• Journal of the Korean Institute of Navigation
• /
• v.3 no.2
• /
• pp.21-30
• /
• 1979

Echo sounder and Doppler sonar are to theultra-sonic transducers for measuring the depth and the ship's speed respectively. To measure the depth and speed with a single transducer, it is required to control the ultra-sonic beam to optional direction. In the past, the direction of the transducer itself is varied, but such a method provoked much problems in the mechanical design of the equipment. This paper deals with the method to control beam direciton by the phase control of the plural arrangement of transducers, and the results are studied by a computer simulation. The remarkable results of the study is condensed as follows; 1. The greater the interval of arrangement between transducers, the sharper the radiation pattern is, but in this case, the level of undesired sidelobe is also increased. 2. The control of radiation pattern up to 60 degree can be achieved by an adequate arrangement of more than 10 transducers. 3. It is shown that a simultaneous measurement of both depth and speed can be achieved by alternating directivity of the pulse by the method proposed in this paper.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.10
• /
• pp.16-23
• /
• 1990

In this paper, the shaped offset Cassegrain antenna with low sidelobe, low cross-polar level, and high efficiency is designed. The design data is presented for shaping scheme. The validity of radi-ation characteristics is accomplished by comparing the result of measurement with numerical calculation and design goal. Experimental results of designed antenna are in good agreement with design goal except efficiency.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.5
• /
• pp.32-37
• /
• 1989

The design method of the center-fed resonant type slotted waveguide antenna using the Dolph-Tschebyscheff array is presented. Slot admittances are obtained by empirical and theoretical method since the effect of mutual coupling between slots is included. We design a slotted waveguide antenna which has 1.8ft. length and operates on 9.4GHz. The experimental results of the antenna show that its gain, maximum sidelobe level and half power beam-width are 25.5dB, -22dB and 3.6deg., respectively.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.6 no.3
• /
• pp.113-121
• /
• 2003

In this paper, the transmit antenna for the space feeder used for the phased array antennas is investigated. The multi-aperture horn antenna is proposed as the transmit antenna and the characteristics are verified with the Matlab coding, HFSS of Ansoft Corp., and MWS of CST Corp., The E-plane and H-plane beam patterns of the multi-aperture horn antenna are nearly symmetrical and the sidelobe level of the I-plane beam pattern is lower than that the of general pyramidal horn antenna. The fabricated multi-aperture horn antenna is measured using the near-field measurement system. The measured results show good agreement with the simulated ones.

• Proceedings of the IEEK Conference
• /
• 2002.06a
• /
• pp.455-458
• /
• 2002

Design methods are presented for an X-band traveling-wave slot array realized on a rectangular waveguide. An array of 21 longitudinal slots is realized on the broad wall of a rectangular waveguide. The squint of the antenna main beam is adjusted using the element spacing and the waveguide broad wall dimension. The excitation of the array is controlled by the slot offset from the waveguide center line Multiple I-plane steps are placed around last slot elements so that the second-order beam due to tile reflected wave Is minimized A waveguide-to-coaxial adapter Is designed for feeding the array antenna from a coaxial system. Results of the design show an outstanding performance of the antenna 17.1 dB gain. 36"beam 1111, and -21 dB maximum sidelobe level.evel.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.68 no.1
• /
• pp.83-89
• /
• 2019

In this paper, beam forming using moving least squares method (MLSM) is studied. In the previous research, the least squares method (LSM), one of the data interpolation methods, was used to determine the desired beam pattern and obtain a beam pattern that minimizes the square of the error with the desired beam pattern. However, LSM has a disadvantage in that the beam pattern can not be formed to satisfy the exact steering angle of the desired beam pattern and the peak sidelobe level (PSLL) condition. To overcome this drawback, MLSM is used for beam forming. In order to verify, the proposed method is applied in beam forming of Bezier platform array antenna which is one of conformal array antenna platform.

• Journal of Electrical Engineering and information Science
• /
• v.1 no.1
• /
• pp.156-159
• /
• 1996

Element failure occurs with high probability for every array used in the real world ; that is, it is a common phenomenon that there are one or more elements with no output. Element failure produces an elevated sidelobe level and fails to reject the interference signals in an adaptive beamformer. In this paper, we present the adaptive beamforming algorithm for array with element failure. The presented method minimizes the array output power subject to a set of linear constraints which maintain the frequency response in the look direction and force the weights of the inoperative elements to zero. Numerical results have been included.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.5 no.1
• /
• pp.25-36
• /
• 2006

This paper discusses the implementation and performance evaluation of a DSP-based digital beamformer using the Texas Instrument TMSC6711 DSP processor for smart antenna applications. Two adaptive beamforming algorithms which served as the brain for the beamformer, the Normalized Least-Mean-Square (NLMS) and the Constant Modulus Algorithms (CMA) were embedded into the processor and evaluated. Result shows that the NLMS-based digital beamformer outperforms the CMA-based digital beamformer: 1)For NLMS algorithm, the antenna steers to the direction of the desired user even at low iteration value and the suppression level towards the interferer increases as the number of iteration increase. For CMA algorithm, the beam radiation pattern slowly steers to the desired user as the number of iteration increased, but at arate slower than NLMS algorithm and the sidelobe level is shown to increases as the number of iteration increase. 2) The NLMS algorithm has faster convergence than CMA algorithm and the error convergence for CMA algorithm sometimes is subject to misadjustment.

• Journal of electromagnetic engineering and science
• /
• v.10 no.1
• /
• pp.18-24
• /
• 2010

A Ka-band microstrip array antenna for wide-range detection of moving targets is analyzed through a photonicassisted reactive-near-field characterization technique. The antenna array employs a 3-dB-tapered feed network to suppress the sidelobe level while retaining a wide azimuth beamwidth for a wide detection range. The relative nearelectric field patterns of the array and its 3-dB-tapered feed lines have been measured using an electro-optic fieldmapping technique for minimally invasive millimeter-wave sensing. A number of typical limitations on the technique, involving bandwidth, low signal-modulation depth, and high laser-induced noise in high-frequency applications, have been overcome by suppressing the carrier portion of the optical interrogation beam.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.2
• /
• pp.227-236
• /
• 2001

This paper proposes a frequency-domain partially adaptive algorithm, called a censoring algorithm, to reduce the computational complexity of the frequency domain adaptive array. The proposed censoring algorithm determines the existence of interferences in the frequency-domain at each frequency bin using a constant false alarm rate (CFAR) processor. The censoring algorithm adapts only those parts of the weights that correspond to the frequency bins expected to contain interferences. The censoring algorithm is also expanded to overcome the signal cancellation phenomenon caused by smart jammers. Accordingly, a censoring spatial smoothing, which combines the censoring algorithm with spatial smoothing, is proposed. Simulation results show that the proposed algorithms are effective in removing interferences with only part of the computational complexity of conventional algorithms yet with the same level of performance.