• 제목/요약/키워드: Silent Discharge

검색결과 102건 처리시간 0.038초

플라즈마 발생용 전원장치의 LCD 패널 세정효과에 관한 연구 (A Study of LCD Panel Cleaning Effect of Plasma Generation Power Source)

  • 김규식
    • 전자공학회논문지SC
    • /
    • 제45권5호
    • /
    • pp.44-51
    • /
    • 2008
  • UV 램프 시스템은 오랫동안 TFT LCD 나 PDP 의 패널 세정에 사용되어 왔으나, 저렴한 가격의 고성능 세정에 대한 필요성 때문에 고전압 플라즈마 세정에 대한 기술이 개발되고 그 성능이 향상되어 왔다. 장벽방전 (barrier discharge) 혹은 무성방전 (silent discharge)으로 불리는 유전체 장벽 방전 (Dielectric-Barrier Discharges, DBDs) 는 오존 발생기에 주로 이용되어 왔다. 본 논문에서는 LCD 세정용으로 6kW 급 고전압 플라즈마 발생장치를 구현하였다. 3상 입력전압을 직류로 정류한 뒤, 인버터 시스템에 의해 고주파 펄스로 바꾸고 고압 트랜스퍼머를 거쳐 다이오드로 정류한다. 마지막으로, 고압 플라즈마를 발생시키기 위해 양방향 고전압 펄스 스위칭회로가 사용되었다. 실험을 통해 상압 플라즈마가 LCD 패널 세정에 크게 유용함을 보였다.

그물방전극 형상과 방전공격이 오존생에 미치는 영향 (Influences of Mesh Shapes and Interspacings on Ozone Generation Characteristics)

  • 박승록;이재찬;문재덕;정성진
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2000년도 학술대회 논문집 전문대학교육위원
    • /
    • pp.29-32
    • /
    • 2000
  • Ozone has been widely applied to many industrial fields because of its strong oxidation effects. Therefore, the studies have been progressed for the effective and high concentration of one generation. The silent or surface discharge have been mainly used for high concentration ozone generation until now. But these two types of ozone generators have shortcomings to be improved. In this study, the ozone generator which improved the shortcomings of above two type of ozone generators was proposed and manufactured for high concentration ozone generation. And the proposed ozone generator could generate the surface and barrier discharge simultaneously. For this purpose, a mesh type discharge electrodes were proposed and the experiments were fulfilled as a function of the widths and spacings of mesh electrodes and gap spacings between the dielectric barrier and mesh electrode. When the width of mesh electrode[WM] and spacing of mesh electrode[SM] are 0.3[mm] and 0.8[mm] respectively, the maximum ozone concentration of 2.96[vol%] was obtained at 5.6[kV], 830[mA], gap spacing (S)=0.65[mm].

  • PDF

신규 저소음 및 고효율 머플러 적용 회전식 압축기 개발 (Development of a Low Noise and High Efficiency Rotary Compressor with a New Muffler)

  • 장인선;김봉준;윤영;성춘모;이승갑
    • 한국유체기계학회 논문집
    • /
    • 제8권2호
    • /
    • pp.23-30
    • /
    • 2005
  • The rotary compressor is widely used in the air conditioner because it is efficient and compact. Recently, the need for silent and efficient compressors is much stronger than the past. The new type muffler was invented to reduce the noise level and to improve the efficiency. The new type muffler that has two side discharge holes and dome shape resulted in much lower overall noise level, especially noise levels around 1kHz than the old type one of one center discharge hole in the acoustic spectra. Also it showed a higher efficiency of air conditioner by lowering oil discharging amount of a compressor than old type one of a rectangular shape and two side discharge holes. The noise reduction and efficiency improvement by the new type muffler were verified by tests for votary compressors and air conditioners.

오존발생기의 특성 연구 및 모니터링 시스템 구축 (A Study on the Characteristics of Ozonizers and Implementation of a Monitoring System)

  • 김용철;김규식;최주엽
    • 전력전자학회논문지
    • /
    • 제6권5호
    • /
    • pp.460-466
    • /
    • 2001
  • 오존의 산화력은 상용의 산화제중에서 가장 강력하고 따라서 수처리에서 염소를 대체해 가고 있다. 또한, 수처리 시 효율적인 에너지절감을 위해서도 고농도의 오존이 요구되고 무성방전 오존발생기가 산업체에서 효과적이고 가장 널리 사용된다. 본 연구에서 오존방전전압, 주파수, 오존방전관 내의 온도 등이 오존발생율을 결정짓는 주요한 변수임을 확인하였다. 이들 변수들을 효과적으로 제어하기 위해 그래픽사용자 인터페이스를 갖는 모니터링 시스템을 구축하였다. 이 시스템은 윈도우 98에서 C++과 LabView로 프로그램 하였다.

