• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 1999.10a
• /
• pp.337-346
• /
• 1999

In this paper, we propose the rough set approach to extract trading rules able to discriminate between bullish and bearish markets in stock market. The rough set approach is very valuable to extract trading rules. First, it does not make any assumption about the distribution of the data. Second, it not only handles noise well, but also eliminates irrelevant factors. In addition, the rough set approach appropriate for detecting stock market timing because this approach does not generate the signal for trade when the pattern of market is uncertain. The experimental results are encouraging and prove the usefulness of the rough set approach for stock market analysis with respect to profitability.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1231-1234
• /
• 2003

A sensor working in outdoor may generate some faulty signal owing to dust and high temperature. This paper describes an intelligent sensor system and controller which has a reconstruction mechanism for faulty signal. The faulty signals are dievided into two types as linear distortion and non linear distortion, respectively. The linear distorted signal is due to dust, and non linear distorted signal is due to physical breakdown of sensor or high temperature. These distorted signal have been reconstructed by the proposed method based on polynomial regression method and principal component analysis approach.. The proposed method has been applied to sun tracking system working in outdoor. For a robust and precision control of sun tracker, a fuzzy controller was also proposed. The fuzzy controller controls the tracker by using the collected sensor signal. The tolerance of the position control is within 1.5 degree. To show the validity of the developed system, some experiments in the field were illustrated.

• Journal of Positioning, Navigation, and Timing
• /
• v.8 no.4
• /
• pp.153-164
• /
• 2019

This paper presents the development of an end-to-end numerical simulator for signal design of the next generation global navigation satellite system (GNSS). The GNSS services are an essential element of modern human life, becoming a core part of national infra-structure. Several countries are developing or modernizing their own positioning and timing system as their demand, and South Korea is also planning to develop a Korean Positioning System (KPS) based on its own technology, with the aim of operation in 2034. The developed simulator consists of three main units such as a signal generator, a channel unit, and a receiver. The signal generator is constructed based on the actual navigation satellite payload model. For channels, a simple Gaussian channel and land mobile satellite (LMS) multipath channel environments are implemented. A software receiver approach based on a commercial GNSS receiver model is employed. Through the simulator proposed in this paper, it is possible to simulate the entire transceiver chain process from signal generation to receiver processing including channel effect. Finally, numerical simulation results for a simple example scenario is analyzed. The use of the numerical signal simulator in this paper will be ideally suited to design a new navigation signal for the upcoming KPS by reducing the research and development efforts, tremendously.

• Journal of Communications and Networks
• /
• v.18 no.5
• /
• pp.735-743
• /
• 2016

This paper proposes a direction-of-arrival (DOA)-based beamforming approach for multi-cell massive multiple-input multiple-output systems with uniform rectangular arrays (URAs). The proposed approach utilizes the steering vectors of the URA to form a basis of the spatial space and selects the partial space for beamforming according to the DOA information. As a result, the proposed approach is of lower computational complexity than the existing methods which utilize the channel covariance matrices. Moreover, the analysis demonstrates that the proposed approach can eliminate the interference in the limit of infinite number of the URA antennas. Since the proposed approach utilizes the multipaths to enhance the signal rather than discarding them, the proposed approach is of better performance than the existing low-complexity method, which is verified by the simulation results.

• The KIPS Transactions:PartC
• /
• v.14C no.4
• /
• pp.383-388
• /
• 2007

In this paper, we propose a new signal frame structure based on Alamouti code that can maintain the same performance as Alamouti code and increase spectral efficiency. The proposed signal frame structure can increase spectrum efficiency to approach 1(bit/s/Hz) since it can process n bit data during (n+1) time slot. In order to verify two performances, we derive closed form BER via mathematical approach, and compare with the simulation result in Rayleigh fading plus AWGN channel. Then we find that the two performances are exactly same.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2011.07a
• /
• pp.137-140
• /
• 2011

