• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.10
• /
• pp.876-884
• /
• 2015

In this paper, a switched beamforming antenna system at 28 GHz frequency band is described for $5^{th}$ generation wireless communication. The butler matrix is used as a beamforming system and it produces linear spaced phase difference at four output ports. Array antenna is designed that can be steered in desired 4 different directions 28 GHz frequency band. Operation of designed butler matrix that composed of couplers and feedline is explained. The antenna system is designed in RO3003 substrate that has a height of 5 mil and dielectric constant of 3. The size of butler matrix is $20.3{\times}13.0mm^2$ and size of array antenna is $21.2{\times}19.9mm^2$. This system can be steered from $-34^{\circ}$ to $33^{\circ}$ and minimum sidelobe level is 12.9 dB.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.3
• /
• pp.209-216
• /
• 2003

We design and fabricate slot array antenna for BMWS(Broadband Multimedia Wireless System) applications. This paper presents a simple feed structure, which consists of two horns and a parallel-plate waveguide, because antennas operating at 40.5 GHz~43.5 GHz have considerable feeding losses. The simple feed structure has the advantages of high-efficiency and mass-production. The fabricated antenna has a gain of 25.8 dBi with a sidelobe level below -18 ㏈ and a 3 ㏈ beamwidth of approximately 3$^{\circ}$ in the E-plane. In case of H-plane, a 3 ㏈ beamwidth is 17$^{\circ}$ and a sidelobe level is suppressed to below -27 ㏈. The experimental results are in good agreement with the simulation results. The authors expect that narrow 3 ㏈ beamwidth is obtained by combining a few proposed slot array antennas in parallel.

• Journal of Satellite, Information and Communications
• /
• v.5 no.2
• /
• pp.34-39
• /
• 2010

Due to big demand for satellite and communication service using personal handheld terminals, demand for satellites with huge antennas is increasing correspondingly. While such large antennas are realized by various types of deployable antennas, the reflecting surface is made by many facets irrespective of deploying mechanisms. In order to analyze the faceted-reflector more accurately, an existing ray-tracing method is improved. The algorithm allows the rays to cross each other, which is the main characteristic of the faceted-reflector, and takes unevenness of amplitude and phase over the aperture plane into consideration. For the study of the effect of facet configuration, facet generating algorithm is devised. From the analysis algorithm and the facet-generating algorithm, it has been found that the number of facets in a radial direction affects both directivity and sidelobe level. On the other hand, the number of facets in a circumferential direction affects sidelobe level only.

• The Journal of the Acoustical Society of Korea
• /
• v.34 no.4
• /
• pp.264-273
• /
• 2015

Improvement of the radiation beam profile of a medical ultrasonic transducer has been researched in this paper. In order to improve the beam profile, a new transducer structure has been devised that includes both a shaded electrode and a multi-focus lens. For a linear sound source, the beam profile was investigated through finite element analysis, and then the optimal design of the devised structure was carried out by considering such performances as sidelobe level, focal range and beamwidth simultaneously. In the process, the optimal dimension of the devised structure was derived by using the ratio of the focal range to the minimum beamwidth as a performance index. As a result, the beam profile has been improved to have a lower sidelobe level at -20.2 dB and a consistent narrow beamwidth from 30 mm to 160 mm depth with the minimum beamwidth at 2.04 mm. Further, a prototype transducer was fabricated to have the devised structure, and its performance was measured and compared with the analysis results to confirm the validity of the devised transducer structure.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.5 no.3
• /
• pp.101-109
• /
• 2012

Because the installation problem of parabola antenna that is tilted to 45 degree when this antenna is installed at the area of middle latitude, the study on planar antenna in place of parabola antenna is made rapid progess. Especially, The development of the planar antenna for VSAT is needed depending on the increased Ka-band satellite communications. In this paper, in order to meet with these performances, an array antenna consisting of the vertical polarized waveguide longitudinal slots based on the leaky-wave mode of traveling wave antenna is proposed. Especially, for the lower sidelobe level, the design method of the radiation power distribution control using the different slot widths is proposed. An array antenna consisting of 32 leakywave waveguide antennas is showing 35.16 dBi of gain, 2.5 degree of beamwidth at azimuth, below than -30 dB of sidelobe level, 45.8 degree of beam tilt angle in center frequency 30.2 GHz.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.4
• /
• pp.535-540
• /
• 2013

