• KIPS Transactions on Software and Data Engineering
• /
• v.12 no.10
• /
• pp.461-470
• /
• 2023

While speech animation generation employing deep learning has been actively researched for English, there has been no prior work for Korean. Given the fact, this paper for the very first time employs supervised deep learning to generate Korean speech animation. By doing so, we find out the significant effect of deep learning being able to make speech animation research come down to speech recognition research which is the predominating technique. Also, we study the way to make best use of the effect for Korean speech animation generation. The effect can contribute to efficiently and efficaciously revitalizing the recently inactive Korean speech animation research, by clarifying the top priority research target. This paper performs this process: (i) it chooses blendshape animation technique, (ii) implements the deep-learning model in the master-servant pipeline of the automatic speech recognition (ASR) module and the facial action coding (FAC) module, (iii) makes Korean speech facial motion capture dataset, (iv) prepares two comparison deep learning models (one model adopts the English ASR module, the other model adopts the Korean ASR module, however both models adopt the same basic structure for their FAC modules), and (v) train the FAC modules of both models dependently on their ASR modules. The user study demonstrates that the model which adopts the Korean ASR module and dependently trains its FAC module (getting 4.2/5.0 points) generates decisively much more natural Korean speech animations than the model which adopts the English ASR module and dependently trains its FAC module (getting 2.7/5.0 points). The result confirms the aforementioned effect showing that the quality of the Korean speech animation comes down to the accuracy of Korean ASR.

• Journal of the Society of Naval Architects of Korea
• /
• v.60 no.5
• /
• pp.375-387
• /
• 2023

The subsea power cables are increasingly important for harvesting renewable energies as we develop offshore wind farms located at a long distance from shore. Particularly, the continuous flexural motion of inter-array dynamic power cable of floating offshore wind turbine causes tremendous fatigue damages on the cable. As the subsea power cable consists of the helical structures with various components unlike a mooring line and a steel pipe riser, the fatigue analysis of the cables should be performed using special procedures that consider stick/slip phenomenon. This phenomenon occurs between inner helically wound components when they are tensioned or compressed by environmental loads and the floater motions. In particular, Vortex-induced vibration (VIV) can be generated by currents and have significant impacts on the fatigue life of the cable. In this study, the procedure for VIV fatigue analysis of the dynamic power cable has been established. Additionally, the respective roles of programs employed and required inputs and outputs are explained in detail. Demonstrations of case studies are provided under severely sheared currents to investigate the influences on amplitude variations of dynamic power cables caused by the excitation of high mode numbers. Finally, sensitivity studies have been performed to compare dynamic cable design parameters, specifically, structural damping ratio, higher order harmonics, and lift coefficients tables. In the future, one of the fundamental assumptions to assess the VIV response will be examined in detail, namely a narrow-banded Gaussian process derived from the VIV amplitudes. Although this approach is consistent with current industry standards, the level of consistency and the potential errors between the Gaussian process and the fatigue damage generated from deterministic time-domain results are to be confirmed to verify VIV fatigue analysis procedure for slender marine structures.

• Journal of Korean Medicine Rehabilitation
• /
• v.33 no.4
• /
• pp.45-59
• /
• 2023

Objectives The aim of this study was to analyze the trends of researches on oriental medicine treatments for supraspinatus tendinopathy. Methods We used five databases for searching researches; Korean studies Information Service System, Oriental Medicine Advanced Searching Integrated System, Research Information Sharing Service, PubMed, and China National Knowledge Infrastructure. Only randomized controlled trials suitable for the subject were selected. The methodological quality of included randomized controlled trials (RCTs) was assessed by the Cochrane risk of bias tool. Results Twenty randomized controlled trials were analyzed. There were 9 types of treatment interventions; acupuncture, acupotomy, pharmacopuncture, electroacupuncture, fire needling, warming needle, catgut-embedding therapy, herbal medicine, cupping. The most frequently used treatment intervention was acupuncture and acupotomy. There were 9 outcome measurements including visual analog scale (VAS), Constant-Murley Score (CMS), and range of motion. The most used measurement was VAS. As a result of meta-analysis, acupuncture was more effective than control group in VAS. Additionally, acupotomy was clinically significant compared to control groups in VAS and CMS. Conclusions In this review, we analyzed researches on effectiveness of oriental medicine for supraspinatus tendinopathy. A provisional conclusion can be produced that acupuncture and acupotomy showed beneficial effect to supraspinatus tendinopathy. Although there were some RCT studies, many of them had a high risk of bias, so it is hard to conclude that our study can include overall clinical status. Further well-designed trials are needed.