A precoding strategy is one of the representative interference management techniques in cognitive radio (CR) network which is a typical interference-limited environment. The interference minimization approach to precoding is an appropriate scheme to mitigate the interference efficiently while it may cause the capacity loss of the desired channel. The precoding scheme for the maximal capacity of the desired channel improves the capacity of the desired channel while it increases the interference power and finally causes the capacity loss of the interfered users. Therefore, we propose a precoding scheme which satisfies these two conflicting goals and manages the interference signal in such an interference-limited environment. The proposed scheme consists of two steps. First, the precoder nulls out the largest singular value of the interference channel to mitigate the dominant interference signal based on the interference minimization approach. Second, the transmitter calculates the sum capacities per mode and selects a mode to maximize the sum capacity. In the second step, each mode consists of the right singular vectors corresponding to the singular values except the largest singular value eliminated in the first step. Simulation results show that the proposed precoding scheme not only efficiently mitigate the interference signal, but also has the best performance in terms of the sum capacity in a MIMO-based CR network.

• Current Optics and Photonics
• /
• v.2 no.1
• /
• pp.7-14
• /
• 2018

As a sophisticated detection technology, LIDAR has been widely employed to probe low-altitude windshear. Due to the drawbacks of the traditional ramp algorithm, the alarm accuracy of the LIDAR has not been satisfactory. Aiming at settling this matter, a novel method is proposed on the basis of improved signal smoothing and second windshear detection, which essentially acts as a combination of ramp algorithm and segmentation approach, involving the human factor as well as signal fluctuations. Experiments on the real and artificial signals verify our approach.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.5C
• /
• pp.673-682
• /
• 2004

The adaptive beam-forming is promising approach for noise reduction in hearing aids. This approach has come in the focus of interest only recently, because of the availability of new and powerful digital signal processors. The adaptation U using usually a Least Mean Squares algorithm, updates the weight vector. In this Paper, we propose a fast wavelet based adaptive algorithm using variable step size algorithm which varies adaptive constant by the change of signal environment. We compared the performance of the proposed algorithm with the known adaptive algorithm using computer simulation of multi channel adaptive bemformer in hearing aids. As the result the proposed algorithm is suitable for adaptive signal processing area using hearing aids and has advantages reducing computational complexity. And we show the beam-forming system using proposed algorithm converges stably in a sudden change of system environment.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.5
• /
• pp.108-114
• /
• 2007

A new cutting force estimating approach and machining state monitoring examples are presented which uses a cylindrical displacement sensor built into the spindle. To identify the tool-spindle system dynamics with frequency up to 2 kHz, a home-built electro-magnetic exciter is used. The result is used to build an algorithm to extract the dynamic cutting force signal from the spindle error motion; because the built-in spindle sensor signal contains both spindle-tool dynamics and tool-workpiece interactions. This sensor is very sensitive and can measure broadband signal without affecting the system dynamics. The main characteristic is that it is designed so that the measurement is irrelevant to the geometric errors by covering the entire circumferential area between the target and sensor. It is also very simple to be installed. Usually the spindle front cover part is copied and replaced with a new one with this sensor added. It gives valuable information about the operating condition of the spindle at any time. It can be used to monitor cutting force and chatter vibration, to predict roughness and to compensate the form error by overriding spindle speed or feed rate. This approach is particularly useful in monitoring a high speed machining process.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.2C
• /
• pp.109-116
• /
• 2006

Many application scenarios of ultra-wideband(UWB) radio assume non-line-of-sigit(non-LoS) signal propagations. Through-material propagation of UWB signal introduces a distortion of the waveform as well as attenuation, which will introduce a decrease of the correlation coefficient between the correlator template and the received signal. A hypothesis test approach to selection of the template waveform for UWB rake receivers is posed. Linde-Buzo-Gray(LBG) algorithm is used to select the candidate waveforms which are used to setup the hypothesis test. The performance of the algorithm is tested using a set of indoor non-LoS propagation measurement data.