• Korean Journal of Heritage: History & Science
• /
• v.47 no.4
• /
• pp.106-119
• /
• 2014

The $76^{th}$ National Treasure is consisted of seven volumes of Nanjung Ilgi (War Diary of Admiral Yi Sun-sin; each titled by the author based on the zodiac name of the year covered, i.e. Imjin Ilgi, Gyesa Ilgi, Gabo Ilgi, Byeongsin Ilgi, Jeongyu Ilgi, Sok Jeongyu Ilgi, Musul Ilgi), Seogancheob (Letters of Admiral Yi) and Imjin Jangcho (Drafts of Imjin War Reports of Admiral Yi). These are currently in the custody of Hyeonchungsa shrine, the state-managed memorial shrine of Admiral Yi, and has been added to UNESCO's Memory of the World Register in June 2013 in the appreciation of its historical and academic importance as a commander's hand-written battlefield accounts during Japanese invasions of Korea. Imjin Jangcho, among these nine volumes, is a record of battles, including observations on the enemy fleets, suggestions on naval matters, battle expenditure, and methods of battle preparation, transcribed by someone else according to Admiral Yi's instructions. It is Admiral Yi's honest detailobservations on the war situation during Japanese invasions of Korea from 1592 as a Naval Commander of Left Jeolla Province, till 1594 (Year 27 of King Seonjo's reign) as a Commander-in-Chief of the Naval Forces of the South. It is a draft of the war report to be submitted to the King in a single volume as a folio (each sheet folded once to produce one leaf) bound in a side-stitched binding with five holes and inner binding of twisted paper. This study explores the condition and the treatment performed on Imjin Jangcho which could have an implication for the conservation of cultural assets on paper of late Joseon Dynasty.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.1
• /
• pp.93-113
• /
• 2019

The behavior of the 3 hinged precast arch structure was investigated by comparing field measurements with numerical analyses performed for precast lining arch structures, which are widely used for the open-cut tunnel. According to the field measurements, the maximum vertical displacement occurred at the crown with upward displacements during the backfilling up to the crown of the arch and downward displacements at the backfill height above the crown. The final crown displacement was 19 mm upward from the original position. The horizontal displacement at the sidewall, which had a maximum horizontal displacement, occurred inward of the arch when compacting the backfill up to the crown and returned to the original position after completing the backfill construction. According to the analysis of displacement measurements, economical design is expected to be possible for precast arch structures compared to rigid concrete structures due to ground-structure interactions. Duncan model gave good results for the estimation of displacements and deformed shape of the tunnel according to the numerical analyses comparing with field measurements. The earth pressure coefficients calculated from the numerical analyses were 0.4 and 0.7 for the left and the right side of the tunnel respectively, which are agreed well with the eccentric load acting on the tunnel due to topographical condition and actual field measurements.

• Fire Science and Engineering
• /
• v.33 no.1
• /
• pp.30-38
• /
• 2019

Mixing characteristics and backdraft dynamics were investigated using large eddy simulation for compartments initially filled with methane fuel. Four different opening geometries, i.e. conventional door opening case (Door) and the cases where horizontal door was implemented on the upper ($Slot_U$), middle ($Slot_M$) and lower part ($Slot_L$) of side wall, were considered in the simulations. For cases without ignition, the amounts of inflow oxygen and outflow fuel from the compartment opening were, from largest to smallest, Door > $Slot_U$ ~ $Slot_M$ > $Slot_L$. However, the fuel and oxygen were the best mixed for the $Slot_U$ case while the fuel and oxygen were not well mixed and in relatively separated two layers for the $Slot_L$ case. The global equivalence ratio defined by the amounts of fuel and oxygen in the compartment was not correlated reasonably with the peak pressure of backdraft. The peak pressure during backdraft was the highest for the $Slot_U$ case, a well mixed condition of fuel and air, and backdraft was not found for the $Slot_L$ where the pressure rise was not so high due to the mixing status. The peak pressures for the Door and $Slot_M$ cases were in between Door and $Slot_L$ cases. The peak pressure during backdraft was well correlated with the total amount of heat release until the instance of backdraft occurrence.

