• 대한치과교정학회지
• /
• 제19권2호
• /
• pp.25-34
• /
• 1989

This experiment was performed to study the effect of prostaglandin $E_2$ on tooth movement and root resorption in orthodontically treated cats. Twenty five cats were divided into five groups and closed coil springs delivered 80gm were stretched between upper canine and 3rd premolar. $10{\mu}g$ of $PGE_2$ was injected locally in the submucosal area of the upper right canine, while the left side served as a control and was injected saline 0.1ml. The distance between canine tip and central cusp tip of the 3rd premolar was measured. Scanning electron photomicrographs were made of the coronal half of the distal root surface of canines and cemental craterings were observed and quantified using point-counting volumetry. Data were analyzed by 2-way ANOVA and paired t-test. The results were as follows: 1. The rate of tooth movement of the $PGE_2$ side was increased, particularly at 1 day, compared with the control side. 2. The rate of tooth movement was minimum from 7 days to 10 days. 3. The resorption of root surface of the $PGE_2$ side was decreased from 4 days to 10 days, compared with the control side.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제35권6호
• /
• pp.360-367
• /
• 2013

Purpose: The purpose of this study was to perform three-dimensional (3D) assessment of facial soft tissue in patients with skeletal Class III and mandibular asymmetry after orthognathic surgery. Methods: Samples consisted of 3D facial images obtained from five patients with A point-nasion-B point angle less than 2 degrees, and more than 5 mm of menton deviation. All patients had been treated at Gangneung-Wonju National University Dental Hospital from 2009 to 2012. They had undergone orthognathic surgery of Lefort I, and sagittal split osteotomy for correction of skeletal deformity, and orthodontic treatment. Facial scanning was performed before treatment (T1) and post-surgical orthodontic treatment (T2). Linear and angle variables of soft tissue landmarks, antero-posterior facial depth, and facial volume were measured. Results: No significant differences in width of the alar base, mouth width, and nasal canting were observed between T1 and T2. However, lip deviation, menton deviation, alar canting, lip canting, and menton deviation angle were significantly reduced at T2. Antero-posterior facial depth on the axial plane parallel to the left cheilion was significantly reduced on the deviated side and significantly increased on the non-deviated side at T2. Volume of the lower lateral and lower medial parts of the face was reduced on the deviated side, and volume of upper lateral and lower lateral parts on the non-deviated side was significantly increased at T2. Conclusion: After orthognathic surgery, facial asymmetry of soft tissue was improved following skeletal changes, especially the mandibular region. Although the length of the alar base and mouth width did not change, lip and soft tissue menton were displaced to the medial side after treatment. Facial depth also became symmetric after treatment. Facial volume showed a decrease on the lower part of the deviated side and that on lateral parts of the non-deviated side showed an increase after treatment.

• 한국의류학회지
• /
• 제40권1호
• /
• pp.171-187
• /
• 2016

The study performed a comparison analysis of market brand patterns for slim-fit dress shirts and analyzed the body surface development figure of men in their 40s using 3D body scan data and developed slim-fit dress shirt patterns suitable for middle-aged men. The sizes of slim-fit dress shirt patterns showed a slight difference depending on brand. The overlap map of slim-fit dress shirt patterns for brands demonstrates how difference of one-dimensional sizes reflect on two-dimensional patterns. This map provides useful information for pattern design and allows and easy recognition of pattern size differences. A try-on system evaluation through 3D-Simulation allows a grasp of the fitness of neckline and size tolerance of under the arms in front, the silhouette of side lines, and overall fitness in front that also allows analysis of the front/back balance of a shirt in side, the size tolerance proportion in front/back, and the fitness of the arm-hole line. Thus, we obtained try-on results that were equivalent to wearing actual clothing. According to the drafting size suggested in the developed final pattern, the total width was 'C/2+5.5cm', and the front was set at 1cm bigger in the size difference of the front and back. The width of the front neck and the back neck was set identically at 'C/12', while the width of the front neck was set to 'C/12+1.5cm'. For the armhole depth, we added 'C/4+2cm', and '0.5cm and 1.5cm' for the width of the front and back to anthropometry. The results of the try-on evaluation through 3D-Simulation indicated that the fitness of the final slim-fit dress shirt pattern was superior to available slim-fit dress shirt patterns on the market and evaluated as superior to the types for middle-aged men.

