• 대한기계학회논문집B
• /
• 제26권4호
• /
• pp.578-586
• /
• 2002

Flow structures around a rectangular prism have been investigated by using a PIV(Particle Image Velocimetry) technique. A thick turbulent boundary layer was generated by using spires arid roughness elements. The boundary layer thickness, displacement thickness and momentum thickness were 650mm, 117.4mm and 78mm, respectively. The ratio between the model height(40mm) and the boundary layer thickness H/$\delta$, was 0.06. The Reynolds number based on the free stream velocity and the height of the model was 7.9$\times$10$^3$. The PIV measurements were performed at three different wall normal planes. Three recirculation regions at forward facing step, top of the roof and backward facing step are clearly seen and show three dimensional features. Dramatic changes of flow patterns are observed in the wake regions in the different spanwise wall normal planes. Instead of reattachment and recirculation zone, rising streamlines are depicted at the normal planes near the side wall due to the interaction with a rising horse shoe vortex. The peak of turbulent kinetic energy occurs at the separation bubble on top of the roof and the magnitude is 2.5 times higher compared with that of the wake region.

• 한국식품조리과학회지
• /
• 제23권3호통권99호
• /
• pp.378-387
• /
• 2007

In this study, we investigated the application of HACCP for a prepared side dish of sweet potato stems, within a free meal service system for the elderly in the Sungnam area. Total bacterial counts (TBC) and levels of coliforms and Esherichia coli (E.coli) were analyzed through an eight step cooking process. The TBCs of the raw samples ranged between 3.30 and 1.37${\times}10^4$ CFU/g per 100 cm$^2$ The trimmed, blanched, and drained sweet potato stems showed a mean TBC value of 1.37${\times}10^4$ CFU/g, and the level of coliforms was 1.48${\times}10^3$ CFU/g. Among the eight samples, however, after stir-frying and serving, the TBC decreased to a standard satisfactory level, and a coliforms and E. coli were not found. A five step process was used and samples were taken to check the microbial quality of the cook and cooking equipment. Here we tested for TBC, coliforms, Staphylococcus aureus (S. aureus), and Salmonella. Specifically, the TBC and number of coliforms were examined on the cook's hand's, cutting board, and knife, as they represented hazards for cross-contamination. The three inspection steps of preparation of the trimmed, rinsed, blanched, and drained sweet potato stems, cook's' hands, cutting board and knife were all considered CCPs, and a manual of cooking process management was established to improve the risk factors in this study. In conclusion, this study reinforces that microbiological analysis is as a valuable tool for checking what points and stages of the cooking process must be controlled.

• 한국멀티미디어학회논문지
• /
• 제9권1호
• /
• pp.101-108
• /
• 2006

현재 인터넷에서 서비스되고 있는 네트워크 게임을 개발하는 경우, 개발 인원과 시간이 많이 투입되는 프로젝트이기 때문에, 게임 제작 시 기존에 작성되어 있는 코드를 재사용이 가능하도록 설계하는 것은 중요한 일이다. 게임에 사용되는 데이터베이스는 많은 클라이언트들이 접근하는데, 자원의 효율적인 관리를 위해서, 데이터베이스의 접근횟수를 최소화하고 데이터를 효율적으로 처리할 수 있는 API(application program interface) 설계가 필수적이다. 이러한 문제를 해결하기 위해 관련 소프트웨어 모듈의 객체지향적인 설계가 필요하다. 본 논문에서는 데이터베이스 자원을 다루는데 필요한 효율적인 API 구현을 위해 GoF(gang of four)의 디자인 패턴을 제안한다. 몇 개의 게임 GUI(graphical user interface) 분석을 통해 설계된 데이터베이스는 일반적인 데이터베이스 설계 단계에서 설계의 검토 및 수정을 최소화하여 최적화된 스키마 집합을 빠른 시간에 생성할 수 있다는 장점이 있고, 이것을 기초로 데이터베이스 서버 측 API 설계에 GoF의 디자인 패턴을 적용함으로써 게임 서버와 데이터베이스의 호출 횟수가 실질적으로 감소하고, 개발된 API를 손쉽게 유지보수 할 수 있으며, 새로운 API의 추가가 쉽다는 장점이 있었다.