• The Journal of Internal Korean Medicine
• /
• v.40 no.5
• /
• pp.851-864
• /
• 2019

Multiple system atrophy is a neurodegenerative disease that causes diverse bodily dysfunctions (cerebellar, pyramidal, automatic, and urological, in any combination), as well as Parkinsonism. Patients with multiple system atrophy commonly display antecollis, a condition where the patient's head tilts forward more than 45 degrees. Despite its common occurrence in these patients, no current standardized therapies are effective for treating antecollis. In this study, Korean medicinal treatments, including Chuna manual therapy, pharmaco-acupuncture, bee venom acupuncture, acupuncture, herbal medicine, and moxibustion therapy, were administered to the patient over a 27-day period. After the treatment, assessments of the head position on the EPIS-PD scale (Part I) and at a standing position from the side (Part II) both revealed improvements. As the head flexion angle decreased, the patient's head posture improved, as determined by a decrease in angle from 80 degrees to 30 degrees in the upright, standing position. As a result, patients who previously were unable to walk without the support of walking frames could now roam freely and independently, with significant increases in both walking speed and distance. In essence, this study suggests that Korean medicine is an effective treatment for patients with multiple system atrophy who suffer from antecollis and gait disorders.

• Clean Technology
• /
• v.27 no.1
• /
• pp.93-103
• /
• 2021

As the seriousness and necessity of responding to climate change and reducing carbon emissions increases, countries around the world are continuing their efforts to reduce greenhouse gases. Among various efforts, research on CCUS, capturing and utilizing carbon dioxide generated when using carbon-based fuels, is actively being conducted. Studies on pressurized oxy-fuel combustion (POFC) that can be used with CCUS are also being conducted by many researchers. The purpose of this study is to analyze basic information related to the flame structure and pollutant emissions of pressurized oxy-fuel combustion. For this, a counter-flow diffusion flame model was used to analyze the combustion characteristics according to pressure and oxygen concentration. As the pressure increased, the flame temperature increased and the flame thickness decreased due to a reaction rate improvement caused by the activation of the chemical reaction. As oxygen concentration increased, both the flame temperature and the flame thickness increased due to an improvement to the reaction rate and diffusion because of a change in oxidizer momentum. Analyzing the related heat release reaction by dividing it into three sections as the oxygen concentration increased showed that the chemical reaction from the oxidizer side was subdivided into two regions according to the mixture fraction. In addition, the emission index of NO classified according to the NO formation mechanism was analyzed. The formation trend of NO according to each analysis condition was presented.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.13 no.1
• /
• pp.889-901
• /
• 2021

The tension of cables and motion response significantly affect safety of an immersed tunnel element in the immersion process. To investigate those, a hydrodynamic scale-model test was carried out and the model experiments was conducted under wind, current and wave loads simultaneously. The immersion standby (the process that the position of the immersed tunnel element should be located before the immersion process) and immersion process conditions have been conducted and illustrated. At the immersion standby conditions, the maximum force of the cables and motion is much larger at the side of incoming wind, wave and current, the maximum force of Element-6 (6 cables directly tie on the element) is larger than for Pontoon-8 (8 cables tie on pontoon of the element), and the flexible connection can reduce the maximum force of the mooring cables and motion of element (i.e. sway is expecting to decrease approximate 40%). The maximum force of the mooring cables increases with the increase of current speed, wave height, and water depth. The motion of immersed tunnel element increases with increase of wave height and water depth, and the current speed had little effect on it. At the immersion process condition, the maximum force of the cables decrease with the increase of immersion depth, and dramatically increase with the increase of wave height (i.e. the tension of cable F4 of pontoons at wave height of 1.5 m (83.3t) is approximately four times that at wave height of 0.8 m). The current speed has no much effect on the maximum force of the cables. The weight has little effect on the maximum force of the mooring cables, and the maximum force of hoisting cables increase with the increase of weight. The maximum value of six-freedom motion amplitude of the immersed tunnel element decreases with the increase of immersion depth, increase with the increase of current speed and wave height (i.e. the roll motion at wave height of 1.5 m is two times that at wave height of 0.8 m). The weight has little effect on the maximum motion amplitude of the immersed tunnel element. The results are significant for the immersion safety of element in engineering practical construction process.

• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.3
• /
• pp.276-282
• /
• 2022

Close communication between clinicians and dental technicians is an important factor in providing successful prostheses. The exchange of opinions with laboratories has mainly been in the form of written prescriptions and a photos, but it has been reported that information transmission may be limited. Currently, as digital technology-based prosthesis fabrication is common, 3D image objects can be stored on the web and can be easily viewed through a mobile web browser. In this article, we introduce cases where the design of the prosthesis was improved by designing the prosthesis using CAD software and reviewing the prosthesis designed with the clinical side through a web viewer. Through this protocol, it was possible to improve the occlusal surface and crown contour, the opposing teeth condition, the size of the gingival embrasure, and the shape of pontic. The process of sharing, discussing, and modifying the prosthesis design with the clinician and technician through a web viewer contributes to reflecting the diversity of oral conditions and individualized needs, thereby helping to make functional and esthetic prostheses.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.35 no.2
• /
• pp.95-104
• /
• 2022

Objectives : This study is to report a case of otitis media with effusion accompanied by atopic dermatitis improved by Korean medicine monotherapy. Methods : A 31-year-old woman patient visited our clinic for aural fullness, hearing loss, and tinnitus of the left ear on August 14th, 2021. She also had abdominal pain, diarrhea, and general weakness because of side effects of antibiotics. Besides, she had nasal congestion, rhinorrhea, and dry skin. Through otoscopy, her tympanum was fully filled with yellow effusion. She only took Korean medicine therapy including acupuncture and herbal medicine weekly. The treatment continued for about 4 months(total 14 visits) until December 4th, 2021. Otoscopy, numerical rating scale(NRS), scoring atopic dermatitis(SCORAD) index were used to assess the symptoms. Results : On August 30, 2021, her intestinal symptoms improved. The left tympanum was recovered to normal condition as the treatment continued. The effusion disappeared on October 16th, 2021. On November 6th, 2021, peritympanic blood congestion also almost alleviated. Subjective symptoms including aural fullness, hearing loss, and tinnitus disappeared on October 16, 2021. Nasal symptoms and dry skin also improved. The SCORAD index dropped from 15 to 4. Conclusions : These results suggests that otitis media with effusion can be sufficiently managed by Korean medicine therapy. Further, active application of Korean medicine therapy to common otolaryngological diseases is necessary.

• Journal of Conservation Science
• /
• v.37 no.3
• /
• pp.209-219
• /
• 2021

In this study, the wind environment in an urban area near Sungneymun gate was numerically investigated in the cases of inflow directions. The wind fields for the target area were simulated using Geographic Information System data and Computational Fluid Dynamics model. Results, including vector fields, three-dimensional wind velocity components, and wind speeds, were analyzed to examine flow characteristics. Wind direction variability affected by buildings was shown in the target area. The complex flows around Sungneymun did not depend on the inflow direction as a boundary condition. The wind speed around Sungneymun was generally 3 times stronger at 14 m above ground level (AGL) compared to the surface wind at 2 m AGL and relatively high in the case of easterly inflow. The effect of wind was also analyzed to be relatively significant at the southeast side of Sungneymun. Thus, it was suggested that the assessment of wind environment affected by high-rise and high-density buildings should be necessary for the architectural heritage in urban areas.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.3D
• /
• pp.355-362
• /
• 2008

Fast track completion of urgent typhoon damage recovery construction project is becoming crucial for the prevention of the secondary damage from the next year typhoon, prompt psychological stabilization of flood sufferers, the early recovery of damaged infrastructure condition and so forth. As the recovery learning process has been continued for last consecutive typhoons and experts suggested, the keys in attaining the goals of the project (preventative, sustainable, cleaner and fast tracking development) are found to be the early contracting and improved competencies in project management especially during the design phase. It can be presumed that the former is attainable through administrative supports in the form of government guidelines, but the latter necessitates more research efforts. In this regards, this study aims to find a way how to lift up the current level of project management capability facing ever changing project mangement environment of urgent typhoon recovery project. By comparing the current level of application of government guidelines in flooded districts and analyzing the time required for each phase from design contracting to construction starting, several reformative ideas are illustrated in association with the necessity of adopting CM method in the deign phase. It is highly expected that CM application in the design phase can be an effective alternative in overcoming current limits in improving the quality of the project and prevent the delay due to the lack of expertise and professional workers in the owner side.