• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.138-142
• /
• 2006

Time Difference of Arrival (TDOA) algorithm was applied to sound source positioning. Using measured microphones signal, difference of distance from source to sensors were estimated by TDOA and speed of sound, and taken by navigational measurements. And iteration procedures were induced to find the actual source location. For the case of stationary and moving sound source, validation test were performed in the anechoic room. In the stationary case, the error of positioning is less then 1.3% in length scale, and it could be seen proper filtering processes were required in the application of moving sound source.

• 정보저장시스템학회:학술대회논문집
• /
• 2005.10a
• /
• pp.12-13
• /
• 2005

Near field recording (NFR) technology with SIL has been thought as the most promising generation optical storage device. A gap distance between the SIL and the disc should be controlled to be 20${\~}$40nm. We observed gap error signal in our NFR test-bed using a blue LD (405nm). The digital gap servo filter and control algorithm were developed to maintain a constant air gap by adopting a conventional actuator.

• ETRI Journal
• /
• v.37 no.6
• /
• pp.1055-1064
• /
• 2015

We demonstrate a next-generation high-capacity mobile fronthaul based on radio over fiber (RoF) technology, which links between a digital unit and a radio unit supporting two frequency assignments and $2{\times}2$ multiple input, multiple output antennas. To confirm the technical feasibility of a mobile fronthaul, we experimentally investigate its down- and uplink end-to-end performances including the optical and radio frequency (RF) signal path. Frequency-dependent performance deviations, error vector magnitude variations, overall system performance variations caused by optical to electrical conversion, and intermediate frequency to RF conversions are examined. Experimental verifications on multiple LTE uplink signals are performed for the first time. We also demonstrate several commercial mobile Internet services, YouTube video streaming, and file transfers using off-the-shelf mobile devices, through a mobile fronthaul based on RoF.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.9
• /
• pp.2961-2975
• /
• 2022

The Location-Based Service (LBS) is one of the most well-known services on the Internet. Positioning is the primary association with LBS services. This study proposes an intelligent LoRa-based positioning system, called AI@LBS, to provide accurate location data. The fingerprint mechanism with the clustering algorithm in unsupervised learning filters out signal noise and improves computing stability and accuracy. In this study, data noise is filtered using the DBSCAN (Density-Based Spatial Clustering of Applications with Noise) algorithm, increasing the positioning accuracy from 95.37% to 97.38%. The problem of data imbalance is addressed using the SMOTE (Synthetic Minority Over-sampling Technique) technique, increasing the positioning accuracy from 97.38% to 99.17%. A field test in the NTUST campus (www.ntust.edu.tw) revealed that AI@LBS system can reduce average distance error to 0.48m.

• Journal of Positioning, Navigation, and Timing
• /
• v.13 no.1
• /
• pp.25-34
• /
• 2024

The Satellite Based Augmentation System (SBAS) improves the accuracy and reliability of user positioning by transmitting the error correction and integrity information of the global navigation satellite system signal from geostationary satellites in real time. For this reason, SBAS was designed for aircraft operations and approach procedures and is now in operational or development stages in many countries. Time has passed since the construction of SBAS and many changes have occurred in the composition of the monitoring stations and the geostationary satellites. These changes have been investigated and the current operation and development status of SBAS globally are surveyed. The development and test schedules for the transition to dual frequency multi-constellation, an important topic in SBAS, are discussed.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.3
• /
• pp.26-34
• /
• 1999

A new silicon-based IC interconnect transmission line parameter extraction methodology is presented and experimentally examined. Unlike the PCB or MCM interconnects, a dominant energy propagation mode in the silicon-based IC interconnects is not quasi-TEM but slow wave mode(SWM). The transmission line parameters are extracted taking the silicon substrate effect (i.e., slow wave mode) into account. The capacitances are calculated considering silicon substrate surface as a ground. Whereas the inductances are calculated by using an effective dielectric constant. In order to verify the proposed method, test patterns were designed. Experimental data have agreement within 10%. Further, crosstalk noise simulation shows excellent agreements with the measurements which are performed with high-speed time domain measurement ( i.e., TDR/TDT measurements) for test pattern, while RC model or RLC model without silicon substrate effect show about 20~25% underestimation error.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.2
• /
• pp.186-192
• /
• 2011

In this paper, we propose a new procedure for improvement of the linear predictive coding. To reduce the error power incurred by the coding, we interchanged the order of the two procedures of windowing on the signal and linear prediction. This scheme corresponds to LPC extraction with windowed autocorrelation. The proposed method requires more calculational time because it necessitates matrix inversion on more parameters than the conventional technique where an efficient Levinson-Durbin recursive procedure is applicable with smaller parameters. Experimental test over various speech phonemes showed, however, that our procedure yields about 5 % less power distortion compared to the conventional technique. Consequently, the proposed method in this paper is thought to be preferable to the conventional technique as far as the fidelity is concerned. In a separate study of speaker-dependent speech recognition test for 50 isolated words pronounced by 40 people, our approach yielded better performance too.

• Journal of Internet Computing and Services
• /
• v.14 no.6
• /
• pp.9-18
• /
• 2013

In this paper, we design and implement an intelligent system for finding objects with RFID(Radio Frequency IDentification) tag in which an mobile robot can do. The system we developed is a learning system of artificial neural network that uses RSSI(Received Signal Strength Indicator) value as input and absolute coordination value as target. Although a passive RFID is used for location estimation, we consider an active RFID for expansion of recognition distance. We design the proposed system and construct the environment for indoor location estimation. The designed system is implemented with software and the result related learning is shown at test bed. We show various experiment results with similar environment of real one from earning data generation to real time location estimation. The accuracy of location estimation is verified by simulating the proposed method with allowable error. We prepare local test bed for indoor experiments and build a mobile robot that can find the objects user want.

• Journal of IKEEE
• /
• v.22 no.3
• /
• pp.619-623
• /
• 2018

Due to the development of society, the demand for electric power has increased and the quality control of electric power has become an important issue. In order to efficiently perform such power management, we propose a DSP based power measurement system for multi-wire power measurement. Since the conventional power measurement system can measure only the power of one line, a power quality measurement device is required for each line in order to measure the power quality of the individual line. Respectively. The system proposed in this paper proposes a system capable of real-time measurement of power quality at up to 12 points using digital signal processing algorithm, and the prototype based on this system was evaluated through the official test report of Korea Electrotechnology Research Institute. As a result of the performance test, it was evaluated that the error range is excellent at ${\pm}0.3%$.

• Journal of Korean Society of Transportation
• /
• v.25 no.5
• /
• pp.33-42
• /
• 2007

The current left-turn split model adopted in COSMOS has an inherent limitation when a loop detector in the left-turn lanes was disconnected for a period of time. In this instance, the current model always allocated minimum green time to the left-turn phase, thus optimal split and efficient signal operation for the intersection was not guaranteed. In this paper, four mathmatical models using detector information of the intersection and four empirical models using historical profiles were developed and investigated for different traffic conditions to improve the operational efficiency of the intersection. From the model evaluation test, the empirical model using a four-week historical profile produced the least error among the eight models investigated. NETSIM simulation test results also showed that the proposed model could give significantly reduced delay time as compared to the current model. From these results, the operational efficency of the signalized intersections under the real-time control can be greatly improved by using the model proposed in case of the left-turn detector failure.