• The Journal of Korean Physical Therapy
• /
• v.14 no.1
• /
• pp.75-88
• /
• 2002

The purpose of this study was to investigate the influence of anterior, posterior, and lateral pelvic tilt exercise upon the gait characteristics of patients with hemiplegia including their gait velocity, cadence, stride length, step length of the non affected side, step length of the affected side, foot angle of the non affected side, foot angle of the affected side, base of support, and so on. The subject of this study was 24 men and women patients with hemiplegia. The patients, the subject of this study, were classified into 12 patients of treatment group applying pelvic tilt exercise using visual feedback and 12 patients of control group applying general pelvic tilt exercise, and then analyzed their gait before and after exercise. Temporal distance gait analysis (Boening, 1977) was used to analyze their gait, and ink foot-print was applied as on of measurement methods. To find out meaningful difference between control group and treatment group, this study carried out independent sample t-test for each item by utilizing SPSS/Win 10.0, compared changes in control group's and treatment group's gait characteristics before and after exercise as percentage, and applied paired t-test to conduct before-after test in same group. Statistical significance level was ${\alpha}$ < 0.05. The results of this study were as follows. As a result of independent sample t-test for control group's and treatment group's gait characteristics after exercise, it was not statistically significant so there was no meaningful difference between two groups. However, it was statistically significant in the change rate(%) of gait characteristics, and treatment group's patients with hemiplegia had been highly changed in gait characteristics in comparison with control group. From the above-mentioned results, could find that pelvic tilt exercise using visual feedback for patients with hemiplegia was effective to improve their gait ability and it could increase the ability in comparison with general pelvic tilt exercise. In the future, studies on the effect of pelvic tilt exercise using visual feedback shall be continued based on more quantitative methods.

• Journal of the Korean Society of Physical Medicine
• /
• v.9 no.3
• /
• pp.315-324
• /
• 2014

PURPOSE: This study aimed to determine the correlation of weight bearing ability at the affected side with balance and gait abilities for the development of pressure biofeedback based equipment to stroke patients. METHODS: This study included 35 patients with stroke patient. The tests were conducted to determine the weight bearing ratio while pushing a step forward the affected side, static balance ability using the total length of COP(Center of pressure), sway velocity of COP, COP velocity at the X and Y axis. Functional reaching test (FRT), berg balance scale (BBS) were used to assess the dynamic balance ability and timed up and go test (TUG), 10m walk test (10mWT) were used assess the gait ability respectively. In order to determine the correlation between measured variables, bivariate correlation analysis was conducted. RESULTS: A significant correlation of the weight bearing ratio were shown with COP total length and velocity(r=-.34), Y-axis velocity(r=-.39), FRT(r=.42), BBS(r=.54), TUG (r=-.39), and 10m walking test (r=-.42). CONCLUSION: This study result showed that as patients with stroke had more weight bearing ratio at the affected side, not only their static and dynamic balance abilities increased more but also functional gait ability improved more. These results mean that, to improve stroke patients' static, dynamic balance ability and gait ability, weight bearing training with the affected side foot placed one step forward necessary for gaits are important.

• Journal of Korean Physical Therapy Science
• /
• v.10 no.1
• /
• pp.7-17
• /
• 2003

The purpose of this study was to investigate the effect of the involved lower limb weight bearing training on symmetrical weight supporting rate improvement and gait characteristics of patients with hemiplegia including their gait velocity, cadence, stride length, step length of the non affected side, step length of the affected side, foot angle of the non affected side, foot angle of the affected side, base of support, and so on. The subject of the study was 28 men and women patients with hemiplegia from 22 to 77 age, among patients who doctor diagnosed as hemiplegia due to stroke or traumatic brain injury, were possible to do independent gait more than 45m without others assistance, the flexion contracture of hip pint was less than $15^{\circ}$, did not have contracture for knee pint and one more than $5^{\circ}$ for ankle joint, did not have contraindication for exercise or gait did not show visual defect due to brain injury. The patients, the subject of the study, were classified into 14 patients of treatment. group applying continuous involved weight bearing with general therapeutic exercise and 14 patients of control group applying general therapeutic exercise, and then analyzed their gait before and after exercise. Temporal distance gait analysis(Boening, 1977) was used to analyze their gait, and ink foot-print was applied as one of measurement methods. However, it was statistically signifiant in the change rate(%) of gait characteristics, and treatment group's patients with hemiplegia had been highly changed in gait characteristics in comparison with control group. From the above-mentioned results, could find that continuous involved weight bearing training for patients with hemiplegia was effective to improve their gait ability and it could increase the ability in comparison with general exercise.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.20 no.6
• /
• pp.83-90
• /
• 2016

Ramjet mode combustion test was performed for a dual-mode ramjet engine model. The engine model consists of an air intake, a combustor and a nozzle. The combustor in the model has a large backward-facing step, designed to be used as a part of a rocket-based combined cycle engine. The test was performed at the flight speed of Mach 5 and the altitude of 24 km. Strong combustion was established only when the fuel was injected from both of the bottom-side and cowl-side wall. When the total fuel stoichiometric ratio was 1.0, distributed as 0.5 on the cowl side and 0.5 on the bottom side, the flow became subsonic at some portion in the combustor by thermal choking, i.e., ramjet mode was established for this condition.

