• Journal of Korea Water Resources Association
• /
• v.43 no.6
• /
• pp.525-531
• /
• 2010

In this study, the effects of upstream Froude number ($Fr_1$), weir height (h), weir length (L), weir width (W) and main channel width (B) on the discharge coefficient of broad crested side-weirs in a relatively wide rectangular open channel were investigated experimentally. Furthermore the relationship between discharge coefficients of sharp crested side weir and broad crested side weir was studied using the concept of De Marchi discharge coefficient. The effect of $Fr_1$ on the relationship between discharge coefficients of sharp crested side weir and broad crested side weir is decreased in wide open channel and the relative importance of other influential parameters like h/$y_1$, L/B, and W/($y_1-h$) are increased. New estimated equations for the discharge coefficients of broad crested side weir are suggested from regression analysis with the experiment data sets.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.2C
• /
• pp.172-181
• /
• 2010

In this paper, we propose an adaptive block quantization method. The propose method perfrect reconstructs side information without high complexity in the encoder side, as transmitting motion vectors from a decoder to an encoder side. Also, at the encoder side, residual signals between reconstructed side information and original frame are adaptively quantized to minimize parity bits to be transmitted to the decoder. The proposed method can effectively allocate bits based on bit error rate of side information. Also, we can achieved bit-saving by transmission of parity bits based on the error correction ability of the LDPC channel decoder, because we can know bit error rate and positions of error bit in encoder side. Experimental results show that the proposed algorithm achieves bit-saving by around 66% and delay of feedback channel, compared with the convntional algorithm.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.2
• /
• pp.53-64
• /
• 2011

In this paper, we propose a channel estimation of side information method based received motion vectors for distributed video coding. The proposed decoder estimates motion vectors of side information and transmits it to the encoder. As the proposed encoder generates side information which is the same to one in the decoder with received motion vectors, accuracy of side information of the decoder is assessed and it is transmitted to decoder. The proposed decoder can also estimate accurate crossover probability with received error information. As the proposed method conducts correct belief propagation, computational complexity of the channel decoder decreases and error correction capability is significantly improved with the smaller amount of parity bits. Experimental results show that the proposed algorithm is better in rate-distortion performance and it is faster than several conventional distributed video coding methods.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.5
• /
• pp.525-533
• /
• 2022

We propose an effective method for suppressing both side and grating lobes by applying 2-dimensional Fourier Transform to the received channel data during the receive focusing process of an ultrasound imaging system. When the signal from the image point is focused, the channel signals have the same DC value across the channels. However, even after echoes from outside an imaging point are focused, they are manifested as having different spatial frequencies depending on their incident angles. Therefore, after the receive focusing delay time is applied, 2-D Fourier Transform is performed on the time-channel data to separate the DC component and other frequency components in the spectral domain, and the weighting value is defined using the ratio of the two values. The side lobe and grating lobe were suppressed by multiplying the ultrasound image by a weighting value. Ultrasound images with a frequency of 5 MHz were simulated in a 64-channel linear array. The grating lobe appearing in the ultrasound image was completely removed by applying the proposed method. In addition, the side lobe was reduced and the lateral resolution was greatly increased. Results of computer simulation on a human organ mimicking image show that the proposed method can aid in better lesion diagnosis by increasing the image contrast.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.31 no.7 s.262
• /
• pp.628-634
• /
• 2007

The present study investigated the heat/mass transfer characteristics in an equilateral triangular channel simulating the leading edge cooling passage in gas turbine blade. Using naphthalene sublimation method and pressure measurement experiments, local mass (heat) transfer and pressure coefficients were obtained. The experiments were conducted with three rotating numbers between 0.0 and 0.1; two channel orientations of $0^{\circ}$ (model A) and $30^{\circ}$ (model B); the fixed Reynolds number of 10,000. The results showed that the channel rotation caused the heat transfer discrepancy between suction and pressure sides. Due to the secondary flow induced by Coriolis force, the high heat transfer appeared on the pressure side. When the channel orientation was $30^{\circ}$ (model B), the secondary flow caused the more uniform heat transfer distribution among leading edge and inner wall on pressure side than that of the model A.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.12
• /
• pp.48-52
• /
• 1998

We fabricated the newly proposed nano structure memory with SOI edge channel and a nano dot. The width of the edge channel of this device, which uses the side wall as a channel and has a nano dot on this channel region, was determined by the thickness of the recessed top-silicon layer of SOI wafer. The size of side-wall nano dot was determined by the RIE etch and E-Beam lithography. The I$_{d}$-V$_{d}$, I$_{d}$-V$_{g}$ characteristics of the devices without nano dots and memory characteristics of the devices with nano dots were obtained, where the voltage scan was done between -20 V and 14 V and the threshold voltage shift was about 1 V.t 1 V.

