• 제목/요약/키워드: Signal Conversion

검색결과 705건 처리시간 0.023초

고출력 위협신호 모의장치 개발 및 추적레이다 연동 (Development of High power Threat Signal Simulator and Interfacing Tracking Radar)

  • 곽용길
    • 한국항행학회논문지
    • /
    • 제26권2호
    • /
    • pp.85-90
    • /
    • 2022
  • 본 연구에서는 항공기 체계의 성능을 시험하기 위해 시험 대상 항공기에 실제 위협과 유사한 신호를 고출력으로 송신할 수 있는 위협신호 모의 장치를 설계하였다. 고출력 위협신호 모의장치는 광대역(UHF대역, L대역, S대역, X 대역)의 통신신호, 레이다 신호를 송신하는 것이 가능해야 하며, 추적 레이다와 연동을 통해 항공기에 정확하게 지향하여 신호를 송신하는 제어시스템이 필요하다. 개발된 장비의 신호의 세기는 신호의 종류에 따라서 63 dBm, 93 dBm이상이며, 추적 정밀도는 0.1°이하로 요구되는 전기적/기계적 성능을 모두 만족함을 확인하였고, 추적 레이다 연동을 통해 고출력 위협신호 모의장치의 안테나가 항공기 위치로 신호를 정확하게 지향할 수 있음을 확인하였다.

반도체 광증폭기로 형성된 방향성 결합기에서의 파장변환 특성 모델링 (Modeling of Wavelength Conversion Charateristics in Directionally Coupled Semiconductor Optical Amplifier)

  • 정호연;정영철
    • 대한전자공학회논문지SD
    • /
    • 제38권8호
    • /
    • pp.43-53
    • /
    • 2001
  • 파장변환 소자는 최근에 급격히 발전하는 광네트웍을 구축하기 위한 필수적인 소자로서 여러 가지 형태에 대한 연구개발이 진행되고 있다. 그 중에서도, 최근에는 광증폭기로 형성된 방향성 결합기 구조에서의 상호위상변조(XPM: Cross Phase Modulation)에 의한 파장변환에 대한 개념이 제안되고 가능성이 실험적으로 입증된 바 있다. 본 논문에서는 연산자 분리 방법을 적용하여 상술한 파장변환기를 해석하기에 적당하도록 시영역 동적 모델을 구현하고, 파장변환 특성을 여러 가지 면에서 분석하여 보았다. 모델링 결과는 다른 연구자의 실험 결과를 잘 설명할 수 있음을 보였으며, 실험에서 제세되지 않았던 신호공과 변환된 광파가 역방향으로 진행하는 경우의 파장변환 특성 등에 대해서도 이 파장변환기가 잘 동작함을 보였다. 주파수 처핑의 경우 광펄스의 시작과 끝점 모두에게 정처핑과 부처핑이 동시에 발생함을 보았다.

  • PDF

주파수 상향변환 검출기를 이용한 1.5 ㎛ 통신파장대역의 단일광자 측정 (Single-photon Detection at 1.5 ㎛ Telecommunication Wavelengths Using a Frequency up-conversion Detector)

  • 김헌오;윤천주;조석범;김용수
    • 한국광학회지
    • /
    • 제22권5호
    • /
    • pp.223-229
    • /
    • 2011
  • 1.5 ${\mu}m$ 통신파장 대역 단일광자의 효율적인 측정을 위해서 PPLN WG(periodically poled $LiNbO_3$ waveguide)에서 준위상정합을 이용한 합주파수 생성에 의한 주파수 상향변환 검출기를 구성하고 검출 효율, 잡음 계수 및 타이밍 지터를 측정하였다. 974 nm에서 발진하는 펌프광의 세기가 300 mW일 때 최대 검출효율이 약 7%, 잡음 계수율은 약 480 kHz로 측정되었다. 피코초펄스 레이저를 이용한 자발적 매개하향변환에서 발생한 펄스형 단일광자 신호를 이용하여 측정된 주파수 상향변환 검출기의 최소 타이밍 지터는 약 39.1 ps였다. 또한 아주 좁은 동시계수 시간 폭으로 펄스형의 주파수 상향변환된 단일광자를 측정하면 잡음의 효과를 최소화할 수 있고, 신호대 잡음비의 특성을 최대로 높일 수 있다.

