• Journal of Positioning, Navigation, and Timing
• /
• 제5권3호
• /
• pp.131-136
• /
• 2016

The present paper shows that beamforming algorithm such as Minimum Variance Distortionless Response (MVDR) based on array antenna signal processing can have not only anti-jamming but also anti-spoofing characteristics. A beam pattern due to the beamforming algorithm strengthens received signal power as it is formed in the incident direction of desired signal. During the process, the effect of unnecessary signals such as spoofing signals can be reduced because the beam pattern reduces received signal power in the incident directions excluding the beam pattern-directed direction. In order to analyze the anti-spoofing effect due to the beamforming algorithm, a software-based simulation environment was configured. An arbitrary error was applied between incident direction of Global Positioning System (GPS) satellite signal and steering vector direction of the beamforming algorithm to analyze the received signal power and required conditions were provided to see the anti-spoofing effect due to the beamforming algorithm. The used antenna was 7-element planar circular array and beam patterns were formed through the MVDR algorithm.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.202-207
• /
• 2002

EOC (Electro-Optical Camera) of KOMPSAT-1 (Korea Multi-Purpose SATellite) has been producing land imageries of the world since January 2000. After image data are acquired by EOC, they are transmitted from satellite to ground via X-band RF signal. Then, EOC image data are generated and pass through radiometric and geometric corrections to generate standard products of EOC images. After radiometric correction on EOC image data, Modulation Transfer Function (MTF) compensation is applicable on EOC images with user's request for better image quality. MTF compensation is concerned with filtering EOC images to minimize the effect of degradations. For Image Receiving and Processing System (IRPE) at KOMPSAT Ground Station (KGS), Wiener filter is used in MTF compensation for EOC images. If the Pointing Spread Function (PSF) of EOC system is known, signal-to-noise power spectra ratio is the only factor in the determination of Wiener filter. In this paper, MTF compensation in IRPE at KGS is introduced and MTF compensated EOC 1R images are generated using Wiener filters with various signal-to-noise power spectra ratios. MTF compensated EOC 1R images are correlated with EOC 1R images for observing linearities between them. As a result, the effect of signal-to-noise power spectra ratio is shown on MTF compensated EOC 1R images.

• Journal of Positioning, Navigation, and Timing
• /
• 제4권2호
• /
• pp.57-65
• /
• 2015

Global Navigation Satellite System (GNSS) including Global Positioning System (GPS) is an important element for navigation of both the military and civil Unmanned Aerial Vehicle (UAV). Contrary to the military UAVs, the civil UAVs use the civil signals which are unencrypted, unauthenticated and predictable. Therefore if the civil signals are counterfeited, the civil UAV’s position can be manipulated and the appropriate movement of the civil UAV to the target point is not achieved. In this paper, spoofing on the autonomous navigation UAV is implemented through field experiments. Although the demanded conditions for appropriate spoofing attack exists, satisfying the conditions is restricted in real environments. So, the Way-point of the UAV is assumed to be known for experiments and assessments. Under the circumstances, GPS spoofing signal is generated based on the Software-based GNSS signal generator. The signal is emitted to the target UAV using the antenna of the spoofer and the effect of the signal is analyzed and evaluated. In conclusion, taking the UAV to the target point is hardly feasible. To implement the spoofing as expectation, the position and guidance system of the UAV has to be known. Additionally, the GPS receiver on the UAV could be checked whether it appropriately tracks the spoofing signal or not. However, the effect of the spoofing signal on the autonomous UAV has been verified and assessed through the experimental results. Spoofing signal affects the navigation system of the UAV so that the UAV goes off course or shows an abnormal operation.

• Journal of Magnetics
• /
• 제17권4호
• /
• pp.298-301
• /
• 2012

In order to know the effect of surface irregularity in the detection of local wall thinning of pipeline using pulsed eddy current (PEC), the lift-off effects on PEC signal have been investigated. Three kinds of parameters in the PEC signal, which is "peak amplitude", "time to peak amplitude" and "time to zero crossing" are analyzed to separate the lift-off effects in the PEC signal. The distance from sensor to the bottom of sample which is the total thickness of combined insulator and sample is kept constant. The magnitude of the differential peak amplitude is increased with increasing sample thickness, the time to peak amplitude is increased with increasing the sample thickness. To determine the effect of lift-off, a number of balanced transient responses combining wall thinning locations and lift-off distances were plotted.