• KIEE International Transactions on Power Engineering
• /
• v.5A no.3
• /
• pp.214-220
• /
• 2005

In order to improve energy efficiency and solve power disturbances, power components measurement for both the supply and demand side of a power system must be implemented before appropriate action on the power problems can be taken. This paper presents a DSP (Digital Signal Processor)-based multi-channel (voltage 8-channel and current 10-channel) power measurement system that can simultaneously measure and analyze power components for both supply and demand. Voltage 8-channel and current 10-channel measurement is made through voltage and current sensors connected to the developed system, and power components such as reactive power, power factor and harmonics are calculated and measured by the DSP. The measured data are stored in a personal computer (PC) and a commercial program is then used for measurement data analysis and display. After voltage and current measurement accuracy revision using YOKOGAWA 2558, the developed system was tested using a programmable ac power source. The test results showed the accuracy of the developed system to be about 0.3 percent. Also, a simultaneous measurement field test of the developed system was implemented by application to the supply and demand side of the three-phase power system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.624-627
• /
• 2014

In vehicular network, the basic goal is to provide vehicle safety service and commercial service such as ITS(Intelligent Transportation System) or video, etc on the road. And most research concentrated on transportation of safety message in congestion situation. It is important to allocate channel for safety message in congestion situation, but providing suitable service is also important problem in vehicular network. For this reason, IEEE 1609.4 allocate 4 multiple service channels (SCHs) for non-safety data transfer. But, in congestion situation with many vehicles, the contention for channel acquisition between services becomes more severe. So services are provided improperly because of lack of service channel. This paper suggests dynamic channel allocation algorithm. The proposed algorithm is that RSU(RaodSide Unit) maintain and manage the information about service and status of channels. On based of the SJF(Shortest Job First) scheduling using those information, RSU selects the most appropriate channel among the 4 SCHs allocated by IEEE 1609.4 in network congestion situation.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.29 no.3
• /
• pp.491-501
• /
• 2019

In side-channel analysis, which exploit physical leakage from a cryptographic device, deep learning based attack has been significantly interested in recent years. However, most of the state-of-the-art methods have been focused on classifying side-channel information in a profiled scenario where attackers can obtain label of training data. In this paper, we propose a new method based on deep learning to improve non-profiling side-channel attack such as Differential Power Analysis and Correlation Power Analysis. The proposed method is a signal preprocessing technique that reduces the noise in a trace by modifying Auto-Encoder framework to the context of side-channel analysis. Previous work on Denoising Auto-Encoder was trained through randomly added noise by an attacker. In this paper, the proposed model trains Auto-Encoder through the noise from real data using the noise-reduced-label. Also, the proposed method permits to perform non-profiled attack by training only a single neural network. We validate the performance of the noise reduction of the proposed method on real traces collected from ChipWhisperer board. We demonstrate that the proposed method outperforms classic preprocessing methods such as Principal Component Analysis and Linear Discriminant Analysis.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.01a
• /
• pp.351-354
• /
• 2009

Distributed video coding (DVC) is a new coding paradigm that enables to exploit the statistics among sources only in decoder and to achieve extremely low complex video encoding without any loss of coding efficiency. Wyner-Ziv coding, a particular implementation of DVC, reconstructs video by correcting noise on side information using channel code. Since a good quality of side information brings less noise to be removed by the channel code, generation of good side information is very important for the overall coding efficiency. However, if there are complex motions among frames, it is very hard to generate a good quality of side information without any information of original frame. In this paper, we propose a method to enhance the quality of the side information using small amount of additional information of original frame in the form of hash. By decoder's informing encoder where the hash has to be transmitted, side information can be improved enormously with only small amount of hash data. Therefore, the proposed method gains considerable coding efficiency. Results of our experiment have verified average PSNR gain up to 1 dB, when compared to the well-known DVC codec, known as DISCOVER codec.