• 건축역사연구
• /
• 제29권1호
• /
• pp.39-49
• /
• 2020

A dapo type bracket system which consists of chuganpo(柱間包) and chusangpo(柱上包) with a fake-beam adopted a nemok-dori member to cope with oemok-dori member in order to obtain balance between the outer-side and the inner-side of the bracket system. The middle part of the longest rater in the dapo system is supported by three points made by oemok-dori, jusim-dori and nemok-dori members and the area between the rafer supporting points forms a supporting area. The increase of rafter supporting points and supporting area leads to heightening the structural stability and the efficiency of load delivery. In the eave of dapo system the portion where the three supporting points formed by oemok-dori, jusim-dori and nemok-dori members shows as 33% in the early period, 71% in the middle period and 78% in the later period. On the contrary the portion where more than one of the three dori members were omitted shows as 67% in the early period, 29% in the middle period and 22% in the later period. This is the result of the increase of the number and the distance of steps in the dapo bracket system as time goes on. This is because the structural role of three supporting points becomes important as the increase of distance between the dori members leads to the increase of load which burdens on each dori member.

• 대한설비공학회지:설비저널
• /
• 제10권4호
• /
• pp.297-303
• /
• 1981

Optimal design of shell and tube heat exchanger system with the working fluids which may condense outside the tubes has been carried out under specified inlet and outlet conditions. Independent variables such as number of parallel series, tube diameter, distribution pitch, tube side pressure loss, baffle cut and shell side pressure loss as well as dependent variables such as shell diameter, number of tubes, number of serial series and number of baffles were all characterized according to the standard. Exhaustive search method was used to construct a computer program together with the calculation of heat transfer rate by LMTD method. stress analysis of maj or parts was made to examine their dimensions satisfying heat transfer and pressure loss requirements. Cost estimation based on the installation, operation and maintenance was also made, A few representative variables, heat transfer area, shell diameter and pressure loss, were used to express cost function, finally giving the optimal selection of all tentative solutions.

• 한국정밀공학회지
• /
• 제17권3호
• /
• pp.192-199
• /
• 2000

The spot-welded automotive side member which has a hat-shaped section and a double hat shaped section has been tested on the axial static(10mm/min) and quasi-static(50mm/min) compressing load. The collapse characteristics of automotive sections have been reviews on shift on shape and in width of the spot-voiding on the flange. On the basis of the results of tests and reviews, the optimum energy absorption capacity of the structure has been studied.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2009년도 특별논문집
• /
• pp.65-70
• /
• 2009

In case that tug boat pushes side structures of other large vessels to maneuver, it is required that contacted side structures of the maneuvered vessels have enough structural safety against tug push loads. The objective of this study is to evaluate the structural effect of carling which is installed between side longitudinal stiffeners. A comparative study of side structures with carling and without carling is performed to evaluate the effect of carling member by both FE analysis. According to the result, it is found that the carlings play effective role in the strength of side plates and side longitudinal stiffeners against tug push loads.

• 디지털융복합연구
• /
• 제14권12호
• /
• pp.503-513
• /
• 2016

본 연구는 노인요양병원에 입원한 환자가족들이 환자의 침대난간 사용을 어떻게 인지하고 있는지를 기술하고 탐색하기 위해 시도되었다. 수집된 자료는 심층면담을 이용하였고, Cavanagh의 내용분석(content analysis)방법으로 분석하였다. 연구결과 노인요양병원에서 침대난간 사용에 대한 환자가족의 인식은 예방적 안전, 이동의 편리함, 의례적인 간호, 감옥같은 생활, 부상위험, 침대난간의 대체 가능한 대안의 6가지 주제로 도출되었다. 관습화된 침대난간 사용의 긍정적 효과가 침대난간 사용에 대한 환자 가족들의 부정적 견해보다 중요하게 생각되고 있다는 점을 연구를 통해 알 수 있었고, 병원관계자들이 환자개인의 자유, 신체적 속박, 속박에 대한 부작용, 대안에 대한 이슈에 대해 환자와 환자가족들과 의사결정을 함께 할 것을 제안하고자 한다. 병원의 의료환경 변화로 인해, 의료행위의 효과성과 효율성, 위험관리, 그리고 근거기반실무가 강조되고 있다. 그러나 침대난간 사용이나 신체적 속박 문제는 해답을 쉽게 찾을 수 없는 주제이며 간호사들은 침대난간 사용에 있어 엄격한 사용지침에 따라 명확하게 간호행위를 수행해야 할 것이다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 춘계학술대회 논문집
• /
• pp.106-109
• /
• 2005

