• Journal of Satellite, Information and Communications
• /
• v.9 no.2
• /
• pp.85-90
• /
• 2014

In this paper, we propose a novel UE(User Equipment) position tracking algorithm of visible light signals, and analyze BER performance when optical beamforming scheme is applied in VLC(Visible Light Communications) system. The optical beamforming scheme as an interference mitigation method provides good optical channel conditions between UE(Rx) and LED light(Tx), and lead to better BER performance because UE is able to get a better RSSI(Received Signal strength indication) value. For the system BER, the proposed UE position tracking method for optical beamforming transmission demonstrates the performance enhancement compared to a system not applied the optical beamforming transmission scheme, and up to about 5~6dB SNR performance gain is achieved. The results of the paper can be applied to design of various VLC and LBS applications for ubiquitous home network systems.

• Journal of Astronomy and Space Sciences
• /
• v.19 no.4
• /
• pp.377-384
• /
• 2002

We have developed Real-time Phase DAta processor(RPDAP) for GPS L1 carrie. And also, we tested the RPDAP's positioning accuracy compared with results of real time kinematic(RTK) positioning. While quality of the conventional L1 RTK positioning highly depend on receiving condition, the RPDAP can gives more stable positioning result because of different set of common GPS satellites, which searched by elevation mask angle and signal strength. In this paper, we demonstrated characteristics of the RPDAP compared with the L1 RTK technique. And we discussed several improvement ways to apply the RPDAP to precise real-time positioning using low-cost GPS receiver. With correcting the discussed weak points in new future, the RPDAP will be used in the field of precise real-time application, such as precise car navigation and precise personal location services.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.127-130
• /
• 2010

The reception quality of broadcasting in car radio system may become poor due to the noise such as week signal strength, multipath, Adjacent Channel and so on. To improve this, some european nations and U.S. serve RDS(Radio Data System) on FM radio. AF(Alternative Frequency) and PI(Programme Identification) code contained information in RDS data are used to switch to the broadcasting having the best reception quality. There are many techniques and studies of maintaining the best reception quality. But many previous techniques are no longer the best way because RF chips are improved every year and noise components can be distinguished in detail. So this research will suggest the best switching technique to maintain the best reception quality.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.5
• /
• pp.3440-3446
• /
• 2015

One of technologies that make it possible for users to enjoy always-on Internet service using potable devices does be Wifi. However, users frequently feel its connection is not stable or its speed becomes slow. On the other hand, users see multiple available Wifi access points exist often. In this paper, we present a smartphone application, called to WiSMax, that periodically changes its Wifi connection to the best one among available Wifi access points to maximize its speed. Experimental results show that WiSMax presents faster Internet connection than IEEE802.11 as much as about fifteen percent and higher signal strength than IEEE802.11 as much as about five dBm.

• The KIPS Transactions:PartC
• /
• v.18C no.3
• /
• pp.187-194
• /
• 2011

IEEE 802.11 wireless LAN has become the center of attention for one of the most dominant wireless networking technologies nowadays. In densely deployed wireless LANs, mobile stations are exposed to a number of AP, thus it is needed to select the best AP to associate with. The most common approach is to select the AP with the highest received signal strength. However it does not consider traffic load imposed to each AP so that it may cause the poor network performance. Therefore, in this paper, we propose a throughput estimation scheme for neighboring APs by sniffing the traffic within 802.11 networks. We devise a tool, named "VirtFrame", which is to estimate the station's capable throughput from neighbor APs based on the channel access time by virtually combining the sniffed frames. Simulation results show that our proposed scheme well matches that there exists correlation between the channel access time and the actual throughput of the APs.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.46 no.2
• /
• pp.173-183
• /
• 2010

