• Clinics in Shoulder and Elbow
• /
• 제25권3호
• /
• pp.188-194
• /
• 2022

Background: Medial elbow laxity develops in throwing athletes due to valgus forces. Medial elbow instability in professional, collegiate, and high school athletes is well documented; however, the medial elbow of young throwing athletes has received less attention. This study investigated the medial elbow and common flexor tendon during applied elbow valgus stress of youth baseball players. Methods: The study included 15 participants. The medial elbow width and thickness of the common flexor tendon were measured on ultrasound images. Results: No significant side differences in medial elbow width or common flexor tendon were found at rest or under applied valgus stress. At rest, the medial elbow joint width was 3.34±0.94 mm on the dominant side and 3.42±0.86 mm on the non-dominant side. The dominant side increased to 3.83±1.02 mm with applied valgus stress, and the non-dominant side increased to 3.96±1.04 mm. The mean flexor tendon thickness was 3.89±0.63 mm on the dominant side and 4.02±0.70 mm on the non-dominant side. Conclusions: These findings differ from similar studies in older throwing athletes, likely because of the lack of accumulated stress on the medial elbow of youth throwing athletes. Maintaining elbow stability in young throwing athletes is a vital step to preventing injury later in their careers.

• 전기의세계
• /
• 제29권11호
• /
• pp.733-741
• /
• 1980

A novel six-step current source inverter (CSI) with DC-side commutation and energy rebound capability is presented with detailed explanation of the circuit operation. The prposed inverter can operate in a very wide range of frequency and load variation by employing DC-side commutation. Also, the energy rebound makes the use of low voltage SCR's possible and increases the inverter efficiency. Motor operation is also possible in four quadrants in this proposed current source inverter. The advantages of the proposed CSI over conventional ones are described and experimental results are given in oscillograms.

• 한국수학사학회지
• /
• 제14권1호
• /
• pp.17-26
• /
• 2001

Ri, Sang-Hyeok(1810-\ulcorner) explained in detail and repeatedly solution of problems which find the area and diameter of inscribed and circumscribed circles of regular polygons from a side and find a side of regular polygons from the area of the book Su-Ri-Jeong-On in the chapter ‘Gak-Deung-Byeon-Hyeong-Seup-Yu’ of his book San-Sul-Gwan-Kyeun. The explanation of each question describes the procedure to make the equation in detail, but only presents the solution with few step to solve.

• 소성∙가공
• /
• 제24권6호
• /
• pp.400-404
• /
• 2015

For mass production of stamped parts, which require complicated in-press operations, it is always advisable to use a progressive die set. It is difficult to choose a progressive die set if the stamped parts need to be deep drawn and especially if they are unsymmetrical. Because unsymmetrical deep drawing parts are very sensitive to the effect of weight during moving to the next step, they are hard to exactly locate on the die face. An automotive seat side cushion panel is about 80mm high, unsymmetrical and its low edge needs hemming, so it is hard to produce even using a progressive die set. In the current paper a progressive stamping for seat side cushion panel was examined. Five strip bridges were considered to be strong enough to move to the next die as predicted by the CAE analysis.

• 한국세라믹학회지
• /
• 제48권4호
• /
• pp.263-268
• /
• 2011

ZnO hexagonal rods grown in aqueous solution can be changed into a tubular shape by two-step aging in the course of the growing process. In the first step, hexagonal ZnO rods is grown by aging at $90^{\circ}C$ under a highly supersaturated aqueous solution giving rise to a fast precipitation rate. Meanwhile, during the second step aging at $60^{\circ}C$ in the same aqueous solution, the hexagonal polar face (001) having higher surface energy than (010) side planes dissolves to minimize surface energy. Hence the flat (001) face changes to a craterlike face and the hexagonal rod length of ZnO decreases at an initial-stage of this step aging. The formation of the (101) wedge-type faces is ascribed to the resultant of competitive reactions between the dissolution of polar face minimizing the surface energy which is a dominant reaction at the initial stage and the precipitation reaction dissipating supersaturation. At a later stage of the second-step the reaction rates of these two processes in the aqueous solution become similar and the overall reaction is terminated.

• 대한전자공학회논문지
• /
• 제24권1호
• /
• pp.91-96
• /
• 1987

Plasma etching can obtain less damaged etch surface than reactive ion etching. This study was performed to get anisotropic etching characteristics of Si using two step etching technique with C2CIF5 and SF6 gas mixture. The results show that the etch rate and aspect ratio of silicon was increased with increment of SF6 contents. The bulging phenomenon on trench side wall in the plasma one-step etching technique was eliminated by the two step etching technique. The anisotropy was decreased from 12(at 120m Torr) to 2.2(at 400m Torr) with increasing the chamber pressure. At the low rf power (350 watts) anisotrpy of silicon was obtained 7 lower than that of high rf power (650 watts. A:~9). In Summary we obtained anisotropic etching profiles of silicon with e 6\ulcornerm depth by using the plasma two-step etching technique.

