• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.10
• /
• pp.845-849
• /
• 2013

In this paper, we design local signals to remove side-peaks in the binary offset carrier (BOC) autocorrelation. Specifically, we first investigate why local signals of the conventional schemes are applicable to either sine or cosine-phased BOC signals, and then, design local signals applicable to both sine and cosine-phased BOC signals. Finally, we obtain two partial correlations and propose a correlation function with no side-peak via a combination of the partial correlations. From numerical results, we demonstrate that the designed local signals are applicable to both sine and cosine-phased BOC signals and can remove side-peaks completely.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.29 no.4
• /
• pp.1-7
• /
• 2006

This study determined the optimal positions of the movable steering wheel and pedal systems of industrial vehicle by various body dimensions. The position of objects and starting driving posture were measured by Martin-type anthropometer and goniometer. The X, Y and Z axis of movable steering wheel and pedal systems were measured horizon distance from right side to left side, horizon distance from front side to rear side and vertical distance from floor to ceiling. During the experiment in order to exclude learning effectiveness with forklift driving, 27 subjects who had male not experiences in driving a forklift used in the experiment. The relationship between the position of steering wheel and driver's posture with body dimensions was analyzed by using correlation relation and paired comparison t-test based on the measured data. The pedal location in X and Z axises was not related with various body dimensions. Also, the steering wheel was different among the angles of the right elbow and shoulder depending on the various body dimensions.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2008.11a
• /
• pp.279-282
• /
• 2008

단백질의 구조는 그 기능과 밀접히 연관되어 있기 때문에 구조에 조금이라도 변화가 생기면 바로 생체기능에 이상이 생긴다. 그래서 단백질 구조연구는 필수적이고 구조의 유사성 검색을 이용하여 단백질 기능을 예측한다. 그러나 전체적인 구조가 유사한 단백질이라도 기능에 중요한 특정구조가 다르게 되면 다른 기능을 수행 할 수 있고 구조가 다른 단백질이라도 핵심 영역의 구조가 유사하다면 유사한 기능을 수행할 수 있다. 이는 단백질의 기능이 특정 하위구조의 잘 보존된 활성 사이트에 따라 결정되기 때문이다. 이 논문은 단백질의 3차원 공간정보를 matrix로 표현 할 수 있는 가장 작은 평면도형인 삼각형을 이용하여 단백질 표면에 대한 상세한 형태비교를 제공한다. 단백질 표면에서 활성 사이트 아미노산 잔기의 side chain은 일반적으로 바깥을 향하여 표면의 형태를 결정짓기 때문에 단백질 표면을 비교하기 위해 side chain 정보가 필수적이다. 우리는 아미노산 잔기의 Cα원자에 side chain을 포함하여 Cα삼각형과 side chain 삼각형 2개를 하나의 특정하위구조 set으로 정의하고 이 하위구조로 distance matrix를 구축한다. 만들어진 distance matrix에 RMSD를 이용하여 활성 사이트의 표면을 비교한다. 제시한 기법은 단백질의 전체적인 서열과 구조 정보를 이용하지 않고, 활성 사이트의 특정하위 영역만을 고려함으로써 더욱 효과적이고 빠른 시간 내에 상세한 비교를 수행할 수 있다.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2004.07a
• /
• pp.170-170
• /
• 2004

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.3
• /
• pp.276-282
• /
• 2003

OFDM is effective for the high speed data transmission. However, the nonlinear distortion is a serious problem because of the high PAPR due to many subcarriers. The conventional SLM selects the OFDM signal with the lowest PAPR. In this method, OFDM data can be correctly recovered only if the side information about the phase sequence is transmitted to receiver. This paper proposes a new method of side information insertion into the conventional SLM and reduces the computational complexity by adaptive method. Performances are compared in case that three kinds of phase sequences are used for phase rotation factor. The adaptive SLM method has the same PAPR reduction as the conventional SLM method. The required BER can be guaranteed by the proposed method. When subcarrier number N=32, computational complexity is reduced to 48 %, 72 % and 51 % for the branch number U=4, 8 and 16, respectively.

