• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.6
• /
• pp.47-53
• /
• 2003

In this paper, we described the laboratory layout of the optical CT in connection with the measurement of large current based on Magneto-Optic Effects. It was used He-Ne laser for light source and was used PIN-Photodiode for light receiver. The sensing section was organized by winding optical fiber around conductor on the concept that the rotation angle of polarizing axis by Faraday Effect is proportional to the applied current in to conduction. The optical signal passed through optical fiber sensor was induced to analyzer arranged in the direction of $\theta$ for input polarization, and then analyzed its rotation angle and researched on operating characteristics of optical CT for 60[Hz] AC current measurement from l00[A] to 1000[A] was carried out. In this results, the output signals induced linearly with the current and proved that the intensity is increased with increasing turns of fiber through output differences which in accordance with turns of fiber and we verified that there is not only difference of the output with the medium between electric field and optical fiber, but also the lineality. Measuring the references and output intensities of the optical CT, ratio errors were within $\pm$7%. This confirmed that error rate will be improved by each medium and turns.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.34 no.3
• /
• pp.220-225
• /
• 2014

Generally, the nonlinearity of ultrasonic waves is measured using a nonlinear parameter ${\beta}$, which is defined as the ratio of the second harmonic's magnitude to the power of the fundamental frequency component after the ultrasonic wave propagates through a material. Nonlinear parameter ${\beta}$ is recognized as an effective parameter for evaluating material degradation. In this paper, we evaluated the nonlinear parameter of Al6061-T6 which had been subjected to an artificial aging heat treatment. The measurement was using the transmitted signal obtained from contact-type transducers. After the ultrasonic test, a micro Vickers hardness test was conducted. From the result of the ultrasonic nonlinear parameter, the microstructural changes resulting from the heat treatment were estimated and the hardness test proved that these estimates were reasonable. Experimental results showed a correlation between the ultrasonic nonlinear parameter and microstructural changes produced by precipitation behavior in the material. These results suggest that the evaluation of mechanical properties using ultrasonic nonlinear parameter ${\beta}$ can be used to monitor variations in the mechanical hardness of aluminum alloys in response to an artificial aging heat-treatment.

• Journal of Conservation Science
• /
• v.26 no.1
• /
• pp.61-67
• /
• 2010

After selecting five types of adhesive epoxy resin for metallic cultural assets such as $Araldite^{(R)}$ rapid type, $Devcon^{(R)}$, $Araldite^{(R)}$ SV427+HV427, $CDK^{(R)}$520, $Araldite^{(R)}$ AW106+HV953 which had already been studied, this paper approached more closely the problem of yellowing and the signal of aging with time passing by connecting the problems with the safety of metallic cultural assets. The change of physical properties according to the change of state of epoxy adhesives was investigated through the change of flexural strength and the change of surface hardness by artificially providing the possible environmental change factors such as ultra-violet ray, and acid base, and how the epoxy chemically changes in its ingredients by the environment was analyzed through FT-IR. As a result of the experiment, for the most part of adhesives brought about the physical change of flexural strength, the change of surface hardness, and the chemical change of chemical ingredients as the product of alcohol, which were respectively different according to the time of ultraviolet irradiation, and acid base change. Under most of the conditions, SV427+HV427 and $CDK^{(R)}$520 were fairly stabilized under each condition of weatherability, but it seems that they should be refrained from being applied in case that the area to restore is thin and wide because the degree of flexural strength of themselves is low. Also, it is found that the preservation environment is very important not only for artifacts but also for the preservation of resins sused for preservation treatment.

