. Based on the results of the experiment, it has been found that the proposed technique can be applied to the determination of Co(II) in various real samples.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제6권2호
• /
• pp.150-155
• /
• 2001

It has been observed that water, which is absolutely essential for enzyme activity, can induce the agglomeration of enzyme particles in organic media. Although enzyme agglomeration is significant in that it usually reduces enzyme activity and stability, little attention has been paid to the quantitative analysis of enzyme agglomeration behavior in nonaqueous biocatalytic systems. In this study, the effect of water and silica gel on enzyme agglomeration were investigated using Candida rugosa lipase and cyclohexane as a model enzyme and an organic medium. The extent of enzyme agglomeration was quantified by sieve analysis of freeze-dried agglomerates. Increasing the water content of the medium increased the size of the enzyme agglomerates, and it was found that water produced during the esterification reaction could also promote the agglomeration of enzyme particles suspended in organic media. On the other hand, the size of the enzyme agglomerates was remarkably reduced in the presence of silica gel at the same water content. We also show that this increase in the size of enzyme agglomerates results in lower reaction rates in organic solvents.

• 한국재료학회지
• /
• 제24권5호
• /
• pp.271-276
• /
• 2014

Silica nano-powder (SNP) is an inorganic material able to provide high-performance in various fields because of its multiple functions. Methods used to synthesize high purity SNP, include crushing silica minerals, vapor reaction of silica chloride, and a sol-gel process using TEOS and sodium silicate solution. The sol-gel process is the cheapest method for synthesis of SNP, and was used in this study. First, we investigated the shape and the size of the silica-powder particles in relation to the variation of HCl and sodium silicate concentrations. After drying, the shape of nano-silica powder differed in relation to variations in the HCl concentration. As the pH of the solution increased, so did the density of crosslinking. Initially, there was NaCl in the SNP. To increase its purity, we adopted a washing process that included centrifugation and filtration. After washing, the last of the NaCl was removed using DI water, leaving only amorphous silica powder. The purity of nano-silica powder synthesized using sodium silicate was over 99.6%.

• 대한기계학회논문집B
• /
• 제31권2호
• /
• pp.116-124
• /
• 2007

An adsorption chiller is expected to have high energy-efficiency in utilizing the waste heat exhausted from a process. The objective of this paper is to investigate the performance of silica gel-water adsorption chiller from the cycle simulation and to provide a guideline for design of the adsorption chiller. The effect of cycle time, inlet temperature and water flow rate on the cooling capacity and COP is quantified during the cycle operation. It is found that the performance of adsorption chiller is more sensitive to the change of inlet water temperature rather than the water flow rate. It is concluded that the COP is 0.57 in the standard conditions(hot water $80^{\circ}C$, cooling water $30^{\circ}C$, chilled water inlet temperatures $14^{\circ}C$ and cycle time 420sec).