In a split beam echo sounder, the transducer design needs to have minimal side lobes because the angular position and level of the side lobes establishes the usable signal level and phase angle limits for determining target strength. In order to suppress effectively the generation of unwanted side lobes in the directivity pattern of split beam transducer, the spacing and size of the transducer elements need to be controlled less than half of a wavelength. With this purpose, a 50 kHz tonpilz type transducer with a half-wavelength diameter in relation to the development of a split beam transducer was designed using the equivalent circuit model, and the underwater performance characteristics were measured and analyzed. From the in-air and in-water impedance responses, the measured value of the electro-acoustic conversion efficiency for the designed transducer was 51.6%. A maximum transmitting voltage response (TVR) value of 172.25dB re $1{\mu}Pa/V$ at 1m was achieved at 52.92kHz with a specially designed matching network and the quality factor was 10.3 with the transmitting bandwidth of 5.14kHz. A maximum receiving sensitivity (SRT) of -183.57dB re $1V/{\mu}Pa$ was measured at 51.45kHz and the receiving bandwidth at -3dB was 1.71kHz. These results suggest that the designed tonpilz type transducer can be effectively used in the development of a split beam transducer for a 50kHz fish sizing echo sounder.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.9
• /
• pp.4133-4137
• /
• 2011

Reliable Multi-Reader RFID identification is one of issues in Multi-Reader RFID realization program in recent. And the Multi-Reader RFID reader has difficulty to obtain reliable data in data capture layer. The reason is that unreliable readings such as a false positive reading and a false negative reading and missed readings can happen by reader collision problems, noise, or the mobility of tagged objects. We introduce performance metrics to solve these reader problems. We propose three solutions the Minimum Overlapped Read Zone (MORZ) with Received Signal Strength Indicator (RSSI), the Spatial-Temporal Division Access (STDA) method, and double bigger size of tags attached on the object. To show the improvement of the proposed methods, we calculate tag's successful read rates in a smart office, which consists of Multi-Reader RFID systems.

• Journal of Korea Multimedia Society
• /
• v.7 no.5
• /
• pp.680-688
• /
• 2004

In this paper, we propose a new handoff scheme which is efficient in hybrid mobile data network consists of cellular mobile network and wireless LAN. In this scheme, handoff is delayed until connections with wireless LAN and data rates are smoothly decreased according to becon signal strength of wireless LAN. By doing so, data transfer capacity is increased and required data buffer in handoff for mobile and network system can be decreased. We analyze new handoff scheme by computer simulation. The results show that 180Mbytes data can be transferred additionally in handoff processing and required buffer size can be decreased 1/2 with the conditions that mobile speed is 1Km/hr and the data rate of a original call is 2,048Kbps.

• Journal of Advanced Navigation Technology
• /
• v.14 no.6
• /
• pp.996-1001
• /
• 2010

In this paper, network selection algorithm for services of mobile IPTV(internet protocol television) and implementation of a hierarchical processing system for reducing overload by terminal with low speed is proposed. This algorithm selects the network according to the following priorities derived from formulas; value that uses remaining bandwidth, network cost, signal strength. If terminal has a low processing power for using selected network and TV service, quality of service declines due to the system overloading. Hence, we implemented system which processes selected network and TV services accomplished by layer divided. Through experiments results, the method of direct user network selection waits for bandwidth assignment. However, on the one hand, that waiting time in exhausted situation will be very long. On the other hand, if we consider the priority plot of used networks, we should select the network with the best state. Therefore, data transmission rate will keep on average and the waiting time will be low.

• Journal of KIISE:Information Networking
• /
• v.33 no.1
• /
• pp.49-58
• /
• 2006

When the movement of a node breaks the route in ad-hoc network, on-demand routing protocol performs the local route recovery or a new route search for the route maintenance. And when it performs the new route search or the local search, the packet which is transmitted can be delayed. There are ARMP and RPAODV as the methods reducing the delay resulted from the route-breakage. They predict the route-breakage and construct an alterative local route before the occurrence of the route-breakage. When the link state is unstable, the success rate of the alternative local route that can avoid the route-breakage can give a direct effect on the route-breakage and the transmission delay, To estimate the performance of routing protocols avoiding route-breakage, we suggest the numerical formulas of AODV, the representative on-demand routing protocol, and ARMP, RPAODV. To verify the efficiency and accuracy of the proposed numerical formulas, we analysis and compare with the results of the computer simulation and that of the numerical formulas.