• The Korean Journal of Ecology
• /
• 제9권1호
• /
• pp.91-101
• /
• 1986

To investigate the distribution of Plantago asiatica Linne, almost, restricted on the road-side, the plant growth analyzed by experimental cultivation under the condition of tread-pressure; 10 times/day (7.33kg/$cm^2$ ), 20 times/day (12.27kg/$cm^2$), 30 times/day (20.05kg/$cm^2$ ) and the control plot (1.68kg/$cm^2$ ). The matter production in the 10-time-per-diem plot (7.33kg/$cm^2$ ) of tread-pressure howed more large value than that inthe control one (1.68kg/$cm^2$ ) and those in the 20-0time-per-diem plot (12.27kg/$cm^2$ ) and the 30-time-per-diem one (20.05kg/$cm^2$ ) small values than that of the control plot. Especially, the growth of roots and spikes was extremely repressed. The number of leaves, scapes and lateral buds tend to increase in the tread-pressure of 20 times/day (12.27kg/$cm^2$ ) and 30 times/day (20.05kg/$cm^2$ ). The water contents of roots along the increase of tread-pressure to continuosly decreased. By the increase of tread-pressure, T/R ratio and C/F ratio their group decreased. The plant growth (7.33kg/$cm^2$ ) in the 10-time-per-diem plot increased more than that in the control one is regarded as the effect of tread-pressure affection on the road-side distribution of this plant.

• 한국유체기계학회 논문집
• /
• 제5권3호
• /
• pp.15-24
• /
• 2002

This paper presents an experimental study on the unsteady flow phenomena such as leakage flow and rotating stall which have influences on the performance and stability of an axial flow fan. For this study, unsteady pressure were measured using high frequency pressure transducers mounted on the easing wall of rotor passage and analyzed by Double Phase-Locked Averaging Technique. As the flow rate was reduced to near stall point, the pressure difference between the pressure and the suction side of the blade was increased especially new the leading edge and the lowest pressure zone of suction side was gradually developed. From the result of unsteady pressure field on the casing wall, one period of rotating stall was divided into three zones and the flow characteristics on each zone were described in detail.

• The Journal of Korean Physical Therapy
• /
• 제32권1호
• /
• pp.29-33
• /
• 2020

Purpose: This study examined the effects of the weight-bearing pattern and calcaneal taping on the heel width and plantar pressure in standing. Methods: Fifteen healthy subjects with normal feet participated in this study. The heel width was measured using a digital caliper, and a pedoscan was used to measure the plantar pressure of the rear foot while standing. The participants were instructed to stand in three weight-bearing patterns (anterior, middle, and posterior weight bearing) before and after calcaneal taping. The heel width and plantar pressure were measured three times before and three times after calcaneal taping, with the three weight-bearing patterns applied in random order. A 2 (non-taping vs. taping) × 3 (anterior, middle, posterior weight bearing) two-way repeated ANOVA with a Bonferroni post hoc correction was used to assess the differences in heel width and plantar pressure. Results: The results revealed a significant main effect of the weight-bearing pattern (p<.01), but not of calcaneal taping (p>.05). Greater weight bearing applied to the heel resulted in a significantly increased heel width and planter pressure of the rear foot (p<.01). Conclusion: In standing, a posterior weight-bearing pattern increases the heel width due to side-to-side shifting of the plantar heel pad, which increases the heel plantar pressure. Therefore, to prevent high stress on the heel pad and plantar heel pain, it is important to refrain from posterior weight bearing while standing during the activities of daily living.

• 설비공학논문집
• /
• 제29권3호
• /
• pp.127-133
• /
• 2017

Performance analysis has been carried out on a high side scroll compressor that had a fixed scroll equipped with a circular oil groove on its thrust surface. Oil was supplied to the oil groove through an intermittent opening from a high pressure oil reservoir formed inside the orbiting scroll hub. Oil in the groove was then delivered to both suction and back pressure chambers by pressure differentials and viscous pumping action of the orbiting scroll base plate. Mathematical modeling of this oil groove system was incorporated into a main compressor performance simulation program for an optimum oil groove design. The study findings were as follows. Pressure in the oil groove can be controlled by changing its configuration and the oil passage area. With an enlarged oil passage, the pressure in the oil groove heightens due to an increased flow rate, but the pressure elevation in the back pressure chamber is small, resulting in reduced friction loss at the thrust surface between the two scrolls. On the other hand, by increasing the oil passage area, the oil content in the refrigerant flow increases. Considering all these factors, the energy efficiency ratio could be improved by about 3.6% under the ARI condition by an optimal oil groove design.

