• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.3
• /
• pp.14-21
• /
• 2007

Sight Stabilization system is the control system to preserve Line of Sight for the targets though many nonlinear disturbances and vibrations are generated. In this paper, we identified Stabilization system using RLS algorithm, one of the system identification algorithm and found out the modeling of system. Considering nonlinear operational condition this paper proposes two Knowledge-base controllers - Fuzzy controller, Fuzzy PI Gain Scheduling controller, and simulates the performances of proposed controllers compare with Lead PI controller being used in Sight system of NFIV.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.24 no.2
• /
• pp.1-12
• /
• 1996

In order to develope a road landscape that is in harmony with landscaping purpose, degree of sight occupation by slopes at road sides was measured and physical elements composing the slope scenery were visually evaluated and the results are as follows : In analysis of sight occupation ratio by perspective method, gradient of the slopes influenced more on the sight occupation than height did and the driving lane occupied 2 to 3% more proportion of sight than the passing lane. When there is slope at one side of the road, difference in sight occupation between the lanes was increasing with deceased height and with increased gradient of the slopes. In visual analysis of the slope scenery, negative image was increasing with narrow road, increased height and gradient of the slopes. In visual analysis of the slope scenery, negative image was increasing with narrow road, increased height and gradient of the slopes. Particularly, the effect of gradient was critical on scenery. The effect of the slopes was negative at 60$^{\circ}$ or more but positive at 45$^{\circ}$or less gradient. This phenomenon was more conspicuous with wide 4 lane roads than wide 2 lane roads. Although direct comparison is difficult due to a great difference between Korea and U.S.A. in climate, land condition, road dimension, and public process of purchasing land, etc, it is desirable to treat road sides so that the scenery is in harmony with landscape around as well as emphasizing the regional characteristics, also giving friendly and comfortable image to drivers and nearby residents in addition to safety as can be seen in U.S.A.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.7
• /
• pp.1738-1748
• /
• 1999

Recent simulation tools combine the 3-dimensional graphic technique to implement the 3D visualization of the objects in the 2-Dimensional computer display. In this paper, a sight simulation tool is implemented using the recent 3D techniques. The proposed sight simulator can be applied to improve the human environment with the harmony of the nature. The system is consisted of modules for topography, object, and navigation. A sight database for the sight elements(objects) is implemented using Java. Combined with Java, VRML, which is considered as the standard for 3D virtual reality in the Internet is used to implement EAI(External Authoring Interface). EAI allows the users to communicate with a VRML scene.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.7
• /
• pp.119-124
• /
• 1999

A method to find the line of sight ray in space which corresponds to a point in an image plane is presented. The line of sight ray is defined by two points which are the intersections between the two calibration planes and the sight ray. The intersection point is found by the oblique coordinate mapping between the image plane and the calibration plane in the space. The proposed oblique coordinate mapping method has advantages over the transformation matrix method in the required memory space and computation time.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10a
• /
• pp.327-332
• /
• 1990

Gunner primary sight stabilization system is a fully integrated sensor package designed to provide the stabilized Line-of-Sight. In this study, to improve disturbance rejection capabilities, two types of compensator (LQG/LTR, Lead-Lag) were designed and then stabilization performances were compared under severe off-road environment. Simulation results shows that the stabilization performances using LQG/LTR methodology is better than Lead-Lag methodology in spite of dynamic uncertainties.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10a
• /
• pp.643-647
• /
• 1990

Gunner primary sight(GPS) stabilization system lays line of sight(LOS) to find out a target and transmits informations to the fire control system (FCS). In a moving vehicle, accuracy of LOS and FCS depends on the design of GPS and servomechanism system. The heavy vibration of vehicle on the severe off-road environment degenerates the stabilization capability of GPS. In this study, to stabilize of elevation for GPS using the variable structure control, we derived the dynamic equation of GPS system and designed the variable structure controller. Computer simulation results fulfilled the static and dynamic stability of GPS using the variable structure control.

• Proceedings of the KIEE Conference
• /
• 2006.04a
• /
• pp.201-203
• /
• 2006

This paper describes a new LOS(Line-of-Sight) estimator for BTT missiles. The dynamic models of LOS rate and a seeker are derived. Based on these dynamic models, we design a nonlinear estimator, which takes into account roll motion of BTT missiles and sensor noises. Simulation results show that the LOS rate estimates of the proposed estimator are more accurate than those of the conventional estimator.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.11a
• /
• pp.233-238
• /
• 2004

In this study, speed survey has been conducted on Pusan Freeway to identify actual running speed. therefore, suggest that Highway Design Regulations and Highway Design Standard from Ministry of Construction and Transportation, which requires stopping sight distance for 20% less speed when rainy condition in accordance with Highway Safety Act, is not coincident with driver's characteristics. Consequently, it is prudent to compute stopping sight distance with 85th percentile running speed, considering driver's actual behavior and mountainous terrain.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.2
• /
• pp.168-172
• /
• 2015

In general, open-loop fiber-optic gyroscopes (FOG) are less stable than closed-loop FOGs but they offer simpler implementation. The typical operation time of line-of-sight (LOS) stabilization systems is a few seconds to one hour. In this paper, a open-loop fiber optic gyroscope (FOG) for LOS applications is designed and implemented. The design goal is aimed at implementing a low cost, compact FOG with low Angle Random Walk (ARW) (< $0.03deg/\sqrt{h}$) and bias instability (< 0.25deg/h). The FOG uses an open-loop all-fiber configuration with 100M PM fiber wound on a small diameter spool. In order to get the design goal, digital signal processing techniques for signal detection, modulation control and compensation are designed and implemented in FPGA.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2006.04a
• /
• pp.431-436
• /
• 2006

The latest system of GIS has been changing from 2 dimension to 3 dimension. According to the rapid growth of the fields linked to 3D GIS, 3D GIS has variously affected the public field, the national defense field, and the industrial field. This study estimated sight distance safety of curve section considering the environmental impact based on 3D GIS. Sight distance is calculated from the relation between road which keeps the three-dimension character and driver gaze, so it needs to consider both plane and vertical ior the accurate measuring. This study made analysis of the sight distance through considering the environmental impact with driving simulation of design speed 80km/h and running speed 60-120km/h.