References
- Lee, S. W., Kim, S. U. and Kim, K. H., 2012, "Aerodynamic Performance of Winglets Covering the Tip Gap Inlet in a Turbine Cascade," International Journal of Heat and Fluid Flow, Vol. 34, pp. 36-46. https://doi.org/10.1016/j.ijheatfluidflow.2011.11.008
- Bindon, J. P., 1989, "The Measurement and Formation of Tip Clearance Loss," ASME Journal of Turbomachinery, Vol. 111, pp. 257-263. https://doi.org/10.1115/1.3262264
- Yamamoto, A., 1989, "Endwall Flow/Loss Mechanism in a Linear Turbine Cascade with Blade Tip Clearance," ASME Journal of Turbomachinery, Vol. 111, pp. 264-274. https://doi.org/10.1115/1.3262265
- Lee, S. W., Moon, H. S. and Lee, S. E., 2009, "Tip Gap Height Effects on Flow Structure and Heat/Mass Transfer over Plane Tip of a High-Turning Turbine Rotot Blade," International Journal of Heat and Fluid Flow, Vol. 30, pp. 198-210. https://doi.org/10.1016/j.ijheatfluidflow.2008.12.009
- Lee, S. W. and Chae, B. J., 2008, "Effects of Squealer Rim Height on Aerodynamic Losses Downstream of a High-Turning Turbine Rotor Blade," Experimental Thermal and Fluid Science, Vol. 32, pp. 1440-1447. https://doi.org/10.1016/j.expthermflusci.2008.03.004
- Lee, S. W. and Choi, M. Y., 2010, "Tip Gap Height Effects on the Aerodynamic Performance of a Cavity Squealer Tip in a Turbine Cascade in Comparison with Plane Tip Results: Part 2-Aerodynamic Loss," Experiments in Fluids, Vol. 49, pp. 713-723. https://doi.org/10.1007/s00348-010-0849-5
- Lee, S. E., Lee S. W. and Kwak, H. S., 2011, "Tip Leakage Aerodynamics over Stepped Squealer Tips in a Turbine Cascade," Experimental Thermal and Fluid Science, Vol. 35, pp. 135-145. https://doi.org/10.1016/j.expthermflusci.2010.08.014
- Li, W., Jiang, H., Zhang, Q, and Lee, S. W., 2013, "Squealer Tip Leakage Flow Characteristics in Transonic Condition," ASME Journal of Engineering for Gas Turbine and Power (in Press), ASME Paper GT2013-95283.
- O'Dowd, D. O., Zhang, Q., He, L., Oldfield, M. L. G., Ligrani, P. M., Cheong, B. C. Y. and Tibbott, I., 2011, "Aerothermal Performance of a Winglet at Engine Representative Mach and Reynolds Numbers," ASME Journal of Turbomachinery, Vol. 133, pp. 041026-1-041026-8. https://doi.org/10.1115/1.4003055
- Papa, M., Goldstein, R. J. and Gori, F., 2003, "Effects of Geometry and Tip Clearance on the Mass/Heat Transfer from a Large-Scale Gas Turbine Blade," ASME Journal of Turbomachinery, Vol. 125, pp. 90-96. https://doi.org/10.1115/1.1529190
- Treaster, A. L. and Yocum, A. M., 1979, "The Calibration and Application of Five-Hole probes," ISA Transactions, Vol. 18, pp. 23-34.
- Abernethy, R. B., Benedict, R. P. and Dowdell, R. B., 1985, "ASME Measurement Uncertainty," ASME Journal of Fluids Engineering, Vol. 107, pp. 161-164. https://doi.org/10.1115/1.3242450