• Journal of Broadcast Engineering
• /
• v.11 no.2 s.31
• /
• pp.207-221
• /
• 2006

A fully automatic and computationally efficient method is proposed for intelligent display of soccer video on small multimedia mobile devices. The rapid progress of the multimedia signal processing has contributed to the extensive use of multimedia devices with a small LCD panel. With these emerging small mobile devices, the video sequences captured for standard- or HDTV broadcasting may give the small-display-viewers uncomfortable experiences in understanding what is happening in a scene. For instance, in a soccer video sequence taken by a long-shot camera technique, the tiny objects (e.g., soccer ball and players) may not be clearly viewed on the small LCD panel. Thus, an intelligent display technique is needed for small-display-viewers. To this end, one of the key technologies is to determine region of interest (ROI), which is a part of the scene that viewers pay more attention to than other regions. In this paper, the focus is on soccer video display for mobile devices. Instead of taking visual saliency into account, we take domain-specific approach to exploit the characteristics of the soccer video. The proposed scheme includes three modules; ground color learning, shot classification, and ROI determination. The experimental results show the propose scheme is capable of intelligent video display on mobile devices.

• The Journal of the Korea Contents Association
• /
• v.17 no.8
• /
• pp.463-471
• /
• 2017

Recently, the number of pet-owning households drastically increased and many people took their pets as lifelong companion animals and look after them like their children. Pet business has continued to increase gradually and the need for pet supplies has increased, too. Though there are a variety of pet supplies in pet dog market which takes up many parts in the pet market, there is no design guideline on pet supplies. Thus, there are many wrong pet supplies design created by wrong idea of people. Therefore, this study aims to suggest the guideline on pet supplies design focusing on the pet-monitoring system among the various pet products. So, the pet-monitoring robot was designed to monitor pet simply using smartphone anywhere on the trip and feed by using bowl that control the signal. This study figured out types and function of existing IP camera, reflected the behavior and physical characteristics of pets and suggested the design guideline which is minimum required as pet-monitoring products. Also, trial product for which design guide was applied was produced to observe the pet behavior and identify problems while operating trial product. However, there was limit in securing data and study period to examine the satisfaction of various pets since the subject of this study was dog and it's required to conduct follow-up study by observing continuously and improving the problems in future to secure more data.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.7
• /
• pp.66-76
• /
• 2000

Acoustic performance of loudspeakers for sound reproduction has been qualitatively evaluated by using the listening test by juries in the development and final evaluation stages. However, the subjective evaluation method has many problems in the viewpoint of reliability and repeatability that are mainly related to the jury performance, as well as time and economy. In this reason, objective techniques should be tried to evaluate the acoustic performance of loudspeakers as well as the conventional subjective test. The object of this study is to find if there is any correlation between the statistically treated in test results and the measured results based on the loudness of reproduced sound signals. For the four-step statistical analysis, the analysis of variance (ANOVA) and Tukeys method are employed for dealing with the data from the listening test. For the objective evaluation, Zwickers loudness considering the human hearing characteristics is calculated for the measured sound signal emitted from each loudspeaker and the objective ratings such as fidelity rating (FR) and softness rating (SR) is suggested. The correlation between two ratings has been demonstrated for an actual set of loudspeakers using FR, SR and correlation coefficient. The method in this study can be useful in statistically evaluating commercial or prototype loudspeakers without using very time-consuming and expensive subjective testing.

• Journal of Microbiology and Biotechnology
• /
• v.25 no.7
• /
• pp.999-1006
• /
• 2015

The endo-polygalacturonase gene (endo-pgaA) was cloned from DNA of Aspergillus niger SC323 using the cDNA synthesized by overlapping PCR, and successfully expressed in Saccharomyces cerevisiae EBY100 through fusing the α-factor signal peptide of yeast. The fulllength cDNA consists of 1,113 bp and encodes a protein of 370 amino acids with a calculated molecular mass of 38.8 kDa. After induction by galactose for 48 h, the activity of recombinant endo-PgaA in the culture supernatant can reach up to 1,448.48 U/mg. The recombinant protein was purified to homogeneity by ammonium sulfate precipitation and gel filtration column chromatography and subsequently characterized. The optimal pH and temperature of the purified recombinant enzyme were 5.0 and 50℃, respectively. The Michaelis-Menten constant (K_m) and maximal velocity (V_max) of the enzyme for pectin were 88.54 μmol/ml and 175.44 μmol/mg/min, respectively. The enzyme activity was enhanced by Ca²⁺, Cu²⁺, and Na⁺, and strongly inhibited by Pb²⁺ and Mn²⁺. The pectin hydrolysates were mainly galacturonic acid and other oligo-galacturonates. Therefore, these characteristics suggest that the recombinant endo-PgaA may be of potential use in the food and feed industries.