• Journal of the Korean Wood Science and Technology
• /
• 제13권1호
• /
• pp.3-18
• /
• 1985

한국(韓國)에서는 리기다소나무 (Pinus rigida Miller, pitch pine) 지재(枝材)의 해부학적(解剖學的)인 특성(特性)에 관한 연구(硏究)가 광학현미경적(光學顯微鏡的)인 방법(方法)을 통하여 이(李)에 의하여 1972년(年) 발표(發表)되었다. 본 연구(硏究)에서는 리기다소나무 지재(枝材)의 해부학적(解剖學的)인 특성(特性)에 관한 이(李)의 연구(硏究) 속보(續報)로써 압축이상재(壓縮異常材) (compression wood), 대응재(對應材) (opposite wood) 및 측면재(側面材) (side wood)의 횡단면(橫斷面)과 방사단면(放射斷面)상의 조직학적(組織學的) 특성(特性)을 주사전자현미경(走査電子顯微鏡)을 통하여 비교(比較) 연구(硏究)한 바 얻어진 결과(結果)를 요약(要約)하여 보면 다음과 같다. 1. 압축이상재(壓縮異常材)에 있어서 춘재(春材)로부터 추재(秋材)로의 가도관(假導管) 이행(移行)은 극점(極漸)이며 가도관(假導管)의 배열(排列) 및 크기 역시 거의 균일(均一)한 상태(狀態)를 나타내지만 대응재(對應材) 및 측면재(側面材)에 있어서는 가도관(假導管)의 이행(移行)이 급(急)하며 가도관(假導管)의 배열(排列) 및 크기도 압축이상재(壓縮異常材)의 가도관(假導管)보다 불균일(不均一)하다. 또한 대응재(對應材)의 연륜폭(年輪幅)은 압축이상재(壓縮異常材)나 측면재(側面材)의 연륜폭(年輪幅)보다 좁으며 측면재(側面材)의 횡단면(橫斷面)상 방사조직(放射組織)은 압축이상재(壓縮異常材) 및 대응재(對應材)의 방사조직(放射組織)보다 더 명확(明確)하다. 2. 압축이상재(壓縮異常材)의 가도관(假導管) 특히 춘재(春材) 가도관(假導管)이 둥근 경향(傾向)을 나타내는데 반하여 대응재(對應材) 및 측면재(側面材)의 가도관(假導管)은 다소 모난 모양을 나타낸다. 그리고 세포간극(細胞間隙) (intercellular space), 나선강(螺旋腔) (helical cavity) 및 나선형(螺旋型) (spiral check)이 압축이상재(壓縮異常材)의 춘재(春材) 및 추재(秋材)에 모두 존재하는데 반하여 대응재(對應材)에 있어서는 춘재(春材) 및 추재(秋材) 모두에 존재(存在)하지 않는다. 3. 대응재(對應材) 및 측면재(側面材)에 있어서 추재(秋材) 가도관(假導管)의 막(膜) 두께가 춘재(春材) 가도관(假導管)의 것보다는 더욱 크지만 압축이상재(壓縮異常材)의 추재(秋材) 가도관(假導管)은 그 막(膜)의 두께가 춘재(春材) 가도관(假導管)의 것과 비슷하여 대응재(對應材) 및 측면재(側面材)의 가도관(假導管)과는 달리 압축이상재(壓縮異常材)의 가도관(假導管)에는 2차막(次膜)의 $S_3$ 층(層)이 존재(存在)하지 않는다. 4. 대응재(對應材) 및 측면재(側面材)의 가도관(假導管)과는 달리 압축이상재(壓縮異常材)의 가도관(假導管)은 종종 그 선단부(先端部)가 굴곡(屈曲)되어 있으며 압축이상재(壓縮異常材)의 가도관(假導管)에 존재(存在)하는 유연막공(有緣膜孔)은 대응재(對應材) 및 측면재(側面材)의 것과는 달리 세포막(細胞膜) 내표면(內表面)의 나선상(螺旋狀) (groove)에 존재(存在)한다. 5. 대응재(對應材) 및 측면재(側面材)의 가도관(假導管)의 방사막(放射膜)에 존재(存在)하는 유연막공(有緣膜孔)은 난형(卵形)이지만 압축이상재(壓縮異常材)의 가도관(假導管)의 유연막공(有緣膜孔)은 약간 변형(變形)된 난형(卵形)을 나타낸다. 6. 측면재(側面材)의 춘재(春材)에 있어서 소형(小形) 분야막공구(分野膜孔口)는 둥근 삼각형(三角形)을 나타내며 대형(大形) 분야막공구(分野膜孔口)는 2개의 소형(小形) 분야막공구(分野膜孔口)가 합병(合倂)되어 창상(窓狀)을 나타낸다. 그러나, 대응재(對應材)의 춘재(春材)에 있어서 소형(小形) 분야막공구(分野膜孔口)는 직립(直立)의 난형(卵形)을 그리고 대형(大形) 분야막공구(分野膜孔口)는 평복(平伏)의 난형(卵形)을 나타내며 압축이상재(壓縮異常材)의 분야막공구(分野膜孔口)는 가도관측(假導管側)의 막공연(膜孔緣)으로 인하여 춘재(春材)의 것이 양편 볼록렌즈형(形)을, 추재(秋材)의 것이 슬릿 (slit)형(形)을 나타낸다.

