• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.6
• /
• pp.116-126
• /
• 2008

This paper describes the Dual-band WLAN transmitter with 2.4[GHz], 5[GHz]. Dual-band WLAN transmitter was designed at 2.4[GHz] and 5[GHz]. The Dual-band WLAN transmitter has a amplifier which operate at 2.4[GHz] and 5[GHz] frequency and two VCO(Voltage Controlled Oscillator) or VCO has a wide scope of frequency. these problem cause a size and a power consumption, The Dual-band WLAN transmitter module was proposed to solve these. the transmitter was designed to get output signals of IEEE 802.11a's 5.8[GHz] band signal using frequency multiplication way or to act a amplifier about the 2.4[GHz] band signal of IEEE 802.11b/g, according to inputed frequency and bias voltage that a eve using single transmission block. The output spectrum get the improved specification of ACPR of 4[dB], 6[dB], 16[dB] at +11[MHz], +20[MHz], +30[MHz] offset of center frequency compared to no linearization, was satisfied to transmit spectrum mask of IEEE 802.11a wireless Lan.

• Journal of the Institute of Convergence Signal Processing
• /
• v.10 no.2
• /
• pp.106-111
• /
• 2009

Real-time video stabilization technology is used in correction for the camera vibrations of the hand-held camera by hand or fixed camera by external condition. This paper is about the counterplan to cope with the vibration of the movie generated by the large external cause relatively. we use the movie stabilization parameters with the phase correlation method based the DFT to get the displacements of the current frame to the reference frame. we use the kalman filter for the efficient and stable searching works on the phase correlation map and present the proper conditions for the real-time processing through the experiments. We propose the measure to evaluate the capability of the video stabilizer which is the standard deviation of the brightness of the center block. and compare the capability for the video sequences randomly shifted and the jittered video sequences obtained from camera.

• Journal of the Institute of Convergence Signal Processing
• /
• v.16 no.4
• /
• pp.129-133
• /
• 2015

In this paper, we propose a fast motion estimation algorithm which is important in the performance of video encoding. Conventional fast motion estimation algorithms have serious problems of low prediction quality in some frames and still much computation. In the paper, we propose an algorithm that reduces unnecessary computations only, while keeping prediction quality almost similar to that of the full search. The proposed algorithm uses distribution of probability of motion vectors, divides search range into several groups according to its importance, and applies adaptive block matching criteria for each group of search range. The proposed algorithm takes only 3~5% in computational amount and has decreased prediction quality about 0~0.01dB compared with the fast full search algorithm.

• Journal of the Institute of Convergence Signal Processing
• /
• v.12 no.2
• /
• pp.145-149
• /
• 2011

Recently, as the design of a system gets larger and more complex, functional verification method based on system-level becomes more important. The verification of a functional block mainly uses BFM(bus functional model). The larger the burden on functional verification is, the more the importance of configuring a proper verification environment increases rapidly. SystemVerilog unifies hardware design languages and verification languages in the form of extensions to the Veri log HDL. The processing of design description, function simulation and verification using same language has many advantages in system development. In this paper, we design DUT that is composed of AMBA bus and function blocks using SystemVerilog and verify the function of DUT in verification environment using layered testbench. Adaptive FIR filter and Booth's multiplier are chosen as function blocks. We confirm that verification environment can be reused through a minor adaptation of interface to verify functions of other DUT.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.153-156
• /
• 2009

The interferometric fiber optic gyroscopes (FOGs) are well known as sensors of rotation, which are based on Sagnac effect, and have been under development for a number of years to meet a wide range of performance requirements. This paper describes the development of open-loop FOG and digital signal processing techniques implemented on FPGA. Our primary goal was to obtain intermediate accuracy (pointing grade) with a good bias stability ($0.22^{\circ}/hr$) and scale factor stability, extremely low angle random walk ($0.07^{\circ}/\sqrt{hr}$) and significant cost savings by using a single mode fiber. A secondary goal is to design all digital FOG signal processing algorithms with which the SNR at the digital demodulator output is enhanced substantially due to processing gain. The CIC type of decimation block only requires adders and shift registers, low cost processors which has low computing power still can used in this all digital FOG processor.

