• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.10
• /
• pp.645-651
• /
• 2016

Effects of pressure-side winglet width on the tip leakage flow and aerodynamic loss downstream of a turbine blade with a pressure-side squealer rim have been investigated for the tip gap-to-span ratio of h/s = 1.36%. The pressure-side squealer has a fixed height-to-span ratio of $h_p/s=3.75%$ and the pressure-side winglet, which is installed at an elevation of tip surface, has width-to-pitch ratios of w/p = 2.64%, 5.28%, 7.92% and 10.55%. The results show that with increasing w/p, aerodynamic loss in the passage vortex region decreases, whereas that in the leakage flow region increases. As a result, the mass-averaged loss coefficient all over the measurement plane tends to decrease minutely with the increment of w/p. It is concluded that the pressure-side winglet for the pressure-side squealer tip can hardly contribute to the tip-leakge loss reduction.

• Steel and Composite Structures
• /
• v.48 no.3
• /
• pp.263-273
• /
• 2023

This paper investigates dynamic characteristics of a graphene nanoplatelets reinforced composite (GNPRC) sandwich doubly curved shell based on the first-order shear deformation theory (FSDT) and Hamilton's principle. The sandwich doubly curved shell is fabricated from a core made of honeycomb materials sandwiched by composite GNPs reinforced face-sheets. Effective materials properties of composite face-sheets are assumed to vary based on Halpin-Tsai micromechanical models and rule of mixture. Furthermore, the material properties of honeycomb core are estimated using Gibson's formula. The fundamental frequencies of the shell are computed with changes of main geometrical and material properties such as amount and distribution type of graphene nanoplatelets, side length ratio, thickness to length ratio of and side length ratio of honeycomb. The Navier's technique is presented to obtain responses. Accuracy and trueness of the present model and analytical solution is confirmed through comparison of the results with available results in literature. It is concluded that an increase in thickness to length ratio yields a softer core with lower natural frequencies. Furthermore, increase in height to length ratio leads to significant decrease in natural frequencies.

• Journal of Yeungnam Medical Science
• /
• v.14 no.1
• /
• pp.101-110
• /
• 1997

The maximal voluntary strength of knee extension and flexion on both the right and left sides was measured in patients with hemiparesis of upper motor neuron type and in a group of normal subjects. Significant differences of maximal voluntary strength were found between male and female but the ratio of flexor to extensor strength did not vary significantly between the sides, between the sex in normal subjects. The maximal voluntary strength of uninvolved side were not reduced significantly but involved side reduced significantly in patients. The ratio of flexor to extensor strength in hemiparetic side was significantly less than the ratio for the normal subjects but not significant difference in uninvolved side of patients. According to the above results, the maximal voluntary strength of flexion was more reduced than that of the extension in lower extremity of hemiparesis patients. The strength ratio of flexion to extension was a useful parameter for guiding the rehabilitation of hemiparesis.

• Journal of Yeungnam Medical Science
• /
• v.20 no.2
• /
• pp.117-128
• /
• 2003

Thallium-201 scintigraphy is used to discriminate the malignant bone tumor from the benign by qualitatively and quantitatively, and to predict the response of preoperative chemotherapy in osteosarcoma, by comparing the changes of thallium uptake ratio after chemotherapy to the tumor necrosis ratio. Thallium-201 scintigraphy scan should be done prior to surgical biopsy. PICKER Prism 2000 gamma camera with high resolution parallel hole collimator is usually used for scanning. The patient is injected with 2-3mCi of Tl-201 and the early phase is checked in 30 minutes and delayed phase in 3 hours. The scan images are visually evaluated by a blinded nuclear medicine physician. We could evaluate true positive, true negative, false positive and false negative by the comparison of results with those of biopsy, and calculate positive and negative predictive value(%), sensitivity(%), specificity(%) and diagnostic accuracy(%). For the quantitative analysis of thallium uptake, we drew the region of interest on the tumor side and contralateral normal side as mirror image, and calculated the uptake ratio with dividing the amount of gamma count in tumor side by normal side. We could calculate the percent changes of thallium uptake ratio in early and delayed phase, and compare them to the ratio of tumor necrosis. Thallium-201 scintigraphy proved as useful imaging study to discriminate malignant bone tumor from benign, but had exception in giant cell tumor and low grade malignant bone tumors. We can use T1-201 scan to differentiate the benign from the malignant tumor, and to evaluate the response of preoperative chemotherapy or radiotherapy, and to determine the residual tumor or local recurrence. For the better result, we need to have a more detail information about false positive cases and a more objective and quantitative reading technique.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.47 no.5
• /
• pp.588-596
• /
• 2014

To examine the influences of water temperature and stocking density on feeding, growth and blind-side hypermelanosis of the starry flounder Platichthys stellatus, we performed an experiment with fry at two densities: 2 and 8 fish/L. The fry had a total length of $3.2{\pm}0.1cm$, body weight $0.6{\pm}0.1g$, and pigmented patches (pigmented ratio $2.6{\pm}0.4%$) on the blind side. Duplicate experiments were conducted in 93.7 L glass tanks for 120 days, from July to November. We determined daily food intake (DFI), food efficiency (FE), growth, survival rate, ratio of hypermelanic fish, and pigmented area rate on the blind side at 60-day intervals. The DFI was less than 50 mg/fish/day, and growth was delayed from July to September (water temperature [WT]> $20^{\circ}C$). After October, when WT < $20^{\circ}C$, the DFI increased significantly and the growth was accelerated, suggesting that the rearing temperature of starry flounder in artificial facilities should be < $20^{\circ}C$. While the FE, and survival did no differ between the two density groups, DFI and growth were significantly higher at 2 fish/L than at 8 fish/L. There was no difference in the pigmented area ratio between the two density groups. Although the hypermelanosis was not correlated with body size, the malpigmentation increased with growth. These results suggest that a high stocking density is not the main cause of blind-side hypermelanosis, although it can accelerate hypermelanosis in the starry flounder.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.05
• /
• pp.334-337
• /
• 1997

