• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.9
• /
• pp.105-111
• /
• 1999

The paper presents development of a Hardware-In-the-Loop simulation (HILS) system for the purpose of testing performance, stability, and reliability of an electronic power steering system(EPS). In order to realistically test an EPS by the proposed HILS apparatus, a simulated uniaxial dynamic rack force is applied physically to the EPS hardware by a pnumatic actuator. An EPS hardware is composed of steering wheel &column, a rack & pinion mechanism, andas motor-driven power steering system. A command signal for a pneumatic rack-force actuator is generated from the vehicle handling lumped parameter dynamic model 9software) that is simulated in real time by using a very fast digital signal processor. The inputs to the real-time vehicle dynamic simulation model are a constant vehicle forward speed and from wheel steering angles driven through a steering system by a driver. The output from a real-time simulation model is an electric signal that is proportional to the uniaxial rack force. The vehicle handling lumped parameter dynamic model is validated by a fully nonlinear constrained multibody vehicle dynamic model. The HILS system simulation results sow that the proposed HILS system may be used to realistically test the performance stability , and reliability of an electronic power steering system is a repeated way.

• 전기의세계
• /
• v.22 no.1
• /
• pp.35-41
• /
• 1973

An automatic point traffic control method is recommended for more idealistic traffic flow over coarse road netowrks. The automatic control apparatus recommended, consists of a transceiver, amplifier, digital-to-analog converter, signal light controller for emergency and steady state, and digital counter as monitor. The transmitter sends a signal to the target vy means of Microwave-FM-CW and a diode detector picks up the echo signal. Thus the operation of the entire system will be carried out through an open loop state. Some factors necessary for an ideal detector system are rapid response, longevity and stability. An analytical method of the Doppler effect substitutes the conventional frequency deviation into the amplitude of detector output. The changing rate of amplitude is proportional to the voltage of the detector output. Some induced formula from Maxwell's radiation field theory ensures this new method, and, new method, and proves the fact with an experimental data presentation. Stability depends upon Klystron as an oscillator and a diode as a detector. the transceiver installation affects on the response and sensitivity of the system. In accordance with the detector output, several targets are easily classified by amplitudes on the scope. The traffic flow, i.e., target movement which is analyzed by the amplitude method, is shown through the scope and indicates it on the digital counter. The best efficiency for the amplitude analysis can be attained through use of an antenna having the highest sensitivity.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.10 no.2
• /
• pp.38-47
• /
• 2001

In this paper, a new scheme of adaptive-neuro control system is presented to implement real-time control of robot manipulator using Digital Signal Processors. Digital signal processors, DSPs, are micro-processors that are particularly developed for fast numerical computations involving sums and products of measured variables, thus it can be programmed and executed through DSPs. In addition, DSPs are as fast in computation as most 32-bit micro-processors and yet at a fraction of therir prices. These features make DSPs a viable computational tool in digital implementation of sophisticated controllers. Unlike the well-established theory for the adaptive control of linear systems, there exists relatively little general theory for the adaptive control of nonlinear systems. Adaptive control technique is essential for providing a stable and robust perfor-mance for application of robot control. The proposed neuro control algorithm is one of learning a model based error back-propagation scheme using Lyapunov stability analysis method.The proposed adaptive-neuro control scheme is illustrated to be a efficient control scheme for the implementation of real-time control of robot system by the simulation and experi-ment.

• Journal of IKEEE
• /
• v.24 no.2
• /
• pp.446-452
• /
• 2020

In this paper, we propose a energy-saving LED module using K-band microwave motion detecting sensor. To oscillate K-band microwave signal, An oscillator using a hairpin-type microstrip resonator was designed to increase stability and make fabrication easier. To radiate the microwave signal, a two-channel(TX/RX) patch antenna arrays was developed. Wilkinson power divider and ring hybrid mixer were developed and applied to obtain Doppler shift from the received signal. Shield cans were installed to protect the stability of the signals and unwanted external noise. The proposed motion detection sensor was mounted on a demonstration LED module and the energy saving performance through pre-test was verified.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.5
• /
• pp.145-150
• /
• 2011

This study was developed the posture balance system of multi-parameter for moving body after and before exercising. Body transition meaned a head moving and upper body moving. This system has catched a signal for physical condition of body data such as a data acquisition system, data signal processing and feedback system. There were checked a parameter that measured vision, vestibular, somatosensory, CNS. This system was evaluated a data through the stability. The posture balance system can be used to support assessment for body moving in exercising situation. It was expected to monitor a physical parameter for health management system.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.7
• /
• pp.668-673
• /
• 2010