• 한국과학교육학회지
• /
• 제34권5호
• /
• pp.469-478
• /
• 2014

본 연구에서는 학생들이 과학과 과학자에 대한 이미지를 다양화하기 위해 과학자들의 인간적인 면이 드러난 에피소드를 활용한 '과학자의 희로애락 프로그램'을 개발해 학생들의 반응을 파악했다. 과학자의 다양한 이미지를 학습자에게 제공함으로써 과학자에 대한 이미지가 어떻게 다양해졌는지, 자신의 과학 학습과 진로에 어떻게 영향을 주었는지 살펴보았다. 프로그램은 과학자의 희로애락 관련 총 5개 주제, 10차시로 구성되었고, 20명의 고등학생들이 참여했으며 이 중 5명의 수업 전후 조사지, 수업 중 상호 작용, 활동지 자료, 면담 자료, 수업현장 노트 등을 심층 분석했다. 과학자의 인간적인 면을 나타내는 수업의 흐름은 먼저 과학자에 대한 이미지 떠올리기, 과학사 에피소드 읽기, 과학자의 인간적 측면 탐색하기, 과학자의 상황 공감하기, 과학자의 인간적 측면 평가하기 등의 단계로 구성되었다. 프로그램에 참여한 학생들은 과학자도 감정을 가진 평범한 사람이라는 것을 알게 되었고, 과학자에게 친밀감을 느끼게 되었으며, 과학자가 될 수 있다는 자신감도 갖게 되었다. 학생들이 과학자의 다양한 측면을 이해하게 됨으로써 과학과 과학자에 대해 더 큰 지지를 보낼 수 있는 과학적 소양을 갖추게 될 것으로 기대된다.

• Journal of Electrical Engineering and Technology
• /
• 제11권2호
• /
• pp.300-308
• /
• 2016

Application of demand-side resources to automatic generation control (AGC) has a great significance for improving the dynamic control performance of power system frequency regulation. This paper investigates the possibility of providing regulation services by demand-side energy storage in electric vehicle battery swapping stations (BSS). An interaction framework, namely station-to-grid (S2G), is presented to integrate BSS energy storage into power grid for giving benefits to frequency regulation. The BSS can be regarded as a lumped battery energy storage station through S2G framework. A supplementary AGC method using demand-side BSS energy storage is developed considering the vehicle user demand of battery swapping. The effects to the AGC performance are evaluated through simulations by using a two-area interconnected power grid model with step and random load disturbance. The results show that the demand-side BSS can significantly suppress the frequency deviation and tie-line power fluctuations.

• Physical Therapy Rehabilitation Science
• /
• 제2권2호
• /
• pp.104-110
• /
• 2013

Objective: The purpose of this study was to investigate the effects of intensive gait training with body weight support treadmill training on gait and balance in stroke disability patients. Design: Randomized controlled trial. Methods: Twenty-six stroke patients (20 men and 6 women) participated in this study. All subjects were hospitalized patients. They were randomly divided into two groups: the experimental group (body weight supported treadmill training group, n=14) and control group (treadmill group, n=12). The mean ages were 52.07 years (experimental group) and 53.83 years (control group). Subjects in both groups received conventional training 10 times/wk. Subjects in the experimental group practiced body weight supported treadmill training for 30 minutes a day, 3 day/wk. Subjects in the control group practiced treadmill training for 30 minutes. The Berg Balance Scale (BBS) and GAITRite were used to evaluate balance and gait parameters (step length, cadence and gait speed) before and after the intervention. Results: BBS scores in the experimental group showed significantly greater improvement ($4.33{\pm}1.54$), compared with the control group (p<0.05). Significantly greater improvement in the gait speed ($24.13{\pm}4.53$ cm/s), affected side step length ($10.40{\pm}3.42$ cm), sound side step length ($11.97{\pm}3.29$ cm), and cadence ($23.88{\pm}5.52$ step/min), compared with the control group (p<0.05). Conclusions: Intensive gait training with Body Weight Support Treadmill Training may improve gait and balance in subacute stroke.

• 한국컴퓨터정보학회논문지
• /
• 제29권5호
• /
• pp.123-129
• /
• 2024

구급대원에게 심폐소생술은 매우 중요하나 이동하는 주들것에서 수행하는 가슴압박은 정확도가 떨어진다. 이 연구의 목적은 이동 중 주들것에서 수행하는 심폐소생술 효과를 높이기 위하여 C-step을 이용하여 주들것의 측면에서 가슴압박을 수행하는 것과 환자의 복부 위에 위치하여 가슴 압박을 수행하는 것에 대하여 차이를 알아보고자 수행되었다. 연구는 C-step 군 20명과 복부 위군 20명을 대상으로 이동 중 주들것에서 2분간 연속된 가슴압박을 수행하였다. 연구결과 C-step을 적용한 군에서 적정한 깊이(t=4.132, p=.000)와 속도(t=7.177, p=.000)를 나타내었으며 정확도가 더 높은 것으로 나타났다(t=6.774, p=.000). 또한 C-step을 적용한 군에서 위치불량(t=-5.197, p=.008)과 너무 얕은 오류가 적은 것으로 나타났다. 결론적으로 C-step을 장착한 주들것에서의 가슴압박은 심폐소생술의 질을 높이고 병원 전 환자의 생존율을 높이는데 도움을 줄 것으로 판단된다.