• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.7
• /
• pp.930-937
• /
• 2011

The characteristics of mean velocity and turbulence have been analyzed in the circular open channel flow using PIV measurement data for a wide range of water depth. The measured data are fitted to a velocity distribution function over the whole depth of the open channel. Reynolds shear stress and mean velocity in wall unit are compared with the analytic models for fully-developed turbulent boundary layer. Both the mean velocity and Reynolds shear stress have different distributions from the two-dimensional boundary layer flow when the water depth increases over 50% since the influence of the side wall penetrates more deeply into the free surface. The cross-stream Reynolds normal stress also has considerably different distribution in view of its peak value and decreasing rate in the outer region whether the water depth is higher than 50% or not.

• Journal of information and communication convergence engineering
• /
• v.9 no.2
• /
• pp.193-196
• /
• 2011

Transmit antenna selection techniques are prominent since they exploit the spatial selectivity at the transmitter side. In the literature, antenna selection techniques assume full knowledge of the channel state information (CSI). In this paper, we consider that the CSI is not perfectly known at the transmitter; however, a quantized version of the channel coefficients is fed back by the users. We employ the non-uniform Lloyd-Max quantization algorithm which takes into consideration the distribution of the channel coefficients. Simulation results show that the degradation in the BER of the system with imperfect CSI at the transmitter is tolerable, especially when the transmit diversity order is high.

• MALSORI
• /
• no.53
• /
• pp.157-169
• /
• 2005

This paper proposes an efficiently representing method of spatial cues on multichannel spatial audio coding. The Binaural Cue Coding (BCC) method introduced recently represents multichannel audio signals by means of Inter Channel Level Difference (ICLD) or Source Index (SI). We tried to express more efficiently ICLD and SI information based on Inter Channel Correlation in this paper. We adopt different spatial cues according to ICC and propose a compensation method of empty spectrums created by using SI. We performed a MOS test and measuring spectral distortion. The results show that the proposed method can reduce the bitrate of side information without large degradation of the audio quality.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.31 no.5
• /
• pp.491-498
• /
• 2007

Flame characteristics of a methane-air premixed flame stabilized in a heat-regenerative small combustor were investigated experimentally. A small combustor having two counter-current shallow channels and a combustion space at one side was developed. In which the channel-gap was less the ordinary quenching distance of a stoichiometric methane-air premixed flame. Two design parameters of channel gap and thickness of the middle wall, which is located between two channels for unburned and burned gases, were varied. Flame stabilization conditions and characteristic flame behaviors were experimentally examined. Conclusively, Blowout conditions were governed mostly by the scale of the combustion space, and flashback conditions into the channel are dominated by the channel gap. Surface temperatures of the combustor were between 100 to 500$^{\circ}C$. Additionally, two distinctive flame stabilization modes of radiation and well-stirred?reaction were observed and their applicability was discussed.

• ETRI Journal
• /
• v.28 no.5
• /
• pp.545-554
• /
• 2006

A widely tunable multi-channel grating cavity laser is proposed and experimentally demonstrated. The device is implemented in Littman configuration with an echelle grating based on Rowland circle construction and realized by monolithically integrating all elements in an InP substrate. Lasing wavelength is selected by turning on an amplifier and the appropriate channel element in the array, and it is tuned by controlling light deflection electrically. The 6-channel device exhibits a tuning range of about 50 nm with a side mode suppression ratio of more than 30 dB. This is accomplished by adjusting the applied current of the dispersive element and phase control section.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.05a
• /
• pp.465-468
• /
• 2008

In this paper, ABAQUS, one of the implicit finite element codes, is used to analyze the U-channel Draw benchmark problem of NUMISHEET 2005. Forming and springback stages have been done consecutively to compare their results with the experimental ones. The main measures for comparing are the side wall curl and angle. The result by numerical analysis are shown generally to be correspondent with the experimental results that the max. error is confined under about 10%.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.06a
• /
• pp.81-84
• /
• 2006

To investigate the characteristics of water droplet on the gas diffusion layer from both upper-view and side-view of flow channel, a rig test apparatus was designed and fabricated with L-shape acryl plate in a $1mm{\times}1mm$ micro-channel. This experimental device is used to simulate the single droplet growth and its transport process under fuel cell operating condition. As a first step, we investigated the growth and transport of single water droplet with working temperature and air flow velocity. The contact angle and its hysteresis of water droplet at departing moment are measured and analyzed. It is expected that this study can provide the basic understanding of liquid water droplet behavior in gas flow channel and GDL interface during the PEM fuel cell operation.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.11
• /
• pp.5304-5322
• /
• 2018

Since designing a feedback topology is a practical way to implement interference alignment at reduced cost of channel state information (CSI) feedback, six feedback topologies have been presented in prior works for a K-user multiple-input multiple-output interference channel. To fully reveal the potential benefits of the feedback topology in terms of the saving of CSI overhead, we propose a new feedback topology in this paper. By efficiently performing dimensionality-decreasing at the transmitter side and aligning interference signals at a subset of receivers, we show that the proposed feedback topology obtains substantial reduction of feedback cost over the existing six feedback designs under the same antenna configuration.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.27 no.4
• /
• pp.961-970
• /
• 2017

The differential power analysis calculates the intermediate value related to sensitive information and substitute into the power model to obtain (hypothesized) power consumption. After analyzing the calculated power consumption and measuring power consumption, the secret information value can be obtained. Hamming weight and hamming distance models are most commonly used power consumption model, and the power consumption model is obtained through the modeling technique. If the power consumption model assumed by the actual equipment differs from the power consumption of the actual equipment, the side channel analysis performance is declined. In this paper, we propose a method that records measured power consumption and exploits as power consumption model. The proposed method uses the power consumption at the time when the information (plain text, cipher text, etc.) available in the encryption process. The proposed method does not need template in advance and uses the power consumption measured by the actual equipment, so it accurately reflects the power consumption model of the equipment.. Simulation and experiments show that by using our proposed method, side channel analysis is improved on the existing power modeling method.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.28 no.5
• /
• pp.1079-1087
• /
• 2018

Binary scalar multiplication which is the main operation of elliptic curve cryptography is vulnerable to the side-channel analysis. Especially, it is vulnerable to the side-channel analysis which uses power consumption and electromagnetic emission patterns. Thus, various countermeasures have been studied. However, they have focused on eliminating patterns of data dependent branches, statistical characteristic according to intermediate values, or the interrelationships between data. No countermeasure have been taken into account for the secure design of the key bit check phase, although the secret scalar bits are directly loaded during that phase. Therefore, in this paper, we demonstrate that we can extract secret scalar bits with 100% success rate using a single power or a single electromagnetic trace by performing key bit-dependent attack on hardware implementation of binary scalar multiplication algorithm. Experiments are focused on the $Montgomery-L{\acute{o}}pez-Dahab$ ladder algorithm protected by scalar randomization. Our attack does not require sophisticated pre-processing and can defeat existing countermeasures using a single-trace. As a result, we propose a countermeasure and suggest that it should be applied.