• The KSFM Journal of Fluid Machinery
• /
• v.20 no.2
• /
• pp.63-68
• /
• 2017

This paper predicts the rotordynamic force coefficients of tilting pad journal bearings (TPJBs) with ball-socket pivot and compares the predictions to the published test data obtained under load-between-pad (LBP) configuration. The present TPJB model considers the pivot stiffness calculated based on the Hertzian contact stress theory. Due to the compliance of the pivot, the predicted journal eccentricity agree well with the measured journal center trajectory for increasing static loads, while the early prediction without pivot model consideration underestimates it largely. The predicted pressure profile shows the significant pressure development even on the unloaded pads along the direction opposite to the loading direction. The predicted stiffness coefficients increase as the static load and the rotor speed increase. They agree excellently with test data from open literature. The predicted damping coefficients increase as the static load increases and the rotor speed decreases. The prediction underestimates the test data slightly. In general, the current predictive model including the pivot stiffness improves the accuracy of the rotordynamic performance predictions when compared to the previously published predictions.

• Wind and Structures
• /
• v.13 no.5
• /
• pp.433-449
• /
• 2010

Wind tunnel model tests were conducted for a residential apartment block located within the complex terrain of The Hong Kong University of Science and Technology (HKUST). The test building is typical of medium-rise residential buildings in Hong Kong. The model study was conducted using modelling techniques and assumptions that are commonly used to predict design wind loads and pressures for buildings sited in regions of significant topography. Results for the building model with and without the surrounding topography were compared to investigate the effects of far-field and near-field topography on wind characteristics at the test building site and wind-induced external pressure coefficients at key locations on the building facade. The study also compared the wind tunnel test results to topographic multipliers and external pressure coefficients determined from nine international design standards. Differences between the external pressure coefficients stipulated in the various standards will be exacerbated when they are combined with the respective topographic multipliers.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.5
• /
• pp.632-639
• /
• 2004

In this paper, an inverse problem of glass forming process is studied to determine a number of unknown heat transfer coefficients which are imposed as boundary conditions. An analysis program for transient heat conduction of axi-symmetric dimension is developed to simulate the forming and cooling process. The analysis is repeated until it attains periodic state, which requires at least 30 cycles of iteration. Measurements are made for the temperatures at several available time and positions of glass and moulds in operation. Heat removal by the cooling water from the plunger is also recorded. An optimization problem is formulated to determine heat transfer coefficients which minimize the difference between the measured data and analysis results. Significant time savings are achieved in finite difference based sensitivity computation during the optimization by employing distributed computing technique. The analysis results by the optimum heat transfer coefficients are found to agree well with the measured data.

• Korean Journal of Remote Sensing
• /
• v.16 no.2
• /
• pp.109-116
• /
• 2000

This study was carried out to assess the use of RADARSAT data which is C-band with HH polarization for the rice growth monitoring in Korea. Nine time-series data were taken by shallow incidence angle (standard beam mode 5 or 6) during rice growing season. And then, backscattering coefficients ($\sigma$$^{\circ}$) were extracted by calibration process for comparing with rice growth parameters such as plant height, leaf area index(LAI), and fresh and dry biomass. Field experimental data concerned with rice growth were collected 8 times for the ground truth at the study area, Tangjin, Chungnam, Korea. At the beginning of rice growth, backscattering coefficients were ranged from -l6~-l3dB when rice fields were not covered with rice canopy and flooded. At the maximum vegetative stage of rice, backscattering coefficients of the rice field were the highest ranging from -4.4dB~-3.1dB. The temporal variation of backscattering coefficient($\sigma$$^{\circ}$) in rice field was significant in this study. Backscattering coefficient ($\sigma$$^{\circ}$) of rice field was a little bit lower again after heading stage than before. This results show RADARSAT data is promising for rice monitoring.

• Wind and Structures
• /
• v.38 no.3
• /
• pp.203-214
• /
• 2024

Large-span cantilevered roof represents a unique type of structure that is vulnerable to wind loads. Inspired by the need to maximumly reducing the rooftop wind loads, this study examined the feasibility of positioning vented slots on the leading edge, and the effectiveness of such aerodynamic mitigation measures are assessed via both physical and numerical simulations. The reliability of numerical simulation was evaluated via comparisons with the wind tunnel tests. The results indicated that, the variation of venting hole arrangement can cause significant change in the rooftop wind load characteristics. For the cases involved in this study, the maximum reduction of mean and peak wind suction coefficients are found to be 9% and 8% as compared to the original circular slot without venting holes. In addition, the effect of slot shape is also evident. It was shown that the triangular shaped slot tends to increase the wind suction near the leading edge, whereas the hexagonal and octagonal shaped slots are found to decrease the wind suction. In particular, with the installation of octagonal shaped slot, the maximum reduction of wind suction coefficients near the leading edge reaches up to 31% as compared to the circular shaped slot, while the maximum reduction of mean wind suction coefficients is about 30%.

