• International Journal of Precision Engineering and Manufacturing
• /
• 제8권3호
• /
• pp.14-19
• /
• 2007

Rapid prototyping (RP) technology can fabricate any 3D physical model regardless of geometric complexity using the layered manufacturing (LM) process. Stereolithography (SL) is the best-known example of RP technology. In general, the surface quality of a raw SL-generated part is unsatisfactory for industrial purposes due to the step artefact created by the LM process. Despite of the increased number of applications for SL parts, this side effect limits their uses. In order to improve their surface quality, additional post-machining finishing, such as traditional grinding, is required, but post-machining is time consuming and can reduce the geometric accuracy of a part. Therefore, this study proposes a post-machining technology combining coating and grinding processes to improve the surface quality of SL parts. Paraffin wax and pulp are used as the coating and grinding materials. By grinding the coating wax only up to the boundary of the part, the surface smoothness can be improved without damaging the surface. Finally, moulding and casting experiments were performed to confirm the suitability of the SL parts finished using the proposed process with rapid tooling (RT) techniques.

• 지역연구
• /
• 제8권1호
• /
• pp.99-118
• /
• 1992

In spite of the rapid development of information and computer technology, the software side of those technologies has not been well studied especially in the area of regional planning. Throughout this study we identified some critical facts as below: 1) the necessity of region-specific information which is vital for urban and regional development, 2) the necessity of integration of information system into a regional unit rather than setoral unit, 3) aggravated regional inequality through the spread of communication and computing tools, and 4) advanced regional information system linking satellite and graphic computers in developed countries. From these facts, we recommend some policy directions as below: 1) It is desperately needed to establish a regional information center covering large administrative area. 2) In establishing these system, we can utilize existing communication network or estblish a brand new system. Utilization of existing administrative network and board of statistics for data collection and management, and the utilization of postal office or telephone company for distribution are recommended through the evaluation of those two alternatives, 3) It is also recommended that one-step data collection system should be established. 4) The Dat Base should be organized in many steps in close relationship with development goal and planning process. In order to make most use of this system, we need to develop a monitoring system, regional indicators and ex-ante impact studies.

• The Journal of Korean Physical Therapy
• /
• 제23권3호
• /
• pp.57-63
• /
• 2011

Purpose: The purposes of this study were to investigate the effectiveness of Pilates exercise on Fitness Factors related to motor performance including flexibility, agility, power, balance, and muscle endurance. Methods: Forty subjects were randomly allocated to one of two groups. The Pilates group did Pilates exercises 3 times a week for 8weeks, 60 minutes each time, and submitted to evaluation of protocols to assess sitting and reaching tests, a standing broad jump test, a side step test, a balance test using a Biodex Stability System, and muscle endurance using CSMI. Results: The Pilates group (n=20) participated in Pilates exercises three times in a week for eight weeks. The results show significant post-test differences in the Pilates group in the following areas: flexibility, agility, power, balance and muscle endurance. There was no significant increase in the control group. Post-exercise, there was no significant difference between the Pilates and control group. Conclusion: The Pilates method can offer significant improvement in personal flexibility, agility, power, balance, and muscle endurance. This study suggests that individuals can improve their Fitness Factors related to motor performance using Pilates exercises that do not require equipment or a high degree of skill. Further study is required to quantify the benefits of Pilates exercise.

• 수산해양기술연구
• /
• 제21권2호
• /
• pp.89-98
• /
• 1985

As a primary step in studying the effects of the netting porosity on the net-shape in the four-seam trawling net, a series of experiments were performed changing the porosity of each panel, with the simplified mo:iel of the bag net made of porous vinyl film and that ma:ie of net webbing. These models were suspended horizontally in circularly flowing water, with two pairs of susp~nding threais to four points of symetry at the border of the bag mouth in place of both wing nets. And then, the section shape of the bag mouth photographed and the tensions on both pairs of suspending threads were measured with two load cells in circularly flowing water. From the results, the auther estimated an experimental equation from the relationship between the porosity of each panel in the bag net and the section shape of the bag mouth, h/w=k (l-Pr_u/lPr_s)

• 한국산학기술학회논문지
• /
• 제13권5호
• /
• pp.2414-2419
• /
• 2012

본 논문에서는 물 재이용 펌프 시스템의 에너지 효율적 운전 방법을 제안한다. 1시간 단위의 시간대에서 최적운전제어를 위해 예측구간 스위칭방법과 선형계획법을 적용하고 에너지 비용은 경부하, 중부하, 그리고 최대부하를 포함한 TOU 요금과 피크요금을 통해 산정하도록 한다. 물 재이용 펌프시스템에서의 최적운전은 TOU 요금과 피크요금을 포함한 에너지 비용을 최대로 줄일 수 있도록 수행한다. 시뮬레이션을 통해 제안한 최적운전방법을 적용하면 많은 전력 에너지 비용의 절감과 전력계통의 안정성 향상을 확인할 수 있다.

