• Korean Chemical Engineering Research
• /
• 제48권4호
• /
• pp.428-433
• /
• 2010

Isophorone diisocyanate(IPDI), poly(tetramethylene glycol)(PTMG), dimethylol propionic acid(DMPA), triethylamine(TEA), ethylenediamine(EDA), 3-aminopropyl triethoxysilane(APS)을 출발물질로 하여 수분산 폴리우레탄(Waterborne polyurethane, WPU)이 합성되었다. 이 WPU에 0~8 wt%로 첨가량이 조절된 tetraethylorthosilicate(TEOS)를 첨가한 후 Sol-Gel 반응을 진행시켜 WPU/silica nanocomposite를 제조하였다. WPU/silica nanocomposite의 평균 입경은 TEOS의 첨가량이 증가함에 따라 증가하였다. 또한 제조된 nanocomposite의 열적 안정성은 순수한 WPU보다 우수하였다.

• 한국추진공학회지
• /
• 제16권6호
• /
• pp.23-31
• /
• 2012

본 연구에서는 $SiO_2$ 계열 젤화제로 알려진 Aerosil(R) R972, Silica 230, Silica 530을 사용하여 케로신 기반 젤 연료를 제작하였다. 케로신 계열 연료로는 Jet A-1을 사용하였으며 젤화(gelification) 여부를 확인하기 위한 전단박화(shear thinning) 현상은 멱법칙(power-law) 모델을 이용하여 검증하였고 제작된 모든 젤 연료는 전단박화 효과와 함께 $SiO_2$ 젤화제의 함유량이 증가할수록 젤의 점도가 높게 형성됨을 확인하였다. 본 연구에서 사용된 젤화제 중 Aerosil(R) R972를 첨가한 젤 연료의 점성계수가 전단률 전 영역에 걸쳐 멱법칙 모델을 따르는 것이 확인되었으며 상대적으로 Silica 230과 Silica 530을 첨가한 젤 연료는 전단률 150 [1/s] 근방 이하에서 멱법칙이 유효하지 않음을 알 수 있었다. 또한, 젤화제 함유량이 증가할수록 vortex 혼합법과 수동 혼합법 간의 유변학적 특성이 크게 차이 나는 것이 관찰되었다.

• 대한화학회지
• /
• 제45권6호
• /
• pp.546-548
• /
• 2001

클로로술폰산을 실리카겔과 반응시키면 실리카겔 표면에 황산이 공유결합으로 고정된 실리카황산을 얻게 된다. 무용매 조건하에서 마이크로웨이브를 쪼여주면서 실리카 황산과 젖은 $SiO_2$를 함께 사용하게 되면 아세탈을 화합물로 변화시키는 효과적인 탈아세탈 시약으로 사용할 수 있다.

• The Korean Journal of Ceramics
• /
• 제6권1호
• /
• pp.37-42
• /
• 2000

To reduce shrinkage and the possibility of fracture during ambient pressure drying, it is of great importance to increase the strength and stiffness of the wet gels. In this paper is presented the strengthening and stiffening of wet silica gels prepared from sodium silicate (water glass) as well as properties of the corresponding xerogels. By washing gels containing different initial silica contents in water solutions at elevated pH, a maximum in shear modulus of ~4 MPa was obtained. The maximum stiffness enabled xerogels with bulk density of 0.28g/$\textrm{cm}^3$ to be made regardless of silica content and washing conditions. However, by aging the wet gels in a solution providing fresh monomers to the gel network, a shear modulus of 20 MPa was obtained after 27h. By this method monolithic xerogels with a density down to ~0.2g/$\textrm{cm}^3$ was prepared. The results are compared to alkoxide based gels.

• Korean Membrane Journal
• /
• 제7권1호
• /
• pp.42-50
• /
• 2005

Among ceramic membranes developed to date, amorphous silica membranes are attractive for gas separation at elevated temperatures. Most of the silica membranes can be formed on a porous support by sol-gel or chemical vapor deposition (CVD) process. To improve gas permselectivity of the membrane, well-controlled pores having desired size and chemical affinity between permeates and membrane become important factors in the preparation of membranes. In this article, we review the literature and introduce our technologies on the microstructure to be solved and pore size control of silica membranes using sol-gel and CVD methods.