• Journal of IKEEE
• /
• v.23 no.3
• /
• pp.934-940
• /
• 2019

In this paper, we propose a Reverse Differential Chaos Shift Keying (RE-DCSK) system for low cost, high reliability and high data rate non-coherent chaos communication .In RE-DCSK, reference signals are transmitted in the first slot as in the conventional differential chaos shift modulation scheme (DCSK) and in the second slot a time inversion block strengthens the autocorrelation of the chaos signal and uses the orthogonality of the two signals to obtain the information signal. RE-DCSK enables relatively double the data rate compared to DCSK and also improves the security of communications without any additional cost of system complexity.To prove its effectiveness, we analyze it through Rayleigh fading channel and additional white Gaussian noise (AWGN) channel based on the derived BER expression. The BER performance of the proposed system is improved when compared with the CDSK and DCSK system using AWGN channel.

• Journal of the Institute of Convergence Signal Processing
• /
• v.22 no.3
• /
• pp.110-115
• /
• 2021

With the era of the 4th Industrial Revolution, education on artificial intelligence is one of the important topics. However, since existing education is aimed at knowledge, it is not suitable for developing the active problem-solving ability and AI utilization ability required by artificial intelligence education. To solve this problem, we proposes PBL-based education method in which learners learn in the process of solving the presented problem. The problem presented to the learner is a completed project. This project consists of three types: a classification model, the training data of the classification model, and the block code to be executed according to the classified result. The project works, but each component is designed to perform a low level of operation. In order to solve this problem, the learners can expect to improve their computational thinking skills by finding problems in the project through testing, finding solutions through discussion, and improving to a higher level of operation.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.3
• /
• pp.1051-1077
• /
• 2021

The secure communication of information is a major concern over the internet. The information must be protected before transmitting over a communication channel to avoid security violations. In this paper, a new hybrid method called compressed encrypted data embedding (CEDE) is proposed. In CEDE, the secret information is first compressed with Lempel Ziv Welch (LZW) compression algorithm. Then, the compressed secret information is encrypted using the Advanced Encryption Standard (AES) symmetric block cipher. In the last step, the encrypted information is embedded into an image of size 512 × 512 pixels by using image steganography. In the steganographic technique, the compressed and encrypted secret data bits are divided into pairs of two bits and pixels of the cover image are also arranged in four pairs. The four pairs of secret data are compared with the respective four pairs of each cover pixel which leads to sixteen possibilities of matching in between secret data pairs and pairs of cover pixels. The least significant bits (LSBs) of current and imminent pixels are modified according to the matching case number. The proposed technique provides double-folded security and the results show that stego image carries a high capacity of secret data with adequate peak signal to noise ratio (PSNR) and lower mean square error (MSE) when compared with existing methods in the literature.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.1
• /
• pp.51-65
• /
• 2007

The purpose of this study is the development and application of a high resolution ultrasonic wave imaging system to detect discontinuity plane in lab-scale rock models. This technique is based on received time series which capture the multiple reflections at interface. This study includes the fundamental aspects of ultrasonic wave propagation in rock mass, the selection of the optimal ultrasonic wave transducer, data gathering, a signal processing, imaging methods, and experiments. Experiments are carried out by the horizontal movement and rotation devices. Experimental studies show the discontinuity is well detected by the horizontal movement and rotation devices under water. Furthermore, the discontinuity and the cavity on the plaster block are identified by the rotation device. This study suggests that the new method may be an economical and effective tool for the detection of the discontinuity on rock mass.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.6
• /
• pp.130-136
• /
• 2016

HEVC (High Efficiency Video Coding) extension considers screen content as one of its main candidate sources for encoding. Among the tools already included in HEVC version 1, the technique of using transform skip mode allows transform to be skipped and to perform quantization process only. It is known to improve video coding efficiency for screen contents which are characterized to have much high frequency energy. But encoding complexity increases since its encoder should decide whether transform should be used or not in each $4{\times}4$ transform block. Based on statistical correlation between IBC (Intra block copy) and transform skip modes both of which are known effective in screen contents, this paper proposes a combined method of the fast transform skip mode decision and a modified transform skip signaling which signals transform_skip_flag at CU level as a representative transform skip signal. By simulation, the proposed method is shown to reduce encoding time of $4{\times}4$ transform blocks by about 32%.