• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.2
• /
• pp.27-35
• /
• 2009

The roundabout was developed in the United Kingdom to rectify problems associated with these traffic circles. In 1966, the United Kingdom adopted a mandatory "give-way" rule at alt circular intersections, which required entering traffic to give way, or yield, to circulating traffic. However, the roundabout used in United States or Europe do not common use in Korea. The purposes of the study is to comparatively analyze the effectiveness of roundabout. In pursuing the above, this study designs the scenarios which can reflect the directional traffic volumes, and analyzes the average control delay of roundabout and 4-leg signalized intersection by SIDRA. The main study results are as follows. First, when the entering traffic volume are less than 2,000pcph, the single-lane roundabout is analyzed to be more effective than 4-leg signalized intersection. Second, when the entering traffic volume are less than 3,200pcph, the double-lane roundabout is evaluated to be more effective than 4-leg signalized intersection. Third, which is installed left and right turn lane at intersection, area for the roundabout is analyzed to be less than that for general intersection area.

• Journal of Korean Society of Transportation
• /
• v.21 no.6
• /
• pp.57-65
• /
• 2003

Traffic congestion on the streets is the major concern of Metropolitan areas in Korea. Especially the signalized intersections are the main spots where traffic congestion is to be created. Currently the subway construction has been on the process in Taegu Metropolitan city. The subway stations are usually located at the intersections where a large number of vehicles and people are moving. During the constructional period, such an intersection creates profoundly a great deal of traffic congestion due to the open-cut constructional method. Under circumstance of the constructional method, the lane configurations should be changed frequently and the surface conditions make drivers uncomfortable. The propose of this study is to propose the improved method of traffic operation at the large circled intersection under the construction. The Signalized Modern Roundabout(SMR) is applied modifying from the modern roundabout. The geometric design and signal operation of SMR is developed in this study. To verify the operation of SMR the comparative study is conducted between the operation of the open-cut method and SMR method using the micro-simulation program, NETSIM. The result of simulation shows that the delay caused by the operation of SMR is not higher than that under the open-cut method. SMR makes also the constructional period shorten, makes the cost of construction lessened and makes drivers more comfortable as well than the method of open-cut. Therefore, the study concludes that the operation of SMR is more efficient, economic and safer method than that of open-cut method at the large circled intersection under construction.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.1
• /
• pp.243-250
• /
• 2014

Modern roundabouts referred to as relatively safer and more efficient traffic facility than the signalized intersections have been recently deployed and operated and accordingly more research efforts to improve its safety and efficiency have been made so far. This paper introduces a new traffic information system named as Smart Roundabout coupled with Connected Vehicle technique like Vehicle-to-Roadside communication, which has not been attempted before and evaluates its performance with a microscopic simulation model, VISSIM. The proposed system functions to collect driving information of circulating vehicles in the roundabout such as location, speed, critical headway, etc. and help approaching vehicles decide whether to enter the roundabout with an on-board equipment instrumented in the individual vehicle on the basis of calculated gap acceptance of interest. This new system is expected to secure more safety and increase the capacity of the modern roundabout.

• Journal of Korean Society of Transportation
• /
• v.28 no.6
• /
• pp.65-74
• /
• 2010

This study aims at developing a method for estimating passenger car equivalency (PCE) values for various vehicle types that could be considered in estimating capacity and delay at intersections without traffic signals, especially at modern small 3-leg roundabouts. Unlike signalized intersections, the PCE value has not yet been treated explicitly in traffic operations involving unsignalized intersections. Both empirical and theoretical approaches for determining the PCE values at modern small 3-leg roundabouts were evaluated. As a result, the PCEs derived in this study were highly correlated with those of field measurements.