• The Journal of Korean Physical Therapy
• /
• 제36권1호
• /
• pp.27-32
• /
• 2024

Purpose: This study was conducted to verify the effect of applying a pressure biofeedback unit on walking ability and knee joint function while performing knee joint extensor strengthening exercises using resistance exercise equipment in total knee replacement (TKR) patients. Methods: This study was conducted on twelve patients receiving rehabilitation treatment after being admitted to a rehabilitation hospital post-TKR. Of these, six were allocated to a feedback group with a pressure biofeedback unit, and the other 6 were allocated to a control group without a pressure biofeedback unit. The subjects performed an exercise program for 45 minutes per session, five times a week, for two weeks. Walking ability and knee joint function were evaluated and analyzed before and after exercise. Results: The feedback group showed significantly better improvements in walking speed, gait cycle, step length on the non-operation side, time on the foot on the operation side, K-WOMAC stiffness, and K-WOMAC function than the control group (p<0.05). Conclusion: When strengthening the knee joint extensor muscles using resistance exercise equipment in TKR patients, the provision of a pressure biofeedback unit was found to improve walking ability and knee joint function by inducing concentric-eccentric contraction of the knee joint extensor muscles. Therefore, the study shows that exercise based on the provision of a pressure biofeedback unit should be considered when strengthening knee joint extensor muscles to improve the walking ability and knee joint function of TKR patients in clinical practice.

• The Korean Journal of Pain
• /
• 제3권1호
• /
• pp.27-33
• /
• 1990

성상신경절차단이 혈역학적 변화 및 차단부위의 피부온도에 마치는 영향을 알아보기 위하여 두경부와 어깨 및 상지에 통증을 호소하는 환자 45명 (남자 16명, 여자29명)을 대상으로 편측 성상신경절차단을 시행해 보았던 바 다음과 같은 결과를 얻었다. 1) 혈압의 변화 : 우측 성상신경절차단과 좌측 성상신경절차단의 어느 경우에서도 수축기 및 이완기 혈압에 마치는 영향은 거의 없었다. 2) 맥박수의 변화 : 우측 성상신경절차단후 30분과 60분에 각각 의의있는 맥박수의 감소를 나타내었으나 (p<0.05), 좌측 차단후에는 통계학적으로 의의있는 맥박수의 감소를 나타내지 않았다. 3) 차단측 상지피부온도의 변화 : 우측 성상신경절차단후에는 5분부터, 좌측차단후에는 10분부터 의의있는 피부온도의 상승 (p<0.01)을 보이기 시작하여 차단후 30분에 양측 모두에서 피부온도가 최대로 상승되었다가 60분에는 30분치에 비해 다소 하락하였다. 4) 시술환자 45명중 4명에서 성상신경절차단의 징후는 나타났으나 차단측상지의 피부온도 상숭은 동반되지 않았다. 이상의 결과로 미루어보아 제 6 경추 전결절에서 1.0% lidocaine 10 ml로 편측 성상신경절차단시에는 심순환계에 특별한 영향을 마치지 않았으며 또한 상지질환의 치료목적시에는 반드시 차단즉 상지피부온도의 상승을 확인하여야만 효과있는 차단이 이루어졌다고 판정할 수 있을 것으로 사료된다.

