• 조명전기설비학회논문지
• /
• 제13권1호
• /
• pp.21-30
• /
• 1999

전력용 변압기의 절연 열화를 탐지하기 위한 연구가 오래 전부터 연구되어 왔으며 절연유에 함유된 연소성 가스분석 기술이 주로 활용되고 있다. 최근들어 고압 대용량화에따른 사고 파급효과가 커지게 되면서 on-line 탐지시스템의 필요성이 대두되면서 부분방전 신호 검출법이 연구되기 시작하였다. 본 연구는 부분방전 신호 검출법 중에서 탐촉자의 탈착이 용이한 초음파 신호 측정법에서 가장 큰 문제점인 잡음신호 분리를 위한 연구이다. 신호원의 개수와 위치를 측정할 수 있으므로 측정된 초음파 신호가 부분방전에 의한 것인지 외부 잡음인지를 구별할 수 있으며 변압기의 절연열화 판단에 한층 신뢰성을 향상시킬 수 있게 되었다.

• International Journal of Advanced Culture Technology
• /
• 제2권2호
• /
• pp.15-18
• /
• 2014

This paper presents a sensor location decision making method respect to Container-Grown Seedlings in view of precision agriculture (PA) when sensors involved in tree container measure received signal strength (RSS) or time-of-arrival (TOA) between themselves and neighboring sensors. A small fraction of sensors in the container-grown seedlings system have a known location, whereas the remaining locations must be estimated. We derive Rao-Cramer bounds and maximum-likelihood estimators under Gaussian and log-normal models for the TOA and RSS measurements, respectively.

• 대한전기학회논문지
• /
• 제45권2호
• /
• pp.167-174
• /
• 1996

In this paper, a fault location algorithm is presented, which uses novel signal processing techniques and takes a new paradigm to overcome some drawbacks of the conventional methods. This new method for fault location on electric power transmission lines uses only one-terminal fault signals. The main feature of the method is hat it uses the high frequency components in fault signal and considers the influence of the source network by using a traveling wave propagation characteristics. As a result, we can develop a high speed, good accuracy fault locator.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.369-375
• /
• 2002

The results of source location in terms of AE signal occurred by the spot exciting as suggested in this research, it has been confirmed that AE technique is quite fruitful in figuring out the location of the occurrence, form, size and direction of the defects. Thus, it is expected that the application of the experimental method suggested in this study would make it possible to identify, in the nondestructive way, the location of the defect in the material.

• 전기학회논문지
• /
• 제56권12호
• /
• pp.2184-2188
• /
• 2007

We developed a novel method of partial discharge(PD) location based on the fact that the waveform of PD signal propagate along the GIB (Gas Insulated Bus) is composed of several modes of electromagnetic wave with different group velocities and cut-off frequencies. From the PD waveform, measured at a broadband PD sensor attached on the GIB, we could derive arrival time and frequency components of different modes using the short term Fourier transform or etc. After the group velocities of different modes are calculated, the location of the PD source could be estimated. To show the effectiveness of this new locating method in a real on site application, we used this method to locate the position of a PD source at a 76 m long 345 kV GIB substation. The estimated location of the PD source using the method proposed above was in good agreement with the actual location found from the inspection result of internal component in the GIB with 2.4% of the estimation error.

• 전기학회논문지
• /
• 제63권12호
• /
• pp.1683-1689
• /
• 2014

In this paper, we propose an image processing based time-frequency domain reflectometry(TFDR) in order to estimate the fault location of a cable. The Wigner-Ville distribution is used for analysis in both the time domain and the frequency domain when the conventional TFDR estimates the fault location in a cable. However, the Winger-Ville distribution is a bi-linear function, and hence the cross-term is occurred. The conventional TFDR cannot estimate the accurate fault location due to the cross-term in case the fault location is close to the position where the reference signal is applied to the cable. The proposed method can reduce the cross-term effectively using binarization and morphological image processing, and can estimate the fault location more accurately using the template matching based cross correlation compared to the conventional TFDR. To prove the performance of the proposed method, the actual experiments are carried out in some cases.

• Journal of Electrical Engineering and Technology
• /
• 제7권6호
• /
• pp.859-868
• /
• 2012

A new fault location algorithm based on stationary wavelet transform and its verification experiment results are described for HVDC submarine cables in this paper. For wavelet based fault location algorithm, firstly, 4th level approximation coefficients decomposed by wavelet transform function are superimposed by correlation, then the distance to the fault point is calculated by time delay between the first incident signal and the second reflected signal. For the verification of this algorithm, the real experiments based on various fault conditions and return types of fault current are performed at HVDC submarine cable test yard located in KEPCO(Korea Electric Power Corporation) Power Testing Center of South Korea. It proves that the fault location method proposed in this paper is very simple but very quick and accurate for HVDC submarine cable fault location.

• 한국정보과학회논문지:정보통신
• /
• 제36권4호
• /
• pp.330-338
• /
• 2009

유비쿼터스 컴퓨팅 시대로 진입하면서 사물의 위치 정보를 기반으로 다양한 응용이 개발되고 있다. 무선 센서 네트워크는 저전력, 저가, 배치의 용이성 등이 주된 특징으로서 실내 위치 인식 시스템에 적합하다. 크리켓과 같은 실내 위치 인식 시스템에서는 노드간의 거리를 인식하기 위해서 초음파 신호와, 라디오 신호를 주기적으로 전송한다. 하지만 배치되는 센서 노드의 수가 증가할수록 신호간의 간섭 및 충돌 횟수가 증가하여 위치 인식 시스템의 정확도가 저하된다. 본 논문에서는 On-demand 비콘 관리 기법을 제안하여 리스너와 물리적으로 근접한 비콘 노드가 비콘 신호를 전송하여 간섭 및 충돌 현상을 최소화 시키고, 초음파 신호의 특성으로 인한 오차율을 감소시키는 알고리즘을 제안한다.

• 한국산학기술학회논문지
• /
• 제9권4호
• /
• pp.952-957
• /
• 2008

최근 무선 통신 기술의 발달은 장비를 간편화 하고 편리화 시키게 되었다. 또한 다양한 서비스를 창출 할 수 있는 기반이 마련하였다. 하지만 무선 랜의 다양한 서비스와 접속성의 확대는 보안의 취약점을 야기 시켰다. 본 논문에서는 IEEE802.11 무선 랜 서비스를 통하여 PDA 상에서 AP의 정보를 받아 무선 랜 보안 서비스의 특성과 취약성을 살펴보고 PDA 기반 위치 추적 시스템을 구현을 하였다.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 후기학술대회논문집
• /
• pp.158-159
• /
• 2005

The paper presents a method for location of subsurface UXOs. The approach utilities gradient interpretation techniques (analytic signal, horizontal gradient and Euler methods) to locate the objects. Then, linear least-squares technique, we obtain the magnetization location of the sources. We demonstrate the practical utility of the method using marine magnetic field data.