• 대한기계학회논문집A
• /
• 제20권6호
• /
• pp.1836-1842
• /
• 1996

In this paper, static and fatigue bending strengths of CFRP(carbon fiber reinforced plastic laminates having impact damage(FOD) are evaluated. Composite laminates used for this experiment are CF/EPOXY and CF/PEEK orthotropy laminated plates, which have two-interfaces[${0^0}_4{90^0}_4}$]$_sym$. A steel ball launched by the air gun colides against CFRP laminates to generate impact damages. The damage growth during bending fatigue test is observed by the scanning acoustic microscope(SAM). When the impacted side is compressed, the residual fatigue bending strength of CF/PEEK specimen P is greater that that of CF/EPOXY SPECIMEN B. On the other hand, when the impacted side is in tension, the residual fatigue bending strength of CF/PEEK speicemen P is smaller than that of CF/EPOXY specimen B. In the case of impacted-side compression, fracture is proposed from the transverse crack generated near impact point. On the other hand, fracture is developed toward the impact point from the edge of interface-b delamination in the case of impacted-side tension.

• Bulletin of the Korean Chemical Society
• /
• 제18권9호
• /
• pp.929-933
• /
• 1997

Morphological studies in the micro-end-to-end (m-E-E) and micro-side-by-side (m-S-S) aggregations were conducted by using of scanning electron microscope (SEM) for the samples precipitated by heating of the end-products of the transition of FormⅡ (left-handed helix, three peptides per turn, 31) Form Ⅰ (right-handed helix, 3.3 peptides per turn, 103) in poly(L-proline) (PLP) in acetic acid(water)-propanol (1:9 v/v) solvent. The observed morphology for the solide state shows a rope (or super helical) type and pebbles type aggregate for the (m-E-E) and (m-S-S) aggregate respectively. The viscosities were also measured during the heat-precipitation in order to elucidate the process of formation of the rope- and pebbles-type aggregates. The result for the (m-E-E) aggregations exhibit two steps, i.e., at first, the viscosity increases with time (step 1), thereafter it decrease until attain the last value (step 2). But the (m-S-S) aggregations show only one step in the decreases in viscosity. On the bases of all experimental results it is possible to propose a reasonable mechanism for the formation of the two types of aggregates of the (m-E-E) and (m-S-S).

