• 제목/요약/키워드: Side ratio

검색결과 2,037건 처리시간 0.028초

고조파 조절기 형상이 자석 기어의 코깅 자기력에 미치는 영향 분석 (Influence of Harmonic Modulator Shape on the Cogging Force of Magnetic Gear)

  • 정광석
    • 융복합기술연구소 논문집
    • /
    • 제12권1호
    • /
    • pp.7-12
    • /
    • 2022
  • The reduction ratio of the magnetic gear is determined by the ratio of the number of poles between the high-speed permanent magnet layer and the low-speed permanent magnet layer. In general, it is known that the greater the least common multiple of both poles, the smaller the torque ripple called by cogging of the magnetic force generated in the magnetic gear. However, little is known about the effect of the harmonic modulator that filters the magnetic field in the magnetic gear to magnetically couple the high-speed side and the low-speed side except for the number of poles. In this study, torque ripple characteristics according to changes in modulator shape such as opening ratio and tooth thickness are analyzed using a finite element analysis tool.

A Study on the Optimum Mix Proportion of the Mass Concrete Designed as Massive and Deep Structure

  • Kwon Yeong-Ho;Lee Hwa-Jin
    • 콘크리트학회논문집
    • /
    • 제17권2호
    • /
    • pp.293-302
    • /
    • 2005
  • This study describes data from determination of the optimum mix proportion and site application of the mass concrete placed in bottom slab and side wall having a large depth and section as main structures of LNG in-ground tank. This concrete requires low heat hydration, excellent balance between workability and consistency because concreting work of LNG in-ground tank is usually classified by under-pumping, adaptation of longer vertical and horizontal pumping line than ordinary pumping condition. For this purpose, low heat Portland cement and lime stone powder as cementitious materials are selected and design factors including unit cement and water content, water-binder ratio, fine aggregate ratio and adiabatic temperature rising are tested in the laboratory and batch plant. As experimental results, the optimum unit cement and water content are selected under $270kg/m^3$ and $l55{\~}l60 kg/m^3$ separately to control adiabatic temperature rising below $30^{\circ}C$ and to improve properties of the fresh and hardened concrete. Also, considering test results of the confined water ratio($\beta$p) and deformable coefficient(Ep), $30\%$ of lime stone powder by cement weight is selected as the optimum replacement ratio. After mix proportions of 5cases are tested and compared the adiabatic temperature rising($Q^{\infty}$, r), tensile and compressive strength, modulus of elasticity, teases satisfied with the required performances are chosen as the optimum mix design proportions of the side wall and bottom slab concrete. $Q^{\infty}$ and r are proved smaller than those of another project. Before application in the site, properties of the fresh concrete and actual mixing time by its ampere load are checked in the batch plant. Based on the results of this study, the optimum mix proportions of the massive concrete are applied successfully to the bottom slab and side wall in LNG in-ground tank.

위성 DMB 중계기용 Cavity-Backed슬롯 배열 안테나 (Cavity-Backed Slot Array Antenna for a Repeater System of a Satellite Digital Multimedia Broadcasting)

  • 정희철;이학용;정병운;강기조;박면주;이병제
    • 한국전자파학회논문지
    • /
    • 제16권4호
    • /
    • pp.366-372
    • /
    • 2005
  • 본 논문에서는 $2,630\;\cal{MHz}\~2,655\;\cal{MHz\$의 위성 DMB(Digital Multimedia Broadcasting)의 지상 중계기 시스템에 적합한 낮은 부엽레벨과 높은 전후방 비를 갖는 슬롯배열 안테나를 제안하였다. 중계기용 안테나는 시스템의 특성상 고이득과 시스템간의 신호 간섭을 줄이기 위해 충분한 격리도가 확보되어야 하며, 이를 위해서는 안테나의 부엽레벨을 억제시키고, 전후방 비는 증대시켜야 한다. 제안된 안테나는 도파관 구조의 직접급전이 가능한 CBSA(Cavity-Backed Slot Array) 안테나이다. 일반적인 마이크로 스트립 급전라인을 이용한 구조와는 달리 유전체 손실이나 급전라인의 손실이 없는 공기를 매질로 하므로, 고출력에 적합하며, 고효율을 가진다. 또한 tapered 배열 방식과 최적화된 수직 반사판을 이용하여 부엽레벨 및 전후방 비를 개선하고 이득을 증대시켰다. 제작 및 측정을 통하여 부엽레벨은 수평 및 수직면에서 각각 $-33.24\;\cal{dB}$ 이하, $-35.78\;\cal{dB}$ 이하를 얻었고 전후방비는 $37.84\;\cal{dB}$ 이상, 이득은 전 대역에서 $17\;\cal{dBi}$ 이상을 얻었다.

