• ETRI Journal
• /
• v.45 no.5
• /
• pp.899-909
• /
• 2023

In mobile communication, the most exploratory technology of fifth generation is massive multiple input multiple output (MIMO). The minimum mean square error and zero forcing based linear detectors are used in multiuser detection for MIMO single-carrier frequency division multiple access (SCFDMA). When the received signal is detected and regularization sequence is joined in the equalization of spectral null amplification, these schemes experience an error performance and the signal detection assesses an inversion of a matrix computation that grows into complexity. Ordered successive interference cancelation (OSIC) detection is considered for MIMO SC-FDMA, which uses a posteriori information to eradicate these problems in a realistic environment. To cancel the interference, sorting is preferred based on signal-to-noise ratio and log-likelihood ratio. The distinctiveness of the methodology is to predict the symbol with the lowest error probability. The proposed work is compared with the existing methods, and simulation results prove that the defined algorithm outperforms conventional detection methods and accomplishes better performance with lower complication.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.1
• /
• pp.168-186
• /
• 2016

In this paper, we investigate the degrees of freedom (DoF) of a two-cluster multiple-input multiple-output (MIMO) multiway relay interference channel (mRIC), where there are two relays and two users per cluster. In this channel, users within the same cluster exchange messages among themselves with the help of two relays.We first obtain the DoF upper bound of the considered MIMO mRIC based on cut-set bound. Then, we propose a novel transmission strategy, blind interference neutralization (BIN), to approach the DoF upper bound. This new method utilizes the overheard information at two relays and focuses on the beamforming matrix designs at two relays so that the channel state information (CSI) at users is not required. Through theoretical analysis and numerical simulations, we show that the DoF upper bound can be obtained by using the BIN scheme. From simulation results, we show that the proposed BIN scheme can provide significant performance gain over the conventional time division multiple access (TDMA) scheme in terms of DoF. In addition, we show that the BIN scheme is a superior approach to the existing signal space alignment (SSA) schemes for the considered mRIC.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.10 s.352
• /
• pp.55-59
• /
• 2006

In cellular OFDMA(Orthogonal Frequency Division Multiple Access) systems, each subcarrier may suffer from different amount of interferences from neighbor cells. Suppose that it is possible to accurately estimate inter-cell interferences for each subcarrier, the performance can be considerably improved by applying SINR(Signal to Interference and Noise Ratio) weighting. This paper proposes an inter-cell interference estimation method for cellular OFDMA systems. The proposed method extracts amounts of noise and interferencesby eliminating the channel variation effects of pilot symbols caused by frequency offset, timing offset mobile velocity, and delay spread.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.3
• /
• pp.289-293
• /
• 2013

In the noncoherent methods for UWB-IR (ultra-wideband impulse radio), block coded modulation (BCM) is better than the transmitted reference (TR) systems in terms of the energy efficiency and data rate. However, even BCM suffers from the performance degradation in the presence of strong inter-frame interference and inter symbol interference. We propose the transmitted reference based on the BCM (TR-BCM) which is the hybrid system of TR and BCM. Performance evaluation shows that the performance of TR-BCM is better than that of BCM in the high SNR range.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.1
• /
• pp.40-47
• /
• 2013

By virtue of Rec. ITU-R P.1546 and geography information system, interference analysis for the fixed wireless system and radar has been presented based upon the frequency-distance rules with minimum coupling loss, and a comprehensive methodology for assessing interoperability between systems was examined in terms of received signal, protection ratio, frequency dependent rejection. Also to find the antenna gain from a discrimination angle, a useful S-I plane was introduced based on signal and interference vectors derived from the real map with geographic information. To show some computational results, geography information on the map was taken for the given area, and field strength and path profile were illustrated for the radar and fixed wireless system operating at 2.7 GHz, for convenience. In addition the interference effect of receiver was also checked as a function of radar beam direction including protection ratio and frequency dependent rejection. The developed interference analysis can be actually applied to evaluate interoperability for wireless systems in the VHF and UHF bands.