Given a periodic reference signal or disturbance, repetitive control is a special control scheme to reduce a tracking error effectively by the periodic signal generator in the repetitive controller. In general, a repetitive controller is added on the existing feedback control system to improve the tracking performance. However, because the information used in the design of the feedback controller is not taken into account, the design problem of the repetitive controller is totally another problem irrespective of that of the feedback controller. In this paper, we present a more general method to design an add-on type repetitive controller using the information on the performance of the existing feedback control system. We first show that a robust stability condition of repetitive control systems is obtained using the well-known robust performance condition of general feedback control systems. It is also shown that we can obtain a steady-state tracking error described in a simple form without time-delay element if the robust stability condition is satisfied for the repetitive control system. From the obtained results, several design criterions for repetitive controller are provided. Through the simulation study, the feasibility of the proposed method is verified.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.14 no.5
• /
• pp.28-35
• /
• 2015

This paper introduces a resistance scanning-type flexible tactile sensor for intelligent robots and presents the output characteristics of the sensor via signal processing. The sensor was produced via the lamination method using multi-walled carbon nanotubes (a conductive material), an insulator, and Tango-plus (an elastic material). Analog and digital signal processing boards were produced to analyze the output signal of the sensor. The analog signal processing board was made up of an integrator and an amplifier for signal stability, and the digital signal processing board was made up of an IIR filter for noise removal. Finally, the sensor output for the contact force was confirmed through experiments.

• Publications of The Korean Astronomical Society
• /
• v.28 no.3
• /
• pp.95-100
• /
• 2013

A fiber-optic reference signal transmission system, which transmits the 1.4 GHz reference signal from H-maser to receiver cabin in radio telescopes, was adopted for compensating the phase changes due to temperature variation and antenna movement. At the first experiment, the remote signal's phase changed more than 15 degrees at 1.4 GHz. We found unstable components in sub-system experiments and replaced them. The main cause of unstable phase stability was the unaligned polarization axis between Laser Diode and Mach-Zehnder Modulator (MZM). The improved system stability showed $1{\times}10^{-16}$ allan standard deviation at 1,000 sec integration time with the antenna fixed. When the antenna moves in the azimuth axis, the 1.4 GHz remote signal showed the phase change smaller than 0.2 degrees.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.5
• /
• pp.18-25
• /
• 1997

The feedforward control algorithm for active noise control exhibits high stability and performance robustness. But it has a slow convergence speed and requires a correlated reference signal. Broadband active control systems typically use feedback control in order to increase the convergence speed and to avoid the problems associated with obtaining and decoupling a suitable reference signal. However, it is well known that conventional feedback control systems have a gain-bandwidth limitation and stability problem. This paper presents the new system based on the combination of both feedforward and feedback system in order to increase the convergence speed. The proposed system uses a proposed control algorithm termed "optional-summed" algorithm in which the "optional summed reference signal" comprised of weighted sum of an original reference signal and a eror signal, is used as an input to an adaptive system. Thus, the proposed system can have faster convergence speed and better performance than either feedforward or feedback system using the Filtered-x LMS algorithm as almost equivalent complexity of computation as it. Several simulation results demonstrating the good properties of the proposed adaptive system as well as verifying the analytical results are also presented in the paper.

• Journal of the Institute of Convergence Signal Processing
• /
• v.10 no.3
• /
• pp.158-163
• /
• 2009

LMS(Least Mean Square) algorithm requires simple equation and is used widely because of the low complexity. If the convergence speed increase, LMS algorithm has a divergence in case of sharp environment changes. And if a stability increase, the convergence speed becomes slow. This algorithm based on a trade off between fast convergence and system stability. To improve this problem, VSSLMS (Variable Step Size LMS) algorithm was developed. The VSSLMS algorithm improved the convergence speed and performance as adjusting step size using error signal. In this paper, I-VSSLMS algorithm is proposed tor improve the performance of adaptive noise canceller in real-time environments. The proposed algorithm is applied to adaptive noise canceller using TMS320C6713 DSP board and we did simulation by real time. Then we compared performance of each algorithm and demonstrated that proposed algorithm has superior performance.