• Journal of The Korean Association For Science Education
• /
• v.27 no.7
• /
• pp.631-638
• /
• 2007

This study investigated the influences of a student-centered analogical instruction using physical analogies upon students' conception and application, retention of conception and application, perceptions of science classroom environment, and perceptions of analogical instruction. Six classes of seventh graders (N=208) at a middle school in Seoul were assigned to the control, the teacher-centered analogy (TCA), and the student-centered analogy (SCA) groups. They were taught about 'three states of matter' and 'motion of molecules' for 8 class hours. Analysis of the results revealed that the scores of the SCA group were significantly higher than those of the other groups in the conception test, retention test of conception and application, and perception test of science classroom environment. The scores of the SCA group in the application test were also higher than those of the other groups, but there was a significant difference only between the control and the SCA groups. The TCA group performed significantly better than the control group only in the test of the retention of application. In addition, the students in the SCA group exhibited more positive perceptions of the analogical instruction than those in the TCA group. Educational implications are discussed.

• Journal of The Korean Association For Science Education
• /
• v.26 no.3
• /
• pp.385-392
• /
• 2006

This study investigated the effects of weekly reports as a method for encouraging student questions in middle school science instruction by focusing on student conceptual understanding, achievement, concept map, and perceptions of weekly reports. Seventh graders (N=211) from a middle school were assigned to control and weekly reports (WR) groups. All students were taught about the 'three states of matter', the 'motion of molecules', and the 'change of states and thermal energy' for eighteen class hours. Students in the WR group were required to write weekly reports for six of those periods. Results revealed that conception test scores for the WR group were significantly higher than those for the control group. Compared conception test scores by learning strategy, students using a surface learning strategy in the WR group scored significantly higher than those in the control group. While students employing a deep learning strategy in the WR group also performed better than those in the control group, the difference was relatively small. The scores of an achievement test and a concept map test for the WR group were significantly higher than those for the control group. However, there were no significant interactions between instruction and students' learning strategy in the two variables. It was also found that most students in the WR group positively perceived weekly reports.

• Clinics in Shoulder and Elbow
• /
• v.26 no.4
• /
• pp.343-350
• /
• 2023

Background: Our purpose was to evaluate a custom reverse total shoulder arthroplasty glenoid baseplate for severe glenoid deficiency, emphasizing the challenges with this approach, including short-term clinical and radiographic outcomes and complications. Methods: This was a single-institution, retrospective series of 29 patients between January 2017 and December 2022 for whom a custom glenoid component was created for extensive glenoid bone loss. Patients were evaluated preoperatively and at intervals for up to 5 years. All received preoperative physical examinations, plain radiographs, and computed tomography (CT). Intra- and postoperative complications are reported. Results: Of 29 patients, delays resulted in only undergoing surgery, and in three of those, the implant did not match the glenoid. For those three, the time from CT scan to implantation averaged 7.6 months (range, 6.1-10.7 months), compared with 5.5 months (range, 2-8.6 months) for those whose implants fit. In patients with at least 2-year follow-up (n=9), no failures occurred. Significant improvements were observed in all patient-reported outcome measures in those nine patients (American Shoulder and Elbow Score, P<0.01; Simple Shoulder Test, P=0.02; Single Assessment Numeric Evaluation, P<0.01; Western Ontario Osteoarthritis of the Shoulder Index, P<0.01). Range of motion improved for forward flexion and abduction (P=0.03 for both) and internal rotation up the back (P=0.02). Pain and satisfaction also improved (P<0.01 for both). Conclusions: Prolonged time (>6 months) from CT scan to device implantation resulted in bone loss that rendered the implants unusable. Satisfactory short-term radiographic and clinical follow-up can be achieved with a well-fitting device. Level of evidence: III.

• Nuclear Engineering and Technology
• /
• v.55 no.11
• /
• pp.3940-3955
• /
• 2023

A new method of numerical simulating prediction and decontamination effect evaluation for abrasive jet decontamination to radioactively contaminated metal is proposed. Based on the Computational Fluid Dynamics and Discrete Element Model (CFD-DEM) coupled simulation model, the motion patterns and distribution of abrasives can be predicted, and the decontamination effect can be evaluated by image processing and recognition technology. The impact of three key parameters (impact distance, inlet pressure, abrasive mass flow rate) on the decontamination effect is revealed. Moreover, here are experiments of reliability verification to decontamination effect and numerical simulation methods that has been conducted. The results show that: ⁶⁰Co and other homogeneous solid solution radioactive pollutants can be removed by abrasive jet, and the average removal rate of Co exceeds 80%. It is reliable for the proposed numerical simulation and evaluation method because of the well goodness of fit between predicted value and actual values: The predicted values and actual values of the abrasive distribution diameter are Ф57 and Ф55; the total coverage rate is 26.42% and 23.50%; the average impact velocity is 81.73 m/s and 78.00 m/s. Further analysis shows that the impact distance has a significant impact on the distribution of abrasive particles on the target surface, the coverage rate of the core area increases at first, and then decreases with the increase of the impact distance of the nozzle, which reach a maximum of 14.44% at 300 mm. It is recommended to set the impact distance around 300 mm, because at this time the core area coverage of the abrasive is the largest and the impact velocity is stable at the highest speed of 81.94 m/s. The impact of the nozzle inlet pressure on the decontamination effect mainly affects the impact kinetic energy of the abrasive and has little impact on the distribution. The greater the inlet pressure, the greater the impact kinetic energy, and the stronger the decontamination ability of the abrasive. But in return, the energy consumption is higher, too. For the decontamination of radioactively contaminated metals, it is recommended to set the inlet pressure of the nozzle at around 0.6 MPa. Because most of the Co elements can be removed under this pressure. Increasing the mass and flow of abrasives appropriately can enhance the decontamination effectiveness. The total mass of abrasives per unit decontamination area is suggested to be 50 g because the core area coverage rate of the abrasive is relatively large under this condition; and the nozzle wear extent is acceptable.