Von Mises stress and compliance distribution was evaluated using a finite element analysis on the end-to-side anastomosis of an artery with length of $20\sim24mm$, inner diameter of 4mm, thickness of 0.5mm and a PTFE graft with length of 10mm, inner diameter of 2mm, thickness of 0.2mm when the anastomotic angle was taken from $30^{\circ}\sim90^{\circ}$ in every $10^{\circ}$ and the diameter ratio from $0.1\sim1$ in every 0.1. The inner pressure of $1330dyne/mm^2$ was applied inside the 2 conduits. It was found that the compliance whose magnitude is larger on the acute angle anastomotic side than on the acute angle side became larger as the anastomotic angle became smaller and the diameter ratio larger and that the equivalent stress on the acute angle anastomotic side was larger than that on the abtuse angle side and became larger as the anastomotic angle and the diameter ratio became larger.

• Journal of Biomedical Engineering Research
• /
• v.19 no.2
• /
• pp.183-188
• /
• 1998

Von Mises stress and compliance distribution was evaluated using a finite element analysis on the end-to-side anastomosis of an artery with length of 20-24mm, inner diameter of 4mm, thickness of 0.5mm and a PTFE graft with length of 10mm, inner diameter of 2mm, thickness of 0.2mm when the anastomotic angle was taken from 30$^{\circ}$~90$^{\circ}$ in every 10$^{\circ}$ and the diameter ratio from 0.1-1 in every 0.1. The inner pressure of 1330 dyne/$\textrm{mm}^2$ was applied inside the 2 conduits. It was found that the compliance whose magnitude is larger on the acute angle anastomotic side than on the abtuse angle side became larger as the anastomotic angle became smaller and the diameter ratio larger and that the equivalent stress on the acute angle anastomotic side was larger than that on the abtuse angle side and became larger as the anastomotic angle and the diameter ratio became larger.

• PNF and Movement
• /
• v.19 no.3
• /
• pp.413-422
• /
• 2021

Purpose: This study was conducted to investigate changes in the cervical and lumbar flexion-relaxation ratio, range of motion, pressure pain threshold, and perceived comfort following the wearing of a trunk brace during smartphone watching. Methods: To calculate the number of subjects for this study, an analysis with G^*Power was performed at a statistical power of 0.8, an effect size of 0.5, and a significance level of 0.05, based on the results of a preliminary experiment on five subjects. In total, 27 adult men and women were recruited who had been informed of the study's purpose and process and had agreed to participate. All subjects watched content on a smartphone for 20 minutes in the same posture and conditions while wearing and not wearing a trunk brace, and then their cervical and lumbar flexion-relaxation ratio, range of motion, pressure pain threshold, and perceived comfort were measured. Results: Compared to the non-wearing of a trunk brace, the wearing of a trunk brace resulted in a statistically significant smaller decline in cervical extension and right-side cervical rotation (p<0.05). When the subjects wore a trunk brace, their right- and left-side cervical and right-side lumbar pressure pain statistically significantly improved when compared to not wearing a trunk brace (p<0.05). They also perceived a significantly lowered level of comfort 20 minutes after wearing a trunk brace compared to immediately after wearing it (p<0.05). Conclusion: The trunk brace was effective in reducing declines in right-side cervical rotation and the occurrence of left- and right-side cervical and right-side lumbar pressure pain. The findings indicate the need to improve the perceived comfort of trunk braces.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.33 no.6
• /
• pp.357-366
• /
• 2021

In this study, hydraulic model tests were performed to investigate the stability of armor units at harbor side slope for rubble mound structures. The Korean design standard for harbor and fishery port suggested the design figures that showed the ratio of the armor weight for each location of rubble mound structures and it could be known that the same weight ratio was needed to the sea side and harbor side (within 0.5H from the minimum design water level) slope of rubble mound structures. The super structures were commonly applied to the design process of rubble mound structures in Korea and the investigation of the effects of super structures would be needed. The stability number (N_od = 0.5) was applied (van der Meer, 1999) and it showed that the armor (tetrapod) weight ratio for harbor side slope of rubble mound structures needed 0.8 times of that for sea side slope.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.35 no.5
• /
• pp.102-108
• /
• 2023

In this study, hydraulic model tests were performed to investigate the stability of armor units at harbor side slope for rubble mound structures. The armor units on the rear slope were rocks. The Korean design standard for harbor and fishery port suggested the design figures that showed the ratio of the armor weight for each location of rubble mound structures and it could be known that the same weight ratio was needed to the sea side and rear side slope of rubble mound structures. The crest elements were commonly applied to the design process of rubble mound structures in Korea and the investigation of the effects of super structures would be needed. The damage rate (S =2) was applied and the stable wave height was measured for each test condition. The results were suggested as the armor weight ratio of the rear side slope(armor rock) to the sea side slope (tetrapod) in relation to the relative crest height.