• Microbiology and Biotechnology Letters
• /
• v.40 no.4
• /
• pp.348-355
• /
• 2012

In the present study, we investigated the overexpression and characterization of bovine pancreatic (bp)- DNase I in Saccharomyces cerevisiae and Pichia pastoris. The bp-DNase I gene was fused in frame with the GAL10 promoter, $MF{\alpha}$, and GAL7 terminator sequences, resulting in the plasmid, pGAL-$MF{\alpha}$-DNaseI (6.4 kb). Also, the bp-DNase I gene was fused in frame with the AOX1 promoter, $MF{\alpha}$, and AOX1 terminator sequences, resulting in the plasmid, pPEXI (8.8 kb). The recombinant plasmids, pGAL-$MF{\alpha}$-DNaseI and pPEXI were introduced into S. cerevisiae and P. pastoris host cells, respectively. When the transformed yeast cells were cultured at $30^{\circ}C$ for 48 h in galactose or methanol medium, bp-DNase I was overexpressed and the most of activity was found in the extracellular fraction. P. pastoris transformant activity showed 45.5 unit/mL in the culture medium at 48 h cultivation, whereas S. cerevisiae transformant revealed 37.7 unit/mL in the extracellular fraction at 48 h cultivation. The enzymatic characteristics, such as DNA cleavage and half life were investigated. Treatment of the recombinant DNase I from P. pastoris induced degradation of the calf thymus DNA within 1 minute, and this DNA degradation rate was higher than that of commercial bp-DNase I (SIGMA) and the recombinant DNase I from S. cerevisiae.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.23-30
• /
• 2016

ccording to the airport railroad linkage facility expansion project constructing a connecting line to the airport railway and improving the signal system and Gyeongui Susaek Station, a high-speed train is able to run directly from Gyeongbu and Honam to the airport railway. According to mixed operation of high-speed Korea Train Express (KTX) and Airport Railroad Express (AREX) trains, to establish ERTMS/ETCS L1 ATP to operate the KTX train, the signaling system of the AREX train is the same as the existing ATC/ATO, but its operation became impossible because the high-speed train causes mutual interference between the "high-speed train (KTX) and AREX ground signaling equipment" and between the "AREX train and KTX (high-speed train) ATP ground equipment." Thus, it was necessary to have a supplemental technical interference analysis comparing the characteristics of the AREX beacon and the KTX balise. So, we resolve the problems of mutual interference between the "high-speed train (KTX) and AREX ground signaling equipment" and between the "AREX train and KTX (high-speed train) ATP ground equipment" with a test using an actual train, and we confirm the technical validity with three types of test module.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.5A
• /
• pp.490-496
• /
• 2007

This paper describes the design and implementation of an integrated LTCC front-end module for the IEEE802.11a WLAN applications by performing the behavioral-level simulation using measurement-based behavioral model. To meet the IEEE802.11a WLAN standard, a system transmitting 1024 symbols through 64-QAM process at the rate of 54Mbps should be implemented and nonlinear properties are confirmed by simulations of ACPR and EVM in this circumstance. The right offsets of ACPR which are 30MHz, 20MHz, and 11MHz distant from the center frequency of 5.8GHz are 49.36dBc, 36.90dBc, and 24.58dBc, respectively. The left offsets are 50.14dBc, 30.04dBc, and 28.85dBc, respectively and EVM is 2.94%. The size of the module implemented with LTCC five-layer substrates is $13.4mm{\times}14.2mm$. The measured characteristics of the transmitter show P1dB of 16.2dBm and power gain of 16.73dB. Those of the receiver exhibit the small signal gain of 16.24dB and noise figure of 7.83dB.