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 가을학술발표대회논문집
• /
• pp.21-22
• /
• 2023

In order to manufacture high-quality free-form concrete panel (FCP), it is necessary to analyze the limitations of free-form silicone mold (FSM) and conduct technology development research. Currently, the FSM used in FCP manufacture is classified into a side silicon mold(SSM) and a lower silicon mold(LSM). In this study, the limitations of each silicon mold were analyzed and solutions were proposed. In the case of side silicon mold, there is a limit to cannot supporting the side pressure of concrete. Therefore, a mold stacking method was proposed, and at the same time, a process of correcting the movement value of the rod was proposed. In the case of the lower silicon mold, there is a limit to completely implementing the design shape. Therefore, a real-time scanning method and a process of displaying FCP shape coordinates were proposed. The results of this study are expected to be used as basic data for manufacturing high-quality FCP.

• 한국진공학회지
• /
• 제15권2호
• /
• pp.139-144
• /
• 2006

Scanning tunneling microscopy (STM)를 이용하여 Si(111)$4{\times}1$-In 표면에의 수소원자 흡착의 영향을 고찰하였다. STM 이미지에서 수소원자는 $4{\times}1$-In chain의 한 쪽 줄에 있는 두개의 연속된 밝은 부분 사이에 위치한다. 이 H 원자는 두 줄의 zigzag subchain 중의 한 쪽에만 선택적으로 흡착되는 경향성을 보이며 이는 수소원자의 흡착에 표면 밑의 구조가 영향을 미침을 시사한다. 표면에 흡착된 수소원자는 흡착위치 주위의 국소적 변형 뿐 만 아니라 chain 방향으로 멀리 떨어진 곳에도 영향을 미쳐서 STM 이미지에 두 배 주기의 modulation이 나타나게 한다. 수소흡착에 의해 유도되는 두 배 주기의 modulation은 기존에 보고된 Na 원자 흡착에 의해 유도되는 상과 다름을 확인하였다.

• Applied Microscopy
• /
• 제44권2호
• /
• pp.47-52
• /
• 2014

Fine structural characteristics of eggs (nits) found on the scalp hairs of Korean children were observed with scanning electron microscopy. An egg is structurally composed of four parts: the cementum, nit body, operculum, and aerophyle. The total length of an egg is about 1.5 mm. The glue secreted from the female louse completely surrounds the 1 mm hair shaft and forms the cementum. The thickness of the cementum at the end of the nit body was found to be more than 5 times the thickness at the end toward the scalp. The nit body is shaped like a goblet with a very smooth surface. The operculum and aerophyles are located at the apiculus area. In the circular operculum, there are 10 aerophyles concentrated on the side of the hair shaft surface that are shaped like a dome. Three aerophyles in the center are surrounded by 7 aerophyles. Each aerophyle is dome shaped with a diameter of $65{\mu}m$ and a respiratory pathway with a $15{\sim}25{\mu}m$ opening at the center. On the cut surface where the operculum is separated as the egg hatches, long grooves about $1{\mu}m$ thick are uniformly formed transversely. These long grooves facilitate the separation of the operculum through body expansion at the time of hatching.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.590-595
• /
• 2004

The shape and size variations of the nanopatterns produced on a positive photoresist using a near-field scanning optical microscope(NSOM) are investigated with respect to the process variables. A cantilever type nanoprobe having a 100nm aperture at the apex of the pyramidal tip is used with the NSOM and a He-Cd laser at a wavelength of 442nm as the illumination source. Patterning characteristics are examined for different laser beam power at the entrance side of the aperture( $P_{in}$ ), scan speed of the piezo stage(V), repeated scanning over the same pattern, and operation modes of the NSOM(DC and AC modes). The pattern size remained almost the same for equal linear energy density. Pattern size decreased for lower laser beam power and greater scan speed, leading to a minimum pattern width of around 50nm at $P_{in}$ =1.2$\mu$W and V=12$\mu$m/. Direct writing of an arbitrary pattern with a line width of about 150nm was demonstrated to verify the feasibility of this technique for nanomask fabrication. Application on high-density data storage using azopolymer is discussed at the end.