• Wind and Structures
• /
• 제9권1호
• /
• pp.75-93
• /
• 2006

This paper presents a quasi-steady model of vibrations of two cylinders in a side-by-side arrangement. The cylinders have flexible support and equal diameters. The model assumes that both cylinders participate in the process of vibration, each of them having two degrees of freedom. The movement of cylinders is described by a set of four non-linear differential equations. These equations are evaluated on the basis of a numerical simulation and experimental data. Moreover many features of cylinder vibrations are found from numerical results and are described in this paper.

• 대한기계학회논문집B
• /
• 제36권1호
• /
• pp.55-60
• /
• 2012

본 연구는 탄성 지지된 두 원기둥이 병렬로 배열되어 있을 때의 유력 진동 특성을 실험적으로 연구한 것이다. 구체적으로 2 원기둥의 각 간격(L/D, L:2 원기둥의 최단 거리, D:원기둥 직경)에서의 유속 변화에 따른 유력 진동 특성을 조사했다. 그리고 원기둥의 유력 진동 발생 메커니즘을 규명하기 위해 강제 진동 장치로 유력 진동을 정확히 재현한 가시화 실험을 하여 원기둥 주변의 흐름 패턴을 조사했다. 그 결과, 병렬 배열된 2 원기둥 사이의 스위칭 플로우의 변화에 따라 유력 진동 특성도 4 개의 패턴으로 변하는 것을 알 수 있었다. 그리고 직렬, 대각선, 병렬 배열된 2 원기둥 중에서 가장 유력 진동이 발생하기 쉬운 배열은 병렬 배열임을 본 연구를 통해 알 수 있었다.

• 한국전산유체공학회지
• /
• 제12권4호
• /
• pp.61-67
• /
• 2007

Numerical simulation of laminar flow over two spheres in a side-by-side arrangement is carried out to investigate the effect of the inter-sphere spacing on the flow characteristics. The Reynolds numbers considered are 100, 250, and 300, covering the steady axisymmetric, steady planar-symmetric, and unsteady planar-symmetric flows in the case of a single sphere. Results show that the drag and lift coefficients and wake structures are significantly modified depending on both the Reynolds number and the spacing between the spheres. At Re=100, the flow is steady planar-symmetric irrespective of the spacing, but it shows some variation according to the spacing at Re=250 and 300. That is, the flow maintains planar symmetry of the single-sphere wake at large spacings, while it loses the symmetry at small spacings due to the generation of new asymmetric vortical structures. It is also shown that the drag and lift coefficients generally increase with decreasing inter-sphere spacing because the high pressure region is formed near the gap between the spheres.

• 한국전산유체공학회지
• /
• 제21권2호
• /
• pp.81-89
• /
• 2016

Numerical simulations are carried out for the fluid flow and particle transport around two nearby circular cylinders in a side-by-side arrangement. The present study aims to understand the effects of the particle Stokes number and the spacing between two cylinders on particle dispersion and deposition characteristics. Simulations are based on an Eulerian-Lagrangian approach where the motion of particles is calculated by a Lagrangian approach based on one-way coupling. Results show that the flow structure is very different depending on the cylinder spacing, eventually affecting the overall pattern of particle dispersion significantly. It is also found that particles with smaller Stokes number tend to be distributed more uniformly in the wake of two cylinders, being located even inside the vortex cores. Meanwhile, particle deposition is analyzed in terms of the deposition efficiency and deposition location. The deposition efficiency of particles strongly depends on the Stokes number, whereas it is slightly affected by the cylinder spacing. The deposition location gets wider as the Stokes number increases, and it becomes asymmetric about the center of each cylinder as the cylinders get close.

• 대한기계학회논문집B
• /
• 제37권4호
• /
• pp.359-366
• /
• 2013

본 연구는 두 원기둥의 유동에 기인한 진동에 관한 실험적 연구이다. 두 원기둥이 직렬 배열(${\alpha}=0^{\circ}$), 대각선 배열(${\alpha}=5^{\circ}$, $10^{\circ}$, $15^{\circ}$, $25^{\circ}$, $45^{\circ}$, $60^{\circ}$), 병렬 배열(${\alpha}=90^{\circ}$) 됐을 때 두 원기둥의 간격(L/D)과 유속을 변화 시켰을 때의 진동 특성을 조사했다. 그 결과 다음과 같은 결과를 얻었다. (i)직렬, 대각선, 병렬 배열된 두 원기둥에서 발생하는 유동에 기인한 진동의 패턴은 7 개 패턴이다. (ii)복수로 존재하는 두 원기둥의 유동에 기인한 진동은 서로 진동을 유발시킨다. (iii) 두 원기둥의 직렬, 대각선, 병렬 배열 중에 유동에 기인한 진동을 유발하기 가장 쉬운 배열은 병렬 배열이다. (iv) 모든 배열에서 두 원기둥의 간격변화에 따른 최대 진폭의 변화는 변동 양력 계수의 변화와 유사하다.

