DOI QR코드

DOI QR Code

Development of a Low Noise and High Efficiency Rotary Compressor with a New Muffler

신규 저소음 및 고효율 머플러 적용 회전식 압축기 개발

  • 장인선 (삼성전자 DA총괄 시스템가전사업부) ;
  • 김봉준 (삼성전자 DA총괄 시스템가전사업부) ;
  • 윤영 (삼성전자 DA총괄 시스템가전사업부) ;
  • 성춘모 (삼성전자 DA총괄 시스템가전사업부) ;
  • 이승갑 (삼성전자 DA총괄 시스템가전사업부)
  • Published : 2005.04.01

Abstract

The rotary compressor is widely used in the air conditioner because it is efficient and compact. Recently, the need for silent and efficient compressors is much stronger than the past. The new type muffler was invented to reduce the noise level and to improve the efficiency. The new type muffler that has two side discharge holes and dome shape resulted in much lower overall noise level, especially noise levels around 1kHz than the old type one of one center discharge hole in the acoustic spectra. Also it showed a higher efficiency of air conditioner by lowering oil discharging amount of a compressor than old type one of a rectangular shape and two side discharge holes. The noise reduction and efficiency improvement by the new type muffler were verified by tests for votary compressors and air conditioners.

Keywords

References

  1. Sano, K., 1984, 'Analysis of hermetic rolling piston type compressor noise and counter measurements,' Proc. of 1984 International Compressor Conference at Purdue, pp. 242-250
  2. Kawaguchi, S., 1986, 'Noise reduction of rolling piston type rotary compressor,' Proc. of 1986 International Compressor Conference at Purdue, pp. 550-565
  3. Shige, N., 1990, 'Prediction & visualization of a three dimensional sound field to reduce the noise of rotary compressors,' Proc. of 1986 International Compressor Conference at Purdue, pp. 594-601
  4. Munjal, M. L., 1987, Acoustics of ducts and mufflers, John Wiley & Sons, Inc., New York
  5. 김봉준, 윤영, 정철홍, 이승갑, 2003, '저소음 머플리 적용 회전식 압축기의 소음 저감,' 한국소음진 동공학회 추계 학술대회, pp. 141-145

Cited by

  1. A numerical study with FSI mode on the characteristics of pressure fluctuation and discharge valve motion in rotary compressors with single and dual muffler vol.11, pp.4, 2010, https://doi.org/10.1007/s12541-010-0068-2