• Journal of Korean Neurosurgical Society
• /
• 제30권10호
• /
• pp.1187-1192
• /
• 2001

Objective : The lateral extracavitary approach(LECA) to the thoracolumbar spine is known as one of procedure which allows not only direct vision of pathologic lesion, but also ventral decompression, and dorsal fixation of the spine through the same incision. However, some drawbacks of LECA, including the technically- demanding, time-consuming, unfamiliar surgical anatomy and excessive blood loss, make surgeons to hesitate to use this approach. This study is to provide the surgical anatomy of LECA using cadavers, for detailed informations when LECA is considered for the surgery. Methods : We performed the 10 cadaveric studies, 7 male and 3 female, and careful dissection was carried out on right side of thoracolumbar region, except one for thoracic region. The photographs with micro-lens were taken to depict the close-up findings and for demonstrating detailed anatomy. Results : The photographs and hand-drawings demonstrated the relationships among the musculature, segmental vessels and nerve roots seen during each dissection plane. The lateral branches of dorsal rami of spinal nerve and the transverse process were confirmed to be the most important landmark of this approach. Conclusion : We concluded that detailed anatomical findings for LECA through this step-by-step dissection would be useful during operative intervention to reduce the intraoperative complications in LECA.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.178-178
• /
• 2010

With the scaling down of ULSI(Ultra Large Scale Integration) circuit of CMOS(Complementary Metal Oxide Semiconductor)based electronic devices, the electronic devices become more faster and smaller size that are promising field of semiconductor market. However, very narrow line width has some disadvantages. For example, because of narrow line width, deposition of conformal and thin barrier is difficult. Besides, proportion of barrier width is large, thus resistance is high. Conventional PVD(Physical Vapor Deposition) thin films are not able to gain a good quality and conformal layer. Hence, in order to get over these side effects, deposition of thin layer used of ALD(Atomic Layer Deposition) is important factor. Furthermore, it is essential that copper atomic diffusion into dielectric layer such as silicon oxide and hafnium oxide. If copper line is not surrounded by diffusion barrier, it cause the leakage current and devices degradation. There are some possible methods for improving the these secondary effects. In this study, TaNx, is used of Tertiarybutylimido tris (ethylamethlamino) tantalum (TBITEMAT), was deposited on the 24nm sized trench silicon oxide/silicon bi-layer substrate with good step coverage and high quality film using plasma enhanced atomic layer deposition (PEALD). And then copper was deposited on TaNx barrier using same deposition method. The thickness of TaNx was 4~5 nm. TaNx film was deposited the condition of under $300^{\circ}C$ and copper deposition temperature was under $120^{\circ}C$, and feeding time of TaNx and copper were 5 seconds and 5 seconds, relatively. Purge time of TaNx and copper films were 10 seconds and 6 seconds, relatively. XRD, TEM, AFM, I-V measurement(for testing leakage current and stability) were used to analyze this work. With this work, thin barrier layer(4~5nm) with deposited PEALD has good step coverage and good thermal stability. So the barrier properties of PEALD TaNx film are desirable for copper interconnection.

• 대한의용생체공학회:의공학회지
• /
• 제30권6호
• /
• pp.482-488
• /
• 2009

Conventional devices for transanal endoscopic microsurgery that are currently used clinically for intestine or rectal cancer patients have 40 mm external diameter of rectoscope tube - induces anal damage and long-term postoperative pain for small-sized patients. In this paper, we designed rectum and rectoscope models and calculated the changing trends of operation area of the surgical tools in accordance with the step-by-step variation of design parameters of the rectoscope tube - external diameter, axial length, and distal angle. Using the results of computer simulation, we suggested an optimal set of design parameters that minimizes external diameter of the rectoscope tube and at the same time, maintains similar operation area of the surgical tools compared with commercialized devices (${\geq}\;4274.7mm^2$). The results of the simulation showed that the optimal design parameters were 35 mm external diameter, 100 mm axial length, and $45^{\circ}$ distal angle of the rectoscope tube. This result can be applied to the development of endoscopic microsurgery device that can minimize side effects to the intestine or rectal cancer patients.