• Journal of Korean society of Dental Hygiene
• /
• v.24 no.4
• /
• pp.271-280
• /
• 2024

Objectives: This study aimed to test whether the digital competence of dental hygienists can affect their intraoral scanning potential in terms of scan time and error. Methods: Dental hygienists and dental hygiene students who had never used an intraoral scanner were surveyed to determine their digital competence. Individual data collected using an intraoral scanner was compared with reference data collected using a model scanner to identify scanning errors, and participants' scanning times were measured. Results: A significant decrease in scanning time was observed as the overall level of digital competence increased. The increase in digital skills and digital knowledge led to a decrease in scanning time by 3.73 and 3.98 minutes, respectively. Conclusions: This study found that digital competence was associated with reduced scan times, but less so with scan errors. This may be due to recent advances in scanning software, and future studies may need to develop a digital competence assessment tool that is more appropriate for the dental field.

• The Journal of Korean Academy of Prosthodontics
• /
• v.54 no.3
• /
• pp.226-233
• /
• 2016

Purpose: The purpose of this study was to evaluate the adaptation of lithium disilicate crowns fabricated by CAD-CAM (computer aided design-computer aided manufacturing) and heat-press technique to compare two different measurement methods in assessing fit of the ceramic crowns: micro CT and cross-section technique. Materials and methods: A prepared typodont mandibular molar for ceramic crown was duplicated and ten dies were produced by milling the PMMA (polymethylmethacrylate) resin. Ten vinyl polysiloxane impressions were made and stone casts were produced. Five dies were used for IPS e.max Press crowns with heat-press technique. The other five dies were used for IPS e.max CAD crowns with CAD-CAM technique. Ten lithium disilicate crowns were cemented on the resin dies using zinc phosphate cement with finger pressure. The marginal and internal fits in central buccolingual plane were evaluated using a micro CT. Then the specimens were embedded and cross-sectioned and the marginal and internal fits were measured using scanning electronic microscope. The two measurement methods and two manufacturing methods were compared using Mann-Whitney U test (SPSS 22.0). Results: The marginal and internal fit values using micro CT and cross-section technique were similar, showing no significant differences. There were no significant differences in adaptation between lithium disilicate crowns fabricated with CAD-CAM and heat-press technique. Conclusion: Both micro CT and cross-section technique were acceptable methods in the evaluation of marginal and internal fit of lithium disilicate crown. There was no difference in adaptation between lithium disilicate crowns fabricated with CAD-CAM and heat-press technique except occlusal fit.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.8 no.2
• /
• pp.109-114
• /
• 2009

Purpose: The purpose of this study is to compare the clinical results of ACL reconstruction between two groups using hamstring tendon autograft and tibialis anterior tendon allograft. Materials and Methods: Between January 2006 and June 2007, we analyzed 68 cases of ACL reconstruction, 32 cases using hamstring tendon autograft and 36 cases using tibialis anterior tendon allograft, with a minimum follow-up of 24 months. For the clinical evaluation, we evaluated the Lysholm score, anterior laxity by Telos device and KT-2000 arthrometer. Results: The mean diameter of graft were 8.0 mm (7.0~9.0 mm) in autograft group and 9.1 mm (8.0~10.0 mm) in allograft group. In all cases, the range of motion was above 135 degrees. The average side to side difference in Telos stress test decreased from $7.3{\pm}1.0$ mm to $2.4{\pm}1.1$ mm in autograft group and from $7.4{\pm}1.2$ mm to $2.3{\pm}1.3$ mm in allograft group. The average Lysholm knee score improved from $72.6{\pm}3.4$ to $92.3{\pm}3.5$ in autograft group and from $72.3{\pm}3.5$ to $91.6{\pm}3.3$ in allograft group. There was no significant difference between two groups in clinical results. Conclusion: Both hamstring tendon autograft and tibialis anterior tendon allograft groups showed satisfactory clinical results, with no significant difference in outcomes between the groups. We suggest that both hamstring tendon autograft and tibialis anterior tendon allograft will be considered as acceptable graft for anterior cruciate ligament reconstruction.