• Journal of Environmental Impact Assessment
• /
• v.21 no.5
• /
• pp.813-821
• /
• 2012

Environmental and public health concern for the emission of air pollutants from burn-up process in waste incineration plants located in the vicinity of living environment was increased during the past decade. The purpose of this study was to suggest of the simple and rapid method of priority setting model for the decision of full-scale public health assessment. This method was consists of total 5-step. Step 1 was "secure the satellite map" and we can use the satellite map which serves from the website such as NAVER Co. Step 2 was "drawing mesh on the map" for catch the point of occupation of environmental sensitivity facilities, and step 3 was "identification and sorting of the facilities", Step 4 was "setting of weight" using the "weighted linear combination (WLC) method". Finally, all facility was sorted by score. As a result, we can set a priority of 145 facilities based on 177 facilities which managed in local government. Facilities in Seoul metropolitan area was high rank in priority list. On the other side, Facilities located at the country or rural area was low rank because of low occupation of the house and the environmental sensitivity facilities such as kindergarten, elementary school, and hospital. In this study, we suggested simple and rapid method that using for screening procedure of public health assessment.

• Journal of Ocean Engineering and Technology
• /
• v.11 no.4
• /
• pp.213-220
• /
• 1997

In this study, a design for a shape of centrifugal pump impeller has been performed using a p.c. under a Windows environment. Interaction between a user and a computer has been easily established using the Visual Basic. In determining an outer diameter of an impeller, steps are divided into two, a basic computational step and a refinment step. In this way user can enter his/her experience at the refinment step and hence can expect to lessen the nonlinear nature inherent to the design. In determining a shape of a side view of an impeller, the Bezier cubic curve has been used, and it can be seen that the Bezier cubic curves are well suited in the shape design under a Windows environment. By simply manipulating the four control points, one can generate various cubic curves among which one is selected. Also, a simple method, which can determine the curved position of an impeller vane, has been developed. These data can be used for final CAD drawings.

• Journal of Multimedia Information System
• /
• v.6 no.1
• /
• pp.15-22
• /
• 2019

There are many ways to perform face recognition. The first step of face recognition is the face detection step. If the face is not found in the first step, the face recognition fails. Face detection research has many difficulties because it can be varied according to face size change, left and right rotation and up and down rotation, side face and front face, facial expression, and light condition. In this study, facial features are extracted and the extracted features are geometrically reconstructed in order to improve face recognition rate in extracted face region. Also, it is aimed to adjust face angle using reconstructed facial feature vector, and to improve recognition rate for each face angle. In the recognition attempt using the result after the geometric reconstruction, both the up and down and the left and right facial angles have improved recognition performance.

• 대한정형외과스포츠의학회:학술대회논문집
• /
• 2004.09a
• /
• pp.5-5
• /
• 2004

• Transactions of Materials Processing
• /
• v.8 no.1
• /
• pp.7-13
• /
• 1999

In this study, side panels were developed using the laser-welded tailored blank (T.B.) of both the same thickness and different thickness. At first, the formability of the same thickness T.B. was investigated to compare with one of the non-welded panel with respect to weldline movement and strain distribution in blank during the stamping process. Based on these results, we determined the weld line positions and the die step for T.B. forming of the blanks composed of different thickness combination. Then we made some stamping tryouts with selected types of blanks to investigate the formability of T.B. of the different thickness. During the tryouts, wrinkles were found in the a-pillar lower region which is under the deformation mode of the shrink flange. In the b-pillar region, fractures were also found. These defects have been reduced and corrected by controlling the blank design, the die faces and process parameters.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.23 no.3
• /
• pp.561-566
• /
• 2013

We propose an efficient exponentiation method which is resistant against some side channel attacks in $T_2(p)$, Torus-Based-Cryptosystem. It is more efficient than the general exponentiation method in $T_2(p)$ and is resistant against SPA by using that the difference of squaring and multiplication costs is negligible. Moreover, we can randomize a message in exponentiation step using the characteristic of quotient group which naturally protects against the first DPA.