• International journal of advanced smart convergence
• /
• 제11권3호
• /
• pp.28-35
• /
• 2022

Interference always exists between wireless communication systems used in the same frequency band or adjacent frequency bands. In order to deploy a new wireless communication system such as a 5G system, a new frequency band must be allocated to the system. For this purpose, after analyzing interference between the existing system and the new system, a method of setting a frequency guard band or a minimum separation distance has been used as a passive method to limit the interference effect. This paper presents a wideband RF IRM(Interference Reduction Module) that can actively reduce the influence of interference between wireless communication systems. The wideband RF IRM can reduce the interference effects of 5G signals on satellite signals. The principle and structure of the wideband RF IRM are presented. The wideband RF IRM can suppress approximately 20dB of interference signal in 100MHz bandwidth when only interference signal exists. It also shows that when a 5G interference signal of -45dBm/100MHz and a satellite signal of -55dBm/40MHz exist simultaneously at a center frequency of 3.83GHz, about 15dB of 5G interference signal can be reduced in the frequency range covered by the satellite signal. The experimental results demonstrate that the wideband RF IRM can actively reduce the 5G interference signal on the satellite signal and can be used for the purpose of reducing the interference effect in a similar environment.

• Journal of Electrical Engineering and information Science
• /
• 제3권1호
• /
• pp.117-125
• /
• 1998

In this paper, in order to investigate the fading reduction effect of narrowband and broadband signals in an indoor multipath propagation environment, both the received narrowband signal while a vehicle unit in motion and the frequency sweeped broadband signal received by vertical polarized antenna, horizontal polarized antenna and circularly polarized antenna are analyzed. Specifically, in order to evaluate polarization diversity effect, we examined the difference of fading reduction effect between the polarization diversity reception and the space diversity reception. Using the correlation coefficient and correlation graph for the polarization diversity branches, the diversity effect is evaluated. And also, using the cumulative distribution for the received signal strength simulated by diversity reception, the diversity effect is also estimated. From the evaluation results it was found that the polarization diversity which use a circularly polarized antenna at the transmitting end and the vertical and horizontal polarized antenna branches at the receiving end is markedly excellent.

• Bulletin of the Korean Chemical Society
• /
• 제23권10호
• /
• pp.1389-1393
• /
• 2002

The non-spectroscopic interference effects that occurred in inductively coupled plasma/mass spectrometry were studied for Ge, As and Se in human urine and serum. Many biological samples contain Na, K, Cl and organic compounds, which may cause the enhancement and depression on the analyte signal. The effect of 1% concomitant elements such as N, Cl, S, P, C, Na, and K on a 100 ㎍/L germanium, arsenic and selenium signal has been investigated by ICP/MS. The interference effects were not in the same direction. It appeared that concomitant elements such as Cl, S, and C induce an enhancement effect, whereas N and P did not show any significant effect. And, Na and K caused a depression. We have found a link between the abundance of analytes and the ionization potential of concomitant elements (eV), except carbon and nitrogen.

• 한국정보통신학회논문지
• /
• 제6권8호
• /
• pp.1139-1145
• /
• 2002

웨이브렛 변환 데이터는 신호의 상세 정보를 포함하고 있으므로 주파수 대역별로 필터링할 수 있다. 따라서, 본 논문에서는 중요한 두 가지 잡음을 웨이브렛을 사용하여 제거하였다. AWGN 환경에 대해서 hard-threshold를 적용한 UDWT(undecimated discrete wavelet transform)를 사용하였으며, 임펄스 잡음환경에 대해서는 임계치에 의한 잡음 제거와 웨이브렛에 의한 신호의 slope를 이용하여, 잡음 제거 효과를 최대로 함과 동시에 원신호의 edge를 인식하도록 하였다. 이러한 잡음 제거 효과의 판단 기준으로 SNR을 사용하였으며, 테스트 신호로서 Blocks와 DTMF(dual tone multi frequency)를 사용하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 A
• /
• pp.395-397
• /
• 2001

A new automatic generation control (AGC) signal transmission format will be adopted in the new energy management system (EMS) that KEPCO is planning to install for managing and operating the power system efficiently under the deregulation environment. Therefore, it is necessary for the power plants to make the AGC processing logic fit the new AGC signal flow format. In this work, we compare the new signal transmission scheme with the conventional one in view of its effect to the signal flow in the distributed control systems (DCS) that ale equipped in power plants to handle AGC operation. Then we propose a basic logic configuration for DCS that can be used with the new signal format. In the design of the configuration, some practical issues that should be discussed for the proper operation of the plants are considered.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1254-1258
• /
• 2003

One of the major factors that effect sensor performance is analog noise that added in a sensor signal such as voltage. In multi-axis force sensors, error sources may be classified mainly in two groups. One is structural error due to inaccuracy of sensor body. The other error source is noise signals existing in the sensed information. This paper presents a brief review about the principle of multi-axis force sensors, and then proposes a method that can reduce the effect of noise signal to sensor performance. The method is to convert analog voltage signal to digital numbers near sensor body and then to read these digital signals and conduct signal processing in the computer. By this way, we can eliminate a bad effect of electromagnetic wave emitted from computer and of 60 Hz noise emitted from AC source. The proposed method is investigated through experimental demonstration. The experimental results show that it improves S/N ratio of the sensor about 40 times in our experimental setup.