직접 변환을 이용한 고속 상관형 벡터 방향탐지기 (The Fast Correlative Vector Direction Finder Conversion)

  • 박철순;김대영
    • 대한전자공학회논문지TC
    • /
    • 제43권12호
    • /
    • pp.16-23
    • /
    • 2006
  • 본 논문은 msec.이하의 짧은 펄스형 신호를 탐지하기 위해 RF 하향변환기에서 직접 변환 방식을 수행하고, 방위 추정에 CVDF (Correlation Vector Direction Finding) 기법을 사용하는 고속 방향탐지기의 개발에 관한 것이다. 선정된 5-채널 등간격 원형 배열구조에서 방향탐지기의 구성 및 특징을 간단히 기술하고 고속 신호수신을 위해 직접 변환을 아날로그 I/Q 복조기에 적용하여 동조시간을 제거하는 기술을 설명한다. 또한 상기 모델에 대한 CRLB(Cramer-Rao Lower Bound)를 유도하고, 2종의 상관형 백터 방향탐지 기법인 LSE 기반 및 상관계수형 알고리즘의 원리를 기술하고 SNR, 샘플수, 이격거리비 변화에 따른 성능을 비교하여 그 특징을 살펴본다. 직접 변환 기법을 사용한 RF 하향변환기 프로토타입을 제작하고, 2종의 상관형 백터 방향탐지 기법을 적용하여 그 성능을 분석하였다 분석 결과, 모호성 발생에 대한 내성은 상관계수형 알고리즘이 양호한 반면, 나머지 조건에서 LSE 기반 알고리즘이 우수한 것으로 조사되었고, 이 결과는 시뮬레이션 결과와 일치하는 것을 확인하였다.

초고속 광파이버 전송시스템에서 색분산에 의한 전송거리 제한에 관한 연구 (A Study on the Transmission Length Limitation by Chromatic Dispersion in High Speed FOT스s)

  • 정은숙;김재평;정진호;김영권
    • 한국전자파학회지:전자파기술
    • /
    • 제4권3호
    • /
    • pp.18-29
    • /
    • 1993
  • 장거리 초고속 단일모드 광파이버 전송 시스템에서, 색분산은 복조된 파형의 찌그러짐을 생기게 하며, 그 결과 수신된 신호 간 간섭을 일으켜 전송 시스템의 성능을 저하시킨다. 본 논문에서는 강도변조-직접검파 시스 댐의 색분산제한을위상변조에서 진폭변조로의 전환잡음의 영향을고려함으로서 연구하였다. 파이버 색분산에 의한 위상-진폭으로의 전환잡음을 잡음전력 스펙트럼 밀도를 유도함으로서 분석하였으며 위상-진폭 전환잡음을 피하기 위한 시스댐 전력손실과 레이저 선폭에 대한 요구조건을 수치해석을 통하여 구하였다.

  • PDF

동일한 움직임 벡터들의 방향과 크기를 고려한 프레임율 증가기법 (Frame Rate Up-Conversion Considering The Direction and Magnitude of Identical Motion Vectors)

  • 박종근;정제창
    • 방송공학회논문지
    • /
    • 제20권6호
    • /
    • pp.880-887
    • /
    • 2015
  • 본 논문은 EBME(Extended Bilateral Motion Estimation) 알고리듬에서 동일한 움직임 벡터들의 방향과 크기를 고려한 알고리듬을 제안하였다. EBME는 BME(Bilateral Motion Estimation)보다 높은 연산량을 요구하기 때문에 프레임 내의 x, y방향 각각의 평균 움직임 벡터크기를 이용하여 동적프레임과 정적프레임을 판단하고, EBME 수행여부를 판단하여 연산량을 줄인다. 또한 동일한 움직임 벡터들의 방향과 크기를 비교하여 MVS(Motion Vector Smoothing)단계 수행여부를 판단함으로써 연산량을 줄인다. 제안하는 알고리듬을 적용한 실험 결과 기존의 EBME 알고리듬에 비해 수행시간은 단축되고 PSNR(Peak Signal to Noise Ratio)은 향상 되었다.