• 한국컴퓨터정보학회논문지
• /
• 제16권8호
• /
• pp.19-27
• /
• 2011

과거 접근제어에 대한 연구는 효율적인 측면보다 안전성에 더 많은 초점이 맞추어져 있었다. 본 연구는 배터리나 메모리 등의 자원이 제약적인 개인 휴대용 단말기와 같은 환경에서 XML 데이터 스트림의 효율적이고 안전한 질의처리에 대한 방법을 제안한다. 특히, 본 연구는 접근제어 처리과정에서 발생할 수 있는 추가적인 오버헤드를 각 질의처리 단계별로 찾아내고 최소화하여, 자원의 사용을 최적화하며 안전한 결과를 얻기 위한 최소한의 오버헤드를 갖는 접근제어 처리 방법을 제안한다. 끝으로, 실험을 통해 본 연구에서의 제안방법에 대한 우수성 분석을 하였다.

• 한국농공학회논문집
• /
• 제55권6호
• /
• pp.37-46
• /
• 2013

Many factors about the stability for the reservoir embankments is determined when the facility is completed. Therefore the initial design of the embankment is important. Many researchers focused the effect of soil parameters although the cross section greatly affects the stability and can be controlled in design step. The objective of this research is to analysis of the effects for the safety factor of slope and seepage according to change cross-section in embankment. As a result, the quantity of seepage decreased as the gradient of downstream slope decreased and was proportional to the height of embankments. There was a linear relationship between the gradient of slope and the safety factor of slope. However the gradient of slope did not affect other side slope. All in a relationship, regressive equations with a high correlation coefficient were calculated and can be applied the simple estimation method of the stability using the cross-section. As results of analyzing the sensitivity, the friction angle and permeability critically effect for the slope stability and the seepage, respectively. The effect of the slope gradient was similar to major soil properties.

• Bulletin of the Korean Chemical Society
• /
• 제32권3호
• /
• pp.768-778
• /
• 2011

Calixpyrroles and related macrocycles are non-planer synthetic anion receptors that have attracted considerable attentions in recent years. Although the synthesis of calix[4]pyrrole (known as meso-octamethylporphyrinogen) was reported more than 100 years ago, the anion binding properties were first discovered in 1996. The simple calix[4]pyrroles can be synthesized in single step in high yield by condensation of pyrrole with acetone. The compounds showed preferential binding for halide anions including fluoride, phosphate, carboxylate, and chloride in organic media. Efforts to improve the anion affinity of calix[4]pyrrole and to enhance its selectivity have led to the synthesis of a variety of new calixpyrrole derivatives. Among the various modifications, introduction of straps on one side of the calix[4]pyrroles are the most effective. Incorporation of aromatic rings other than pyrroles also exhibited interesting binding behaviour. Introduction of signalling units as part of the strapping element enable to detect the anions on chromogenic or fluorogenic fashion. Finding of the anion transport properties across the membrane and cytotoxic effects of the calix[4]pyrroles open new window for calixpyrrole-related research. The polymer-incorporated systems have also been employed as anion complexants in solvent-solvent extraction. These old, yet easy-to-make macrocycles have well advanced more recently with the discovery of the ion-pair complexation properties. In this review, the synthetic developments and anion binding properties of calixpyrroles for the last decades will be discussed and will cover the advances in calixpyrrole chemistry.

• Archives of Pharmacal Research
• /
• 제28권8호
• /
• pp.988-994
• /
• 2005

The purpose of the present study was to prepare multivesicular liposomes with a high drug loading capacity and to investigate its potential applicability in the oral delivery of a peptide, human epidermal growth factor (rhEGF). The multivesicular liposomes containing rhEGF was prepared by a two-step water-in-oil-in-water double emulsification process. The loading efficiency was increased as rhEGF concentration increased from 1 to 5mg/mL, reaching approximately $60\%$ at 5 mg/mL. Approximately $47\%$ and $35\%$ of rhEGF was released from the multivesicular liposomes within 6 h in simulated intra-gastric fluid (pH 1.2) and intra-intestinal fluid (pH 7.4), respectively. rhEGF-loaded multivesicular liposomes markedly suppressed the enzymatic degradation of the peptide in an incubation with the Caco-2 cell homogenate. However, the transport of rhEGF from the multivesicular liposomes to the basolateral side of Caco­2 cells was two times lower than that of the rhEGF in aqueous solution. The gastric ulcer healing effect of rhEGF-loaded multivesicular liposomes was significantly enhanced compared with that of rhEGF in aqueous solution; the healing effect of the liposomes was comparable to that of the cimetidine in rats. Collectively, these results indicate that rhEGF-loaded multivesicular liposomes may be used as a new strategy for the development of an oral delivery system in the treatment of peptic ulcer diseases.

• Journal of Magnetics
• /
• 제21권2호
• /
• pp.173-178
• /
• 2016

Six-step commutation control widely used in brushless DC (BLDC) motor can be applied to consequent pole permanent magnet (CPPM) belt starter generator (BSG) with trapezoidal back electromotive force (EMF) in the starter state. However, rotor position detection with three Hall sensors in BLDC motor can hardly be employed in CPPM BSG due to asymmetric flux distribution in each pole side of CPPM BSG. This paper presents a low-cost rotor position detection method for CPPM BSG in which six Hall sensors are proposed to be used based on the analysis of flux distribution by 3D FEA. In the method, the six Hall sensors are divided into three groups and two signals in each group are combined through performing logic operations. In addition, offset angle between back EMF and the related Hall signal can be compensated by moving the Hall sensors. Experiments of a 2 kW CPPM BSG prototype have also been performed to verify the proposed method.