개더스커트의 시각적 이미지에 의한 형상평가 (A Judgment on Gathered Skirt's Shape by Visual Image)

  • 이명희
    • 한국의류산업학회지
    • /
    • 제12권2호
    • /
    • pp.214-218
    • /
    • 2010
  • This research was to judge on the gathered skirt's shape by visual images that was from the different gathered skirts according to different sewing conditions; fabrics(cotton, mixed-wool, polyester), ratio of gathers(1.5T, 2.0T, 2.5T). Questionnaire consists of 33 semantic differential scale expressing gathered skirt's image, and 10 items of the shape were measured by 3D measurements method. The data were analyzes by factor analysis, correlation analysis, ANOVA. The image of gathered skirts was composed of the five factors of activities, attraction, grace, softness, and ordinary and it was showed that these five factors occupied 68.4% of the total variance. The shape of gathered skirts was composed of the two factors of the side and the front, and it was showed that these two factors occupied 93.6% of the total variance. According to correlation analysis of visual shape, the front was significant in activities, attraction and ordinary, and the side was significant in activities, grace and ordinary. As a result of ANOVA, the visual images were significant in ratio of gathers. 2.5 ratio of gathered skirts were perceived to be more active and attractive, and 1.5 ratio of gathered skirts were more ordinary and graceful.

종횡비에 따른 납작관-평판휜 형상의 밀집형 열교환기 내공기 측 대류열전달특성에 대한 수치해석 (Numerical Analysis for the Air-Side Convective Heat Transfer Characteristics in a Compact Heat Exchanger with Flat Tubes and Plate Fins According to the Aspect Ratio)

  • 모정하
    • 대한기계학회논문집B
    • /
    • 제32권9호
    • /
    • pp.695-703
    • /
    • 2008
  • Numerical analysis has been carried out to investigate air-side convective heat transfer characteristics in a compact heat exchanger with flat tubes and continuous plate fins according to the aspect ratio. RNG k-$\varepsilon$ model is applied for turbulence analysis. Simulation results such as air velocity and temperature distributions are presented, and heat transfer coefficients are compared with previous correlations for circular tubes. The numerical conditions are considered for the aspect ratios ranging from 3.06 to 5.44 and Reynolds number ranging from 1000 to 10,000. The results showed that heat transfer coefficients decreased with the increase of aspect ratio. From the calculated results a correlation of Colburn j factor for the considered aspect ratio in the compact heat exchanger system is suggested. The predicted results in this study can be applied to the optimal design of air conditioning system.

압력면윙렛/흡입면스퀼러형 터빈 동익 팁누설영역에서의 3차원유동 및 압력손실 (Three-Dimensional Flow and Aerodynamic Loss in the Tip-Leakage Flow Region of a Turbine Blade with Pressure-Side Winglet and Suction-Side Squealer)

  • 천주홍;강동범;이상우
    • 대한기계학회논문집B
    • /
    • 제38권5호
    • /
    • pp.399-406
    • /
    • 2014
  • 본 연구에서는 압력면윙렛/흡입면스퀼러형 터빈 동익 팁에 대하여 익렬 하류에서 3차원 유동 및 압력손실을 측정하였다. 팁간극비 h/s = 1.36%에 대하여, 흡입면스퀼러의 높이는 $h_s/s$ = 3.75%로 일정하게 유지하고, 압력면윙렛의 폭은 w/p = 2.64%, 5.28%, 7.92%, 10.55% 등으로 변화시키면서 실험을 수행하였다. 그 결과, 본 연구의 팁은 평면팁 대비 통로와류 영역에서 압력손실의 저감 효과가 매우 뛰어났지만, 팁누설와류 영역에서는 오히려 압력손실을 크게 증가시켰다. 본 연구의 질량평균 압력손실은 평면팁에 비해 크게 낮았지만, 전면스퀼러팁보다는 더 크게 나타났다. 압력면윙렛의 폭이 증가할수록 질량평균 압력손실은 감소하는 경향을 보였다.

FLOW-3D를 이용한 다양한 곡률에 대한 횡월류 위어의 유량계수 산정 (Discharge Coefficient of Side Weir for Various Curvatures Simulated by FLOW-3D)

  • 정창삼
    • 한국방재안전학회논문집
    • /
    • 제8권1호
    • /
    • pp.5-13
    • /
    • 2015
  • 본 연구는 수치모형을 이용하여 만곡수로 외측에 설치된 횡월류 위어의 곡률반경에 대한 횡월류 유량계수를 분석한 연구이다. 곡률반경의 변화에 따른 만곡부의 중심각이 $180^{\circ}$인 수로모형을 설계하였으며, FLOW-3D모형에 적용하여 유량계수를 산정하고 직선 수로와 비교하는 방법으로 유량계수의 특성을 분석하였다. 모형의 적용성 검증을 위해 기존에 연구되었던 수리실험과 동일한 조건의 수치모의를 수행하였다. 하폭(b)을 고정시키고 곡률반경($R_c$)을 변화시킴으로써 $R_c/b$의 변화에 따른 유량계수($C_M$)의 변화를 분석하고, 만곡수로의 월류량($Q_{wc}$)에 대한 직선수로의 월류량($Q_{wc}$)의 비를 분석하였다. 분석결과 유량계수는 상류수심, 만곡수로의 곡률반경의 변화에 따라 유량계수는 변화하였으며, 직선과 만곡수로에 대해 분석을 수행하였기 때문에 직선수로의 영향인자를 이용하여 만곡수로에 설치된 횡월류 위어의 월류량과 유량계수를 추정 가능 할 것이라 판단된다.