• 멤브레인
• /
• 제27권4호
• /
• pp.367-373
• /
• 2017

중공사형 정밀여과(MF)와 한외여과(UF)를 포함한 가압식 막여과 시스템은 높은 수준의 병원균 제거 효율로 인해 음용수 처리에 점점 더 많이 사용되고 있다. 그러나 가압식 막여과 시스템에서 분리막의 손상으로 인한 막완결성의 문제가 발생시 병원체가 유출될 수 있으므로, 효과적인 온라인 또는 오프라인 방식의 막 완결성 모니터링 방법을 통해 수질의 안정성을 보장하여야 한다. 최근 막 완결성 시험 중 하나 인 압력손실시험(pressure decay test, PDT)이 가압식 분리막 모듈을 이용한 음용수 처리 시설에 적용되고 있다. 이 논문에서는 PDT의 기체 주입방법에 따른 세 가지 조건으로 원수 측, 여과수 측, 원수 여과수 양방향 측 세 가지 조건을 선정 후 이에 따른 감지감도를 이론값과 실험값을 적용하여 비교하였다. 실험결과 가압되는 측의 부피와 감도는 반비례함을 확인하였고, 주입부의 반대방향에 부압을 형성 시에도 감도가 증가함을 확인할 수 있다. 즉 막 손상의 감지감도는 주입되는 부분의 체적이 작아질수록, 분리막을 경계로 유입과 여과 측의 압력차가 클수록 높아짐을 알 수 있었다.

• 대한치과교정학회지
• /
• 제9권1호
• /
• pp.99-103
• /
• 1979

For the purpose of investigating the response of the periodontal tissue in relation to the experimental tooth movement, the rats were inhibited from collagen formation by adminstration of aminoacetonitrile. Findings were as follows: 1) In experimental group, the principal fibers of the periodontal ligament came to run parallel along the alveolar bone or root surface on the pressure side, while the decrease in density, irregular arrangement, and partial loss of principal fibers were observed on the tension side. 2) Sharpey's fibers at the alveolar bone decreased in number, and as the aminoacetonitrile administration continued, the capability of matrix formation decreased on the tension side, the narrowing of the alveolar septum and poor-bony trabeculation appeared on the pressure side. 3) In cementum, Sharpey's fibers were distributed irregularly. The formation of acellura cementum was decreased on the tension side, while the formative capability of cellular cementum was increased. 4) The degree of staining by Herovici technique decreased in the periodontal membrane. By PAS and ninhydrine -Schiff reaction it was appeared weakly positive in the region where the Sharpey's fibers existed.

• 한국구조물진단유지관리공학회 논문집
• /
• 제6권2호
• /
• pp.175-182
• /
• 2002

The cement injection technology on the purpose of ground reinforcement and cut-off has been used in construction sites until now. However, recently it is applied to prevent leakage of underground structure. In this study, applicability of the back side waterproof grouting method was verified through performing field model tests and reviewing case histories. From the results of this study, injection shape of the back side waterproof grouting method was appeared to be root type, and waterproof effect by injection of cement grout material was excellent because grout material infiltrated into boundary between wall of structure and back side ground to be waterproof layer. Components influencing infiltration of injection material are type of soil and degree of compaction. For effective injection, injection pressure has to vary gradually from high pressure to low pessure and small quantity of injection material has to be injected for long times. Also, spacing of injection hole must be designed considering condition of back side ground, injection area, W/C ratio, the number of injection and injection pattern properly.

• Korean Chemical Engineering Research
• /
• 제48권5호
• /
• pp.598-602
• /
• 2010

본 논문에서는 다량의 수소를 포함한 다성분계 원료가스로부터 수소를 분리해 내는 분리막 시스템에 대하여 CFD 모델링과 모사를 수행하였다. 분리막 시스템은 환형 실린더 타입으로 원료가스의 유입을 위한 외부 lumen side와 sweeping gas가 유입되는 내부 permeation side로 구성된다. Lumen side의 운전온도와 압력은 $374^{\circ}C$, 7 기압 permeation side의 sweeping gas의 도입 온도와 압력은 $374^{\circ}C$, 3기압이며, 이러한 조건에서 운전이 가능한 Pd 분리막을 사용하였다. Sweeping gas의 흐름 방향에 따른 향류 및 병류 흐름에 대하여 각각 CFD 모사를 수행하였으며 수소 몰분율, 수소분압, 수소 플럭스 등에 대하여 결과를 비교하였다. 또한 lumen side의 원료가스 도입유속을 변화시켜 모사를 수행하고, 이에 따른 막분리 시스템의 효율을 비교하고 이에 대하여 고찰하였다.