• The Journal of Korea Robotics Society
• /
• v.12 no.4
• /
• pp.385-394
• /
• 2017

Side scanning sonar (SSS) provides valuable information for robot navigation. However using the side scanning sonar images in the navigation was not fully studied. In this paper, we use range data, and side scanning sonar images from UnderWater Simulator (UWSim) and propose measurement models in a feature based simultaneous localization and mapping (SLAM) framework. The range data is obtained by echosounder and sidescanning sonar images from side scan sonar module for UWSim. For the feature, we used the A-KAZE feature for the SSS image matching and adjusting the relative robot pose by SSS bundle adjustment (BA) with Ceres solver. We use BA for the loop closure constraint of pose-graph SLAM. We used the Incremental Smoothing and Mapping (iSAM) to optimize the graph. The optimized trajectory was compared against the dead reckoning (DR).

• Korean Journal of Human Ecology
• /
• v.7 no.4
• /
• pp.55-69
• /
• 2004

The purpose of this study is to reduce the side effect of functional health foods. The research is done by in-depth interview method. The nineteen officials who worked in local administration or KFDA(Korea Food & Drug Administration) were interviewed. The questions were asked regarding the current status of consumer reports related to functional health foods, the problems which officials perceived, and the regulations required to reduce the problems. The findings are as follows: 1) the consumers report the side effect of functional health foods to nongovernmental organization. 2) officials feel that the problems are the difficulty in finding the cause of the side effect, unjust sale tactics, deceptive and small-sized manufacturers. and the distorted consumer conception on functional health foods. 3) officials think that improvement on the regulations are required to reduce the problems caused by the side effects. It includes the indication of the ingredient's origin and warnings considering physical conditions, close cowork between administration and nongovernmental organization. introduction of sales license for functional health foods and the increase of the opportunity for consumers to get information and education on functional health foods.

• Journal of Information Technology Services
• /
• v.1 no.1
• /
• pp.67-80
• /
• 2002

This study aims to explore the ways of reinforcing the competitive edge and substance of company through e-business in furniture industry by presenting the e-business model of furniture industry which faces the opportunity of challenge in the course of industrial restructuring. e-business model can take various types depending on the environment, feature and competitive edge that each company faces. For example, it is general in the fields of manufacturing company to study the model by dividing into Sell Side for sales to the customers, and Buy Side for purchase of raw materials, Integrating both sides. In furniture industry, Sell Side has the feature of giving a priority in the quality and price rather than brand image in the purchase type of consumer. Especially, it shall not be overlooked that majority of furniture is delivered to the consumer indirectly through the construction company. As such, e-business should be promoted in a way to expand the point of contact for consumers, rather than to construct its own point of contact for consumers. The percentage of importation of raw lumber is high and the standardization was insufficient in Buy Side.

• ETRI Journal
• /
• v.30 no.1
• /
• pp.68-80
• /
• 2008

Since many efficient algorithms for implementing pairings have been proposed such as ${\eta}_T$ pairing and the Ate pairing, pairings could be used in constraint devices such as smart cards. However, the secure implementation of pairings has not been thoroughly investigated. In this paper, we investigate the security of ${\eta}_T$ pairing over binary fields in the context of side-channel attacks. We propose efficient and secure ${\eta}_T$ pairing algorithms using randomized projective coordinate systems for computing the pairing.

• IEIE Transactions on Smart Processing and Computing
• /
• v.5 no.6
• /
• pp.418-429
• /
• 2016

In this paper, we propose a hybrid Wyner-Ziv video coding structure that combines conventional motion predictive video coding and Wyner-Ziv video coding to eliminate the feedback channel, which is a major practical problem in applications using the Wyner-Ziv video coding approach. The proposed method divides a hybrid frame into two regions. One is coded by a motion predictive video coder, and the other by the Wyner-Ziv coding method. The proposed encoder estimates side information with low computational complexity, using the coding information of the motion predictive coded region, and estimates the number of syndrome bits required to decode the region. The decoder generates side information using the same method as the encoder, which also reduces the computational complexity in the decoder. Experimental results show that the proposed method can eliminate the feedback channel without incurring a significant rate-distortion performance loss.