편마비 환자에서 팔사혈(八邪穴) 자침(刺鍼)이 가속도맥파에 미치는 영향 (Effects of Acupuncture at Palsa(BaXie) Evaluated by the Second Derivative of Photoplethysmogram Waveform in Hemiparetic Patients after Stroke)

  • 여경찬;윤인애;김지나;방성필;문성일
    • Journal of Acupuncture Research
    • /
    • 제27권2호
    • /
    • pp.23-30
    • /
    • 2010
  • Objectives : The second derivative of photoplethysmogram waveform(SDPTG) is a simple, convenient and non-invasive technique for pulse wave analysis. This study was designed to investigate the differences in the SDPTG between the affected side and the unaffected side in hemiparetic patients after stroke, and the effects of acupuncture at Palsa(BaXie) in hemiparetic patients after stroke. Methods : To evaluate the differences between the affected side and the unaffected side in hemiparetic patients after stroke, their SDPTG were recorded by using a Cardio Peri SA6000. To evaluate the effects of acupuncture at Palsa(BaXie) in 20 hemiparetic patients after stroke and 20 healthy subjects, their SDPTG were recorded 2 times(pre-acupuncture and post-acupuncture). The SDPTG consists of an a, b, c and d wave in systole and an e wave in diastole. Sano aging index was defined as (b-c-d)/a. Results : 1. The affected side in hemiparetic patients after stroke had higher average b/a ratio(p<0.05)and Sano aging index(p<0.05) than the unaffected side 2. In a comparison of pre-acupuncture and post-acupuncture at the Palsa(BaXie), b/a ratio(p<0.05) and Sano aging index(p<0.05) was decreased significantly in both hemiparetic patients and healthy subjects. Conclusions : These findings suggest that acupuncture at Palsa(BaXie) may be effective method of reverting some of the deleterious effects on vascular function produced by stroke.

사상체질 판별을 위한 측면 얼굴 이미지에서의 특징 검출 (Side Face Features' Biometrics for Sasang Constitution)

  • 장천;이기정;황보택근
    • 인터넷정보학회논문지
    • /
    • 제8권6호
    • /
    • pp.155-167
    • /
    • 2007
  • 사상의학에서는 사람을 네 종류로 구분하며, 한의사들은 종종 이 네 종류에 기반을 두어 특별한 건강 정보와 치료 방법을 제안한다. 얼굴의 특징 비율(표 1)은 사상체질을 판단하는데 있어서 매우 중요한 기준으로 사용되는데, 본 논문에서는 측면얼굴에서 특징 비율을 추출하기 위한 시스템을 제안하였다. 특징 비율을 얻기 위해서는 두 가지를 고려하여야 한다. 하나는 대표 특징들을 선택하는 것이고, 다른 하나는 측면 얼굴 이미지에서 효과적으로 관심 영역을 검출하고, 정확하게 특징 비율을 계산하는 것이다. 논 논문에서 제시한 시스템에서는 적응형 색상 모델을 사용하여 배경에서 측면 얼굴을 분리하였고, 관심 영역 검출을 위해서 기하 모델에 기반한 방법이 사용되었다. 또한 이미지 크기와 머리 포즈에 따른 이미지 변화에 의해서 야기되는 에러 분석을 제시하였다. 제시한 시스템의 성능을 평가하기 위하여 173명의 한국인 왼쪽 얼굴 사진을 이용하여 시스템을 테스트하였고, 정면 사진과 측면 사진을 함께 사용하였을 경우 정면 사진만을 사용한 경우보다 17.99%의 성능 향상을 나타내었다.

  • PDF

PTS 방식에서 기준 심볼을 이용한 부가정보 전송 (Side Information Transmission using Reference Symbol in PTS Scheme)

  • 유흥균;박종현;박진수
    • 한국전자파학회논문지
    • /
    • 제15권4호
    • /
    • pp.414-420
    • /
    • 2004
  • Orthogonal frequency-division multiplexing(OFDM)은 무선 환경에서 고속 데이터 전송에 적합한 방식이다. 그러나 높은 peak-to-average power ratio(PAPR)로 인하여 비선형 왜곡의 문제점이 있다. 여러 PAPR 저감 방법 중에서 partial transmit sequences(PTS)는 매우 유연하고 스펙트럼 왜곡이 발생하지 않는 좋은 방법으로 평가된다. 이 방법의 문제점은 최적화된 rotation factor에 대한 부가 정보를 수신기에 전송해야만 데이터를 정확히 복원할 수 있다는 점이다. 본 논문에서는 기존 PTS 방식에서 기준 심볼을 이용하여 부가 정보를 전송하는 기법을 새롭게 제안한다. 이 기법은 rotation factors의 정보를 기준 심볼의 위상으로 표현하는 방법이다. 시뮬레이션 결과를 통해 제안 방식이 종전의 PTS와 동일한 PAPR 저감 성능을 가지면서 정확하게 데이터를 복원하여 요구 BER이 만족됨을 확인하였다. 또한, 제안 방식은 변조 방식에 무관하며, 간단하게 시스템을 구현할 수 있다.