• Journal of Mechanical Science and Technology
• /
• 제18권10호
• /
• pp.1869-1879
• /
• 2004

The present study has numerically investigated two-dimensional flow over three circular cylinders in an equidistant side-by-side arrangement at a low Reynolds number. For the study, numerical simulations are performed, using the immersed boundary method, in the range of g* < 5 at Re= 100, where g* is the spacing between two adjacent cylinder surfaces divided by the cylinder diameter. Results show that the flow characteristics significantly depend on the gap spacing and a total of five kinds of wake patterns are observed over the range: modulation-synchronized (g* (equation omitted) 2), inphase-synchronized (g* (equation omitted) 1.5) , flip-flopping (0.3 < g* (equation omitted) 1.2) , deflected (g* (equation omitted) 0.3), and single bluff-body patterns (g* < 0.3). Moreover, the parallel and symmetric modes are also observed depending on g* in the regime of the flip-flopping pattern. The corresponding flow fields and statistics are presented to verify the observations.

• 대한기계학회논문집B
• /
• 제27권7호
• /
• pp.909-919
• /
• 2003

Two-dimensional flow over a pair of circular cylinders in a side-by-side arrangement at low Reynolds numbers has been numerically investigated in this study Numerical simulations are performed, using the immersed boundary method, for the ranges of 40$\leq$Re$\leq$160 and $g^{*}$＜5, where Re and $g^{*}$ are, respectively, the Reynolds number and the spacing between the two cylinder surfaces divided by the cylinder diameter. Results show that a total of six kinds of wake patterns are observed over the ranges: antiphase-synchronized, inphase-synchronized, flip-flopping, single bluff-body, deflected, and steady wake patterns. It is found that the characteristics of the flow significantly depends both on the Reynolds number and gap spacing, with the latter much stronger than the former. Instantaneous flow fields, time traces, flow statistics and so on are presented to identify the wake patterns and then to understand the underlying mechanism. Moreover, the bifurcation phenomenon where either of two wake patterns can occur is found at certain flow conditions.ons.

• 한국시뮬레이션학회논문지
• /
• 제21권4호
• /
• pp.25-33
• /
• 2012

무장헬기는 대 기갑 작전, 공중강습 작전 엄호, 수색 및 정찰을 위한 항공지원업무 등 다양한 임무를 수행한다. 대부분의 무장헬기의 경우 Tandem식의 조종 방식을 가지고 있지만 Side-by-Side 방식의 헬기 또한 개발되고 있다. 이러한 현재의 추세를 볼 때, 공격전용 헬기의 Tandem식의 임무절차가 아니라 Side-by-Side 헬기에 최적화 된 임무절차와 이에 따른 임무하중에 대한 연구가 필요하다. 본 연구에서는 이러한 절차를 분석하기 위한 헬기 시뮬레이터를 구축하고, 주요 헬기 임무 절차를 선별하여 실험계획법에 따라 여러 대안을 평가하였다. 평가를 위한 데이터는 임무수행시간 측정 데이터와 NASA-TLX를 기법으로 정/부조종사 임무하중을 측정한 데이터로, 각 데이터들의 상자그림과 데이터의 평균 및 분산을 살펴보아 어떤 임무절차의 대안이 효과적이고 공통적인 임무로는 무엇이 가능한지를 분석하였다. 이를 통해 임무효과에 최적화 된 임무수행절차를 수립하는 것에 목적을 두었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제27권1호
• /
• pp.49-56
• /
• 2003

The hydrodynamic interference between two circular cylinders in tandem and side by side arrangements was investigated by measuring of lift and drag on each cylinder. The time variations of interference lift and drag coefficients in each arrangement were observed at center-to-center pitch ratios of P/D=1.25 and 2.5 and Reynolds number of $Re=1.5\times10^4$. Average interference lift and drag coefficients were also observed at pitch ratios from P/D=1.25 to 2.5 and Reynolds number from $Re=1.5\times10^4$ to $1.5\times10^4$. The hydrodynamic interference between two circular cylinders differed with the shape of the arrangement and the pitch ratio, but the characteristics were revealed by measuring of lift and drag on each cylinder.

• 대한기계학회논문집B
• /
• 제29권9호
• /
• pp.1032-1041
• /
• 2005

This study is performed to investigate the heat transfer characteristics of heat exchanger according to the arrangement of fins as well as fin configuration by using the four times enlarged model. Friction factor, Colburn j factor and goodness factors are compared to each other to estimate performance of each case for 4 different kinds of fins, which are plain, single side slit, double side slit and louver fin. Results show that heat transfer would be altered by fin arrangement and that friction loss is more affected by fin configurations than by the fin arrangements. In particular, heat transfer depends more on the shape of front row than that of rear row. The heat transfer rate of combined fin arrangement increases a lot more under the same pressure drop than that of conventional fin arrangement. This indicates that the heat exchanger of higher efficiency would be designed by the proper combination of fins, of different shapes.