We design a slotted waveguide antenna for X-band which a 1.4m length with slot depth variation. A 54 slot array is modeled and simulated by CST, and the side lobe level is suppressed effectively in a certain range of frequency. The experimental results of the antenna show that its gain, maximum sidelobe level and half power beam-width are 21.8dB, -31dB and 2.0deg, respectively.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.4
• /
• pp.88-94
• /
• 2004

The electrical design of the Ka-band antenna for the domestic Communications and Broadcasting Satellite (CBS) is described. The antenna has the offset Gregorian structure and is installed on the Earth-facing panel of the satellite. The electrical performance specifications for the antenna were determined from the required EIRP and G/T through the payload level performance analysis. This paper utilized the reflector shaping technology for the trade-off among the major performance parameters, resulting in compliance of all the parameters. The designed antenna shows 37.95 dBi EOC (End of Coverage) gain and 28.7 dB sidelobe isolation for transmit band, and 37.49 dBi EOC gain and 31.1 dB sidelobe isolation for receive band, The electrical performances of the antenna have been verified via the electrical testing of a manufactured EQM (Engineering Qualification Model) antenna.

• Journal of Satellite, Information and Communications
• /
• v.2 no.2
• /
• pp.10-15
• /
• 2007

Small size and low profile antenna for mobile vehicular-top-mounted is needed in satellite communication services such as DBS, Satellite Internet and VSAT. In middle latitudes, the development of an array antenna which has the conformal, low profile and 45 degree beam tilted configuration, and has the high gain with sharp beamwidth, low sidelobe and low loss is required for Ku-band satellite communication. In this paper, in order to meet with these performances, an array antenna consisting of the vertical polarized waveguide longitudinal slots based on the leaky-wave mode of traveling wave antenna is proposed. An array antenna consisting of 16 leaky-wave elements is showing 30 dBi of gain, 4.9 degree of beamwidth, below than -20 dB of sidelobe level, 45 degree of beam tilt angle in center frequency. Feed network designed by waveguide cooperated feed shows good performance of wideband and low loss.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.4C
• /
• pp.476-483
• /
• 2009

Tracking and detecting targets by the microwave seeker is affected by the clutter reflecting from the earth's surface. In order to detect retreating targets in look-down scenario, which appear in the sidelobe clutter (SLC) region, in the microwave seeker of high pulse repetition frequency (HPRF) mode, it is necessary to understand statistical characteristics of the surface SLC. Statistical analysis of SLC has been conducted for several kinds of the surface using data obtained by the captive flight test of the microwave seeker in the HPRF mode. The probability density function (PDF) fitting is conducted for several kinds and conditions of the surface. PDFs and PDF parameters, which best describe statistical distribution of the SLC power, are estimated. By using the estimated PDFs and PDF parameters, analyses for setting the target-detection thresholds, which give a desired level of target-detection false alarm probability, are made. These analysis materials for statistical characteristics of SLC power and the target-detection threshold can be used in various fields, such as development of a target-detection method, the constant false alarm rate processing.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.12
• /
• pp.1296-1302
• /
• 2012

In this research, optimization of a dual-band dipole array was performed using genetic algorithm. A non-uniform, aperture-shared linear array was configured with dipoles which resonate at 4 GHz and 9.5 GHz. The excited current distributions on dipoles were computed considering mutual coupling between dipole elements. The current distributions were also computed using method of moment (MoM). The optimization using genetic algorithm was performed to obtain the low sidelobe levels in two operating frequency band. The PSLs of the optimized array for 4 GHz and 9.5 GHz are -15.7 dB and -17 dB, respectively. Comparison between computed and simulated results are also discussed.