• Elastomers and Composites
• /
• 제45권1호
• /
• pp.7-11
• /
• 2010

본 논문에서는 polyethyleneimine (PEI)를 커플링제로 사용하여 간단한 공정을 통하여 아세틸렌 블랙/실리카 복합체 입자를 제조하였다. 복합체 입자는 PEI를 아세틸렌 블랙 표면에 흡착시키고 졸-겔 합성공정을 통하여 실리카를 아세틸렌 블랙 위에서 합성하는 두단계 공정을 통하여 제조되었다. 복합체 입자의 모폴로지 분석 결과 실리카가 아세틸렌 블랙위에 존재하는 core-shell 구조를 확인하였으며, 표면에 상당한 미세기공이 존재함을 알 수 있었다.

• 한국세라믹학회지
• /
• 제54권3호
• /
• pp.184-199
• /
• 2017

Silica aerogels are attracting attention due to certain outstanding properties such as low bulk density, low thermal conductivity, high surface area, high porosity, high transparency and flexibility. Due to these extraordinary properties of aerogels, they have become a promising candidate in thermal superinsulation. The silica-based aerogels are brittle in nature, which constrains their large scale-application. It is necessary to achieve transparency and flexibility of silica-based aerogels at the same time and with the same porous structure for optical field applications. Therefore, the present review focuses on the different sol-gel synthesis parameters and precursors in the synthesis of flexible as well as transparent silica aerogels. Also, a brief overview of reported flexible and transparent aerogels with some important properties and applications is provided.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1993년도 춘계학술발표회
• /
• pp.41-42
• /
• 1993

• 한국전기전자재료학회논문지
• /
• 제17권9호
• /
• pp.967-972
• /
• 2004

Hardness and surface property of coated gel materials are considerably different according to kinds(particle size/stabilized ion) of colloidal silica(CS), kinds of silanes, content ratio of silane versus CS, and reaction degree in sol solution. We report the properties of sol-gel coating materials in which the factors of reaction are kinds of CS, contents ratio of CS and MTMS, and reaction time of sol. The contact angles of the coated films obtained from the mixed CS system showed a little good relationship with MTMS content increase to those from HSA CS reaction system and the change of contact angle didn't have much effect on reaction time of sol. In the coating films obtained from HSA CS reaction system, the surface was much rough in case of that the content MTMS decreased and the reaction of sol kept long. The surface roughness of films obtained from the mixed CS reaction system showed similar tendency, though its degree was a little different. In synthesis of sol-gel coating materials, we could identify that choice of CS kinds and content ratio of CS and silane were important and it was desirable the reaction time of sol is not long.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1997년도 Proceedings of the 13th KACG Technical Meeting `97 Industrial Crystallization Symposium(ICS)-Doosan Resort, Chunchon, October 30-31, 1997
• /
• pp.13-19
• /
• 1997

From the formation of the monodispersed silica particle which is a valuable for the industry by Sol-Gel process, the effects of the parameters participated in the process, the growth mechanism and the characteristics of silica particles for each rection conditions are investigated. To investigate about the formation of final silica particles, the suspension which performs the polymerization is reacted with molybdic acid, and the evolutions of TEOS and silica particle size are investigated in the reaction time ？ 새 the characteristics of molybdic acid with the suspension. From the results, a constant number of silica particle is formed at early reaction stage. Silica particles grow through the aggregation of smaller particles and nucleation is rate-limiting step for the growth of particles. In the conditions of this study, spherical silica particles are formed, [NH$_3$] and [$H_2O$] concentration increase the particle size but particle size decrease with [$H_2O$] concentration which is a certain above region. Average particle sizes are 187.4~483.3 nm and standard deviations in the average particle size are 1.7~2.9% with each experimental condition. From the BET results, specific surface area is 5.5~23.4 $m^2$/g and these values decrease with increase size. The average pore size is 50~70$\AA$.