Analysis of Detuning-filter-assisted All-optical Wavelength Conversion Based on a Semiconductor Optical Amplifier with Strong Wavelength Dependence of Gain and Phase

  • Qin, Cui;Zhao, Jing;Yu, Huilong;Zhang, Jian
    • Current Optics and Photonics
    • /
    • 제1권6호
    • /
    • pp.579-586
    • /
    • 2017
  • In this paper, we theoretically demonstrate that semiconductor optical amplifiers (SOAs) with strong wavelength dependence of gain and phase are capable of all-optical inverted and non-inverted wavelength conversion (WC) over a wide range, with the assistance of an optical filter. First, the gain dynamics and phase dynamics in a common quantum well (QW) SOA with the $In_{0.53}Ga_{0.47}As/In_{0.7322}Ga_{0.2678}As_{0.5810}P_{0.4190}$ material system are found to be strongly dependent on wavelength, which is mainly related to the wavelength dependence of the differential gain and the differential refractive-index change. Second, the wavelength dependence in an all-optical wavelength converter based on the QW SOA cascaded with a detuning band pass filter is studied. Simulations show that the quality of the converted signal has little dependence on the operation wavelength. Both inverted and non-inverted WC can be achieved, over a large wavelength range. Therefore, although the gain and phase change are strongly wavelength-dependent, the effects of this dependence can be erased by appropriate optical filtering.

DSP 임베디드 숫자-점자 변환 영상처리 알고리즘의 구현 (Implementation of DSP Embedded Number-Braille Conversion Algorithm based on Image Processing)

  • 채진영;우다라;김원호
    • 한국위성정보통신학회논문지
    • /
    • 제11권2호
    • /
    • pp.14-17
    • /
    • 2016
  • 본 논문은 시각 장애인들을 위해 영상처리 기반의 숫자-자동 점자 변환기의 설계 및 구현에 관한 내용을 기술한다. 영상처리 기반의 숫자-점자 변환 알고리즘은 카메라로 획득한 입력 영상을 이진 영상화 한 다음, 문자 영역을 팽창과 라벨링 연산을 수행하고 저장되어 있는 문자 패턴 영상과 상호 상관도를 계산하여 해당되는 점자로 변환한다. 컴퓨터 시뮬레이션을 통하여 제안한 알고리즘을 모의실험한 결과, A4 용지에 인쇄된 숫자(0-9)에 대하여 91.8% 변환 성공률을 보여 주었고, DSP 영상처리 보드에 구현한 시제품 시험을 통하여 90% 변환 성능을 확인함으로서 구현된 숫자-자동 점자 변환기의 실용화 가능성을 확인하였다.

Research on Fourth Harmonic Mixer at W Band in the Imaging System

  • Xiang, Bo;Dou, Wenbin;He, Minmin;Wang, Zongxin
    • Journal of electromagnetic engineering and science
    • /
    • 제10권4호
    • /
    • pp.316-321
    • /
    • 2010
  • This paper presents a novel fourth harmonic mixer with new structure. The traditional 3-ports fourth harmonic mixer and the novel fourth harmonic mixer are designed by ADS, HFSS and CST simulator. The mixers have been fabricated and tested. The size of the traditional 3-ports fourth harmonic mixer is $12{\times}15$ mm, and the best conversion loss is 18.7 dB according to the measurement. Since the traditional 3-port mixer size is too large to be ranked, we design a novel fourth harmonic mixer for imaging system. The width of the mixing module in the novel fourth harmonic mixer is only 3.65 mm, and this size is fully capable to meet the mixer unit space which is not greater than 5 mm. The simulation result shows that the mixer has good performance, and the experiment result shows that the best conversion loss of the novel fourth harmonic mixer is 16.3 dB at RF signal of 91.3 GHz.

Study on DC-Offset Cancellation in a Direct Conversion Receiver

  • 박홍원
    • 천문학회보
    • /
    • 제37권2호
    • /
    • pp.157.2-157.2
    • /
    • 2012
  • Direct-conversion receivers often suffer from a DC-offset that is a by-product of the direct conversion process to baseband. In general, a basic approach to reduce the DC-offset is to do simple average of the baseband signal and remove the DC by subtracting the average. However, this gives rise to a residual DC offset which degrades the performance when the receiver adopts the coding schemes with high coding rates such as 8-PSK. Therefore, more advanced methods should be additionally required for better performance. While the training sequences are basically designed to have good auto-correlation properties to facilitate the channel estimation, they may be not good for the simultaneous estimation of the channel response and the DC-offset. Also the DC offset compensation under a bad condition does not give good results due to the estimation error. Correspondingly, the proposed scheme employs the two important points. First, the training sequence codes are divided into two groups by MSE(Mean Squared Errors) for estimating the channel taps and then SNR calculated from each group is compared to predefined threshold to do fine DC-offset estimation. Next, ON/OFF module is applied for preventing performance degradation by large estimation error under severe channel conditions. The simulation results of the proposed scheme shows good performances compared to the existing algorithm. As a result, this scheme is surely applicable to the receiver design in many communications systems.

  • PDF