• Journal of Preventive Medicine and Public Health
• /
• v.57 no.4
• /
• pp.399-406
• /
• 2024

Objectives: This study developed a causal relationship model of herb use from observational data and analyzed the direct and indirect effects of herb use on health according to the model. Methods: A cross-sectional study was conducted with 400 participants aged 26-59 years, selected through multistage random sampling. The instruments used for data collection included demographic information, herb use, health literacy (HL), perceived social support, societal values, and attitudes toward herb use. The conceptual model, hypothesized based on prior evidence, was tested using confirmatory factor analysis through structural equation modeling. Path coefficients were estimated using the maximum likelihood method. Results: The final model utilized empirical data, which showed that perceived social support had the most significant impact on herb use. This was followed by HL, positive attitudes toward herbal remedies, and societal values, with coefficients of 0.31, 0.18, and 0.16, respectively. When analyzing variables that indirectly affected herb use, it was clear that positive attitudes, perceived social support, and societal values significantly influenced herb use through HL, with influence coefficients of 0.08, 0.16, and 0.04, respectively. Together, these variables accounted for 68% of the variance in herb use. Conclusions: The findings from this study can be utilized to develop and implement strategies that guide the use of herbal products, ultimately aiming to improve human health.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.16 no.4
• /
• pp.412-420
• /
• 2009

Purpose: The purpose of this study was to identify the relationship between empowerment and performance of infection control by emergency department nurses. Method: Participants were 190 nurses working in emergency departments in 14 hospitals located in Busan. Descriptive statistics, t-test, ANOVA, and Pearson's correlation coefficients with SPSS PC+ WIN 12.0 were used to analyze the data. Results: There were significant differences in empowerment by years in ED (emergency departments) and position. There was a significant differences in performance of infection control by position. There were significant differences in empowerment by infection control-related characteristics and by regular conference for infection control. There was a significant and positive relationship between empowerment and performance of infection control in ED nurses. Conclusion: The results of this study indicate that improvement in the level of ED nurse's empowerment would lead to an increase in the performances of infection control.

• Journal of the Korean Society of School Health
• /
• v.23 no.2
• /
• pp.207-216
• /
• 2010

Purpose: The purpose of this study was to identify the relationship between spiritual well-being, depression and life satisfaction majoring in human service area. Methods: The subjects were 212 college students. Data was collected from september 15 to October 26, 2009 using questionnaires. Means with standard deviation, t-test, ANOVA, and Pearson correlation coefficients were used to analyze the data. Results: According to general characteristics of the students, there were statistically significant differences in spiritual well-being for religion and religious influence, in depression, there was statistically significant difference for health status, and in life satisfaction, there were statistically significant differences monthly pocket money, health status, current survival parents status, current problem. significant correlations were seen between spiritual well-being and depression (r=-.386, p =.000), life satisfaction (r=.536, p =.000). Conclusion: Spiritual well-being was significantly effects on depression and the life satisfaction. The finding suggest that it is needed to develop effective programs to improve spiritual well-being for college students.

• Journal of Korean Academy of Nursing
• /
• v.3 no.2
• /
• pp.101-109
• /
• 1973

The present study in the view of humanistic psychology was attempted to seek the purpose of study, the relationship between nurses′working efficiency that measured by an observational working efficiency scale and their subjective perception. "Perceptual orientation scale"(Choy, Chung Hoon 1971) was administered to 100 nurses during the Period of May to July 1972, and the relationship with their ratings by their supervising head nurses. Educational background, ages, and their lengths of caller were compared with their subjective perceptions. All the relationship were calculated by the method of chi-squares and correlational coefficients. The results of this study are summarized as follow: 1. There is no significant relationship between nurses′subjective perceptions and their working ratings. 2. There is significant relationship between nurses′subjective perceptions and their educational backgrounds. 3. There is no significant relationship between nurses′subjective perceptions and their lengths of career. 4. There is no significant relationship between nurses′subjective perceptions and their ages. The results of the present study are interpreted to the sampled research group of this study and are not to be extended to any other groups.

• Journal of Environmental Health Sciences
• /
• v.17 no.1
• /
• pp.95-103
• /
• 1991

For the purpose of estimating the working environment and the relationship between the airborne lead concentration and the ZPP level in the whole blood of the workers, the airborne lead concentrations and the ZPP level were measured at the 26 plants which deal with lead, from October 5 to November 5 in 1988. Analysis of the airborne lead concentration was performed by NIOSH Method 7082, and the ZPP level was measured by a hematofluorometer. The following results are concluded. 1. The average airborne lead concentration of the lead battery manufactures is 0.025mg/m$^{3}$ and that of the secondary lead smelters is 0.023mg/m$^{3}$. There were no significant differences between industry (p>0.1) 2. At the lead battery manufacture, the process of lead powder production showed the highest concentration of 0.034mg/m$^{3}$ but there were no significant differences among the processes (p>0.1). At the secondary lead smelter, the process of dismantling waste batteries showed the highest concentration 0.141mg/m$^{3}$, and there were very significant differences among the processes (p<0.005). 3. The ZPP level in the whole blood showed significant differences between industry (p<0.10). The average ZPP level of the lead battery manufactures is 133.0 + 106.3 $\mu$g/100ml and that of the secondary lead smelters is 149.6 + 110.9 $\mu$g/100ml. 4. The correlation coefficients between the airborne lead concantration and ZPP level were 0. 426 (p<0.001) for the lead battery manufactures and 0.484 (p<0.001) for the secondary lead smelters. The correlation coefficients between the work duration (in months) and the ZPP level were 0.238 (p<0.001) for the lead battery mannfactures and 0.075 (p>0.10) for the secondary lead smelters. 5. The linear regression equation, with the airborne lead concentration as an independent variable and the ZPP level as a dependent variable, is Y=96.84+1300.34X (r=0.448, p<0.001) for the 26 plants which deal with lead. The linear regression equation, with the work duration(in months) as an independent variable and the ZPP level as a dependent variable, is Y=127.28 +0.49X (r=0.162, p<0.05). 6. The correlation coefficients between the amount of inhaled lead and ZPP level were 0.349 (p < 0.001) for the lead battery manufactures and 0.318(p<0.001) for the secondary lead smeltes. The linear regression equation for the 26 plants surveyed, with the amount of inhaled lead as an independent variable and ZPP level as a dependent variable, is Y=123.63+18.82X (r=0. 335, p<0.001).