• 펄프종이기술
• /
• 제43권3호
• /
• pp.52-58
• /
• 2011

Proton-NMR spectroscopic method was applied to kinetic study of concentrated sulfuric acid hydrolysis reaction, especially focused on 2nd step of acid hydrolysis with deferent reaction time and temperature as main variables. Commercial xylan extracted from beech wood was used as model compound. In concentrated acid hydrolysis, xylan was converted to xylose, which is unstable in 2nd hydrolysis condition, which decomposed to furfural or other reaction products. Without neutralization steps, proton-NMR spectroscopic analysis method was valid for analysis of not only monosaccharide (xylose) but also other reaction products (furfural and formic acid) in acid hydrolyzates from concentrated acid hydrolysis of xylan, which was the main advantages of this analytical method. Higher temperature and longer reaction time at 2nd step acid hydrolysis led to less xylose concentration in xylan acid hydrolyzate, especially at $120^{\circ}C$ and 120 min, which meant hydrolyzed xylose was converted to furfural or other reaction products. Loss of xylose was not match with furfural formation, which meant part of furfural was degraded to other undetected compounds. Formation of formic acid was unexpected from acidic dehydration of pentose, which might come from the glucuronic acid at the side chain of xylan.

• Journal of Welding and Joining
• /
• 제25권3호
• /
• pp.57-63
• /
• 2007

Electrochemical migration characteristics of Pb-free solder alloys are quantitatively correlated with corrosion characteristics in harsh environment conditions. In-situ water drop test and corrosion resistance test for Sn-3.0Ag-0.5Cu solder alloys were carried out in NaBr and NaF solutions to obtain the electrochemical migration lifetime and pitting potential, respectively. Sn-3.0Ag-0.5Cu solder alloy shows similar ionization and electrochemical migration behavior with pure Sn because of Ag and Cu do not migrate due to the formation of resistant intermetallic compounds inside solder itself. Electrochemical migration lifetime in NaBr is longer than in NaF, which seems to be closely related to higher pitting potential in NaBr than NaF solution. Therefore, it was revealed that electrochemical migration lifetime of Sn-3.0Ag-0.5Cu solder alloys showed good correlation to the corrosion resistance, and also the initial ionization step at anode side is believed to be the rate-determining step during electrochemical migration of Pb-free solders in these environments.

• 한국구조물진단유지관리공학회 논문집
• /
• 제9권3호
• /
• pp.139-150
• /
• 2005

유한요소법을 이용하여 기둥단면이 직선형태로 변화하는 3경간 단층 골조의 두 고유치 (탄성임계하중과 횡방향 기본진동수)를 산정하였다. 수치해석에서 고려한 변수는 기둥의 taper 비 ($={\alpha}$), 경간대 층고비 ($={\beta}$), 보와 기둥의 단면2차 모멘트 비(=Y)이다. 또한 주각의 지지상태와 주두의 수평동(side-sway)유무가 고유치에 미치는 영향도 고려하였다. 하나의 연속함수로부터 고유치의 변화 추정이 가능한 대수 함수식을 제안하였다. 대수함수식의 변수는 수치해석에서의 변수 즉 ${\alpha}$, ${\beta}$ 및 Y 이다. 골조에 작용하는 축방향력의 크기를 점차 증가시켜 가면서 여기에 대응하는 진동수의 감소현상을 검토하였다.

• 한국태양에너지학회 논문집
• /
• 제31권1호
• /
• pp.107-114
• /
• 2011

Two-step thermochemical cycle using ferrite-oxide($Fe_3O_4$) device was investigated. The $H_2O$(g) was converted into $H_2$ in the first experiment which was performed using a dish type solar thermal system. However the experiment was lasted only for 2 cycles because the metal oxide device was sintered and broken down. Another problem was that the reaction was taken place mainly on a side of the metal oxide device. The $m-ZrO_2$, which was widely known as a material preventing sintering, was applied on the metal oxide device. The ferrite loading rate and the thickness of the metal oxide device were increased from 10.67wt% to 20wt% and from 10mm to 15mm, respectively. The chemical reactor having two inlets was designed in order to supply the reactants uniformly to the metal oxide device. The second-experiment was lasted for 5 cycles, which was for 6 hours. The total amount of the $H_2$ production was 861.30mL.