  • PDF

세라믹(Ba-Ti-Si) 방전관의 오존발생특성 (A Study on Ozone Generation Characteristic Using Ba-Ti-Si Ceramic Tube)

  • 이태관;이동훈
    • 대한환경공학회지
    • /
    • 제28권5호
    • /
    • pp.543-548
    • /
    • 2006
  • 본 논문은 Ba-Ti-Si형 고유전체 세라믹촉매방전관의 오존발생특성에 관해 연구이다. 기본적인 실험조건은 방전관의 외부직경 52 mm, 방전관 길이 350 mm, 전원 주파수 900 Hz, 냉각수 온도 $25^{\circ}C$, 유량 5, 10, 20 L/min, 방전관 내부 압력 1.2, 1.4, 1.6 atm 그리고 방전관과 전극 사이는 0.4, 0.6, 0.8 mm이다. 그리고 실험결과의 특성들은 오실로스코프상에 나타난 리사쥬 도형의 값을 환산한 소비전력으로 유량 20 L/min, 방전간격 0.6 mm, 압력 1.6 atm 그리고 반응기 내의 무성방전에 사용된 소비전력 150 W에서 최대 오존발생효율 175 g/kWh를 얻을 수 있었다. 그리고 최대 오존발생효율 영역은 1.6 atm 이하의 압력에서는 유량 20 L/min 이하에서 측정되었다. 또한 최대 오존발생효율의 영역은 1.6 atm 이상의 압력에서는 유량 20 L/min 이상인 경우에 오존발생 효율이 높아졌다.

대기중에서 구형 유전체 펠렛의 전계 분포 특성 평가 (The simulation on a electric field distribution of dielectric pellets with a shape of ball at atmosphere)

  • 이동훈;박홍재;박재윤
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2003년도 춘계학술대회 논문집 유기절연재료 방전 플라즈마연구회
    • /
    • pp.57-60
    • /
    • 2003
  • This paper explained electric field distribution's characteristics of dielectric pellets with a shape of ball to voltage. When discharge gap of electrode and input voltage are each 20[mm], 10000[V], the electric field simulation results of dielectric pellets with a shape of ball with relative dielectric constant of several kind measured stronger electric field near electric pellets with a shape of ball of ${\phi}5$[mm] than $1{\phi}$[mm] and $3.33{\phi}$[mm] at atmosphere. And the maximum electric field of dielectric pellets with a shape of ball over ${\phi}5$[mm] increased about 5[%] to maximum electric field of electric pellets with a shape of ball ${\phi}5$[mm]. And the result of simulation, when relative dielectric constant of dielectric pellets with a shape of ball is 100, it measured about 90[%] of maximum electric field of dielectric pellets with a shape of ball with relative dielectric constant over 1000.

  • PDF

무성방전식 오존발생기의 운영비 산정을 위한 프로그램 개발 (Program development for calculating the operating costs of silent discharge ozone generator)

  • 유정호;이경;심성현;이경혁
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2011년도 제42회 하계학술대회
    • /
    • pp.1576-1577
    • /
    • 2011
  • 오존은 수처리공정에서 사용되고 있는 산화제중에서 염소 다음으로 가장 강력한 산화력을 가지고 있는 물질이다. 그에 따라 상 하수도, 축산폐수, 농약등 오염원을 효과적으로 제거하는데 활용이 확대되고 있는 추세이다. 또한 2차적인 오염물질이 없다는 점에서 더욱 다양한 분야에서 적용되고 있다. 현재 오존을 발생시키기 위해 다양한 기술이 개발되고 있으며, 그 중에서 1857년 Siemens에 의해 개발된 무성방전식 오존발생기가 최근 가장 널리 사용되고 있다. 본 연구에서는 무성방전식 오존발생기에 대한 최적 운전점을 도출하기 위한 시뮬레이션을 JAVA로 프로그램하고 실제 운영현장에 적용하여 결과를 도출하였다.

  • PDF

동축원통형 오존발생기의 원료가스 온도의존특성 (Gas-Temperature Characteristics of a Co-axial Cylinder-type Ozonizer)

  • 이상근;전병준;우성훈;이광식;이동인;송현직;이동헌
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2001년도 하계학술대회 논문집 C
    • /
    • pp.1759-1761
    • /
    • 2001
  • In this paper, a co-axial cylinder type ozonizer using silent discharge known as an ozone generation was designed and fabricated. A cooling system was installed to investigate the characteristics of ozone generation in accordance with temperature change of the supplied gas known as an important factor. The characteristics of ozone generation were investigated in accordance with the existence of cooling system and the change of cooling temperature.

  • PDF

Evaluation of Ozone for Metal Oxide Thin Film Fabrication

  • Lim, Jung-Kwan;Park, Yong-Pil;Jang, Kyung-Uk;Lee, Hee-Kab
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
    • /
    • pp.675-678
    • /
    • 2004
  • Ozone is usually generated from oxygen gas using a silent discharge apparatus and its concentration is less then 10 mol%. An ozone condensation system is constructed for metal oxide thin film fabrication. Ozone is condensed by the adsorption method, which is widely used for the growth of oxidation thin films such as superconductor. Highly condensed ozone is analyzed by three methods; ultraviolet absorption, thermal decomposition and Q-mass analyzing methods. Thermal decomposition method is most effective in the highly condensed ozone region and its method is superior to Q-mass analyzer for determining ozone concentration because of the simplicity of the method.

  • PDF

고주파 전원인가에 의한 무성방전 특성에 관한 연구 (The characteristics of Silent discharge using RF power source)

  • 이상근;이동욱;전병준;송현직;이광식;권혁한
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2000년도 추계학술대회 논문집 학회본부 C
    • /
    • pp.570-572
    • /
    • 2000
  • The characteristics of ozone generation were investigated in accordance with varying the diameter of internal electrode in an ozonizer using RF power source. The characteristics of ozone generation were improved with the diameter of internal electrode increased, but thermal loss was increased. Therefore, it was found that it is inevitable that the cooler has to be installed in an ozonizer which uses RF power source.

  • PDF