• KIPS Transactions on Computer and Communication Systems
• /
• v.5 no.5
• /
• pp.103-108
• /
• 2016

In this paper, we propose a resource allocation scheme that guarantees transmission rate for each mobile stations by mitigating interference between a base station-to-mobile station link and a relay station-to-mobile station link. Specifically, we dynamically adjust the boundary between access zone and relay zone using signal to interference plus noise ratio. Moreover, we cluster the mobile stations under sever interference and manage the channel quality of these mobile stations by allocating additional radio resource. Our simulation results show that the proposed scheme can improve the efficiency of radio resources and ensure fairness among mobile stations.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.3
• /
• pp.945-964
• /
• 2014

In this paper, we investigate the performance of Signal to Leakage and Noise Radio (SLNR) based user scheduling in uplink of multi-cell with large-scale antenna system. Large antenna array is desired to improve the performance in future system by providing better beamforming capability. However, some studies have found that the signal channel is 'hardened' (becomes invariant) when the antenna number goes extremely large, which implies that the signal channel aware user scheduling may have no gain at all. With the mathematic tool of order statistics, we analyzed the signal and interference terms of SLNR in a homogeneous multicell network. The derived distribution function of signal and interference shows that the leakage channel's variance is much more influential than the signal channel's variance in large-scale antenna regime. So even though the signal channel is hardened, the SLNR-based scheduling can achieve remarkable multiuser diversity (MUD) gain due to the fluctuation of the uplink leakage channel. By providing the final SINR distribution, we verify that the SLNR-based scheduling can leverage MUD in a better way than the signal channel based scheduling. The Monte Carlo simulations show that the throughput gain of SLNR-based scheduling over signal channel based scheduling is significant.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.10A
• /
• pp.969-979
• /
• 2002

This paper proposes an novel method of minimizing Interference which causes data decision error in digital wireless communications. In this method, in order to suppress ISI which is caused by the phase difference between the transmitted and received signal phases, the transmitted and received signals are always kept orthogonal by compensating the transmitted signal for detecting the phase noise and the delay of the received signal was implemented by MOS circuits. To delay the phase of the signal, additive white Gaussian noise (AWGN) environment was used. The phase and delay of the signal transmitted through AWGN channel were compensated in the modulator of the transmitter and the compensated signal was demodulated using quasi-direct conversion receiver and QPSK demodulator. ISI suppression was achieved by keeping the orthogonality between the compensated transmitted signal and the receive signal. The error probability of data decision was compared. By simulation the proposed system was proved to be effective in minimizing the ISI.

• International journal of advanced smart convergence
• /
• v.9 no.1
• /
• pp.177-184
• /
• 2020

In this paper, we studied to direction of arrival (DoA) estimation to use DoA and optimum weight algorithms in coherent interference channels. The DoA algorithm have been considerable attention in signal processing with coherent signals and a limited number of snapshots in a noise and an interference environment. This paper is a proposed method for the desired signal estimation using MUSIC algorithm and adaptive beamforming to compare classical subspace techniques. Also, the proposed method is combined the updated weight value with LCMV beamforming algorithm in adaptive antenna array system for direction of arrival estimation of desired signal. The proposed algorithm can be used with combination to MUSIC algorithm, linearly constrained minimum variance beamforming (LCMV) and the weight value method to accurately desired signal estimation. Through simulation, we compare the proposed method with classical direction of in order to desired signals estimation. We show that the propose method has achieved good resolution performance better that classical direction arrival estimation algorithm. The simulation results show the effectiveness of the proposed method.

• Journal of Positioning, Navigation, and Timing
• /
• v.10 no.4
• /
• pp.341-351
• /
• 2021

In this paper, a GNSS error generation simulator for Signal Quality Monitoring (SQM) is implemented by using Matlab based on mathematical models derived from the effect of GNSS signal and measurement errors. The GNSS signal measurement errors of interest in this paper include three cases such as Evil Wave Form (EWF), Multipath (MP) and Radio Frequency Interference (RFI). In order to verify the validity of the generated measurement errors, a simple form of metrics for detecting and monitoring GNSS errors is included in the simulator. The GNSS errors generated by the simulator are added to the GNSS measurement data from commercial GNSS receiver in real time, and then, the SQM is tested for various scenarios of each case configured by scenario setting of the user.