Springback is a common phenomenon in sheet metal forming, caused by the elastic recovery of the internal stresses after removal of the tooling. Recently, advanced high strength steels (AHSS) such as TRIP and DP are finding acceptance in the automotive industry because their superior strength to weight ratio can lead to improved fuel efficiency and assessed crashworthiness of vehicles. The major troubles of the automotive structural members stamped with high strength steel sheets are the tendency of the large amount of springback due to the high yield strength and the tensile strength. The amount of springback is mainly influenced by the type of the yield function and anisotropic model induced by rolling. The discrepancy of the deep drawn product comparing the data of from the product design induced by springback must be compensated at the tool design stage in order to guarantee its function and assembly with other parts. The methodology of compensation of the low shape accuracy induced by large amount of springback is developed by the expert engineer in the industry. Recently, the numerical analysis is introduced in order to predict the amount of springback and to improve the shape accuracy prior to tryout stage of press working. In this paper, the tendency of springback is evaluated with respect to the blank material. The stamping process is analyzed fur the front side member formed with AHSS sheets such as TRIP60 and DP60. The analysis procedure fully covers the binderwrap, stamping, trimming and springback process with the commercial elasto-plastic finite element code LS-DYNA3D.

• 토지주택연구
• /
• 제12권4호
• /
• pp.119-125
• /
• 2021

본 연구에서는 그리드를 이용한 철근콘크리트 휨부재의 연성보강 효과를 실험결과로 제시했다. 실험변수로는 비보강 철근콘크리트 휨부재(ORI), 바닥면 보강 철근콘크리트 휨부재(REB), 바닥 및 측면 보강 철근콘크리트 휨부재(REBS)가 있다. 실험은 4절점 휨 실험으로 수행되었다. 실험 결과, 보강을 통해 최대 휨강도가 17~20% 증가하였고, 측면 보강을 통해 휨 파괴 유도를 통한 연성보강 효과를 확인하였다. 또한, 연성지수를 계산하여 REB와 REBS의 연성지수가 ORI 대비 각각 2배, 3배 증가하였음을 확인하였다.

• 대한안전경영과학회지
• /
• 제18권2호
• /
• pp.57-64
• /
• 2016

While many of company try to increase customer satisfaction by empowerment, there are need to figure out which can increase employee's problem solving ability in company side. It is related to Innovative Activity that can create new idea to fix job process. In this study, researcher institute a factor that 'Manager's Job Competency' which can increase member's Innovative Activity. And try to figuring out it has what kind of effect on innovative activity and management performance through empirical method. For the empirical study, researcher get 119 samples from service industry, and result of study show us manager's job competency has positive effect on member's innovative activity and management performance. Base on this result, researcher provide a manageric implication and limitaions of study.

• 한국자동차공학회논문집
• /
• 제8권6호
• /
• pp.142-155
• /
• 2000

A MIMO model reference control scheme incorporating the variable structure theory for a vehicle four wheel steering system(4WS) is proposed and evaluated for a class of continuous-time nonlinear dynamics with known or unknown uncertainties. The scheme employs an neural network to identify the plant systems, where the neural network estimates the nonlinear dynamics of the plant. By the Lyapunov direct method, the algorithm is proven to be globally stable, with tracking errors converging to the neighborhood of zero. The merits of this scheme is that the global system stability is guaranteed and it is not necessary to know the exact structure of the system. With the resulting identification model which contains the neural networks, it does not need higher degrees of freedom vehicle model than 3 degree of freedom model. Th proposed scheme is applied to the active four wheel system and shows the validity is used to investigate vehicle handing performances. In simulation of the J-turn maneuver, the reduction of yaw rate overshoot of a typical mid-size car improved by 30% compared to a two wheel steering system(2WS) case, resulting that the proposed scheme gives faster yaw rate response and smaller side angle than the 2WS case.

• 한국자동차공학회논문집
• /
• 제16권2호
• /
• pp.106-113
• /
• 2008

The goal of crashworthiness is an optimized vehicle structure that can absorb the crash energy by controlled vehicle deformations while maintaining adequate space so that the residual crash energy can be managed by the restraint systems to minimize crash loads transfer to the vehicle occupants. Front side assembly is one of the most important energy absorbing components in relating to the crashworthiness design of vehicle. The structure and shape of the front side assemblies are different depending on auto-makers and size of vehicles. Thus, it is not easy to grab an insight on designer's intention when you glance at a new front side member without experiences. In this paper, we have performed the explicit nonlinear dynamic finite element analysis on the front side assembly of a passenger car to investigate the effect of thickness distribution of the front side assembly on the collapse shape, which is important in the aspect of controlling deformation to maintain adequate space, from the viewpoint of reverse engineering. To do this, we have performed crash FE analysis for the assembly by varying the thickness distribution of the assembly.