• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.6
• /
• pp.483-488
• /
• 2007

The aerodynamic characteristics of FAST(Future Air Speed Transit) combined the body with tandem wing flying over nonplanar ground surface are investigated by using a boundary element method. To validate the present method, results of the present analysis are compared with the experiment and other numerical results. The arrangement of the tandem wing is determined to secure sufficient aero-levitation force and the stability through the analysis of the aerodynamic characteristics of the FAST. The FAST has the maximum lift characteristics when the tandem wing with lower endplate is located at the front side and the rear side of the body. The stability of the FAST can be secured by using the flaperon of the tandem wing.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.8 no.2
• /
• pp.259-267
• /
• 2004

Most steel frame structures are constructed to one side without considering the arrangement of major-minor axis of column and bracing. This research presents more safety and economic efficiency can be obtained by just rearrangement of major-minor axis. Because most of steel-frame structures are excessively designed with Allowable Stress Design, and it needs to be changed to other specifications. The arrangement of major-minor axis of column is partly referred in AISC-LRFD, but still insufficient. This study compared with the each result from rearrangement of major-minor axis of column, arrangement of bracing, the connecting method of bracing, and consequence with different specifications. Moreover it demonstrated the direction of more economically optimized design.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.6
• /
• pp.210-218
• /
• 2019

Recently, cable-stayed bridges have been attempting to apply bold and experimental shapes for aesthetic and originality. In the case of bridges that have no similar cases, deep understanding and verification of analytical modeling is needed. S-shaped curved pedestrian cable-stayed bridge is always twisted because the cable is arranged on one side of the inverted triangular truss girder. In order to suppress the torsion, the Link-shoes are arranged at the left and right top members with reference to the Bearing placed at the mid-bottom member. The first research is related to the modeling method of Link-Shoe and Diaphram. In order to accurately reflect the transverse structural system and the torsional stiffness, it was necessary to model the Link-Shoe and the Diaphram directly rather than indirectly using the stiffness of the Bearing. The second study is related to the lateral arrangement of Bearing and Link-Shoes. Method 1 is to place in order of Link-shoe, Bearing, and Link-shoe from outside the curve radius. Method 2 is place to in order of Bearing, Bearing, and Link-shoe. In method 2, compared to method 1, the stress in the outer top member was larger and the stress in the inner one was decreased. It is analyzed that the stress adjustment is possible according to the lateral arrangement of Bearing and Link-Shoe.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.12
• /
• pp.38-46
• /
• 2010

For the development of 100[W] stage lighting, quantitative and uniform color mixing that applied through color adopted Simple-Inverse matching so that color mixing can be possible along Black Body Locus. R,G,B(Red, Green, Blue) LED(Light Emitting Diode) arrangement through LED package character analysis, LED module, and the characteristic of device were considered for uniform color mixing. A distance changeable optical device was built to assure high uniformity and high diffusion of not only the middle of diffusion side but also the border side. Also, we developed the control power circuit that can expand up to 6 channels which are possible for quantitative color mixing, and the high uniformity and high quantified border light for color mixing control and the verification of color mixing characteristics by composing GUI(Graphical user interface) including color mixing simulator. By presenting the experimental results of light color control, we proved the usefulness of our developed border light and the proposed color mixing method.

• Journal of Pharmacopuncture
• /
• v.6 no.3
• /
• pp.15-21
• /
• 2003

Background : This study focuses on the new acupuncture method of embedding method which inserts a substance on the acupuncture points for continuous stimulation. Clinical applications and cautions were examined through literary investigations. Results : Based on the literary consideration of embedding method, the following results were obtained : 1. Embedding method is a combination of traditional and embedding technique to provide longer duration of stimulation on the acupuncture points. 2. To administer the embedding method, one needs to utilize a embedding thread besides acupuncture apparatus. Sheep gut is commonly used in China and the surgical thread is the choice in Korea. 3. Embedding method may vary from the patient to patient, depending on the nature and location of the illness. Piercing, embedding, and tying are some of the possibilities. 4. Embedding method may have different arrangement of threads based on the choice of usage. 5. Embedding method is effective for various chronic illnesses such as aches, functional diseases, and the diseases of internal organs. 6. When using the embedding methods, cautions against infection and side effects due to strong stimulation are mandatory.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.178-183
• /
• 2003

This paper deals with transmission loss characteristics of the panel type silencer to control low frequency noise. The panel type silencer is composed of many Helmholtz resonators by side branch. Each resonator has high transmission loss on the narrow band of its resonance frequency. Direct arrangement of the resonators increases mainly the magnitude of transmission loss. If we arrange the resonators in a row, the peak and band of transmission loss are increased. This makes the resonator array to have high transmission loss in the broader band. Using this idea, we design a silencer that has broader band characteristics and smaller volume.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.13 no.2
• /
• pp.107-118
• /
• 2005

An experimental investigation was made to study two-phase flow distribution in a T-type distributor of slit fin-and-tube heat exchanger using R-22. Experiments were carried out under the conditions of saturation temperature of $5^{\circ}C$ and mass flow rate varying from 0.6 to 1.2kg/min. The inlet air has dry bulb temperature of $27^{\circ}C$, relative humidity of 50% and air velocity varying from 0.63 to 1.71m/s. A comparison was made between the predictions from the previously proposed tube-by-tube method and the present experimental data for the heat transfer rate of evaporator. Results show that $82.5\%$ increase of air velocity is needed for T-type distributor with four outlet branches than that of two outlet branches under the superheat of $5^{\circ}C$, which resulted in increasing of air-side pressure drop of $130\%$ for the former as compared to the latter.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.31 no.6 s.261
• /
• pp.547-557
• /
• 2007

This study was conducted to investigate the flow and combustion characteristic of the experimental burner which was manufactured for the reflection of the oven and broil burner features. As slot shape, spacing between slots, and slot arrangement of the exit area which emits the mixing gas are different in case of oven burners and broil turners, the purpose of this study is to know the affection of the flame interaction and combustion characteristic according to the change of shape factors such as slot shape, slot arrangement, and slot-to-slot spacing. With no relation of the slot shape, as the spacing between slots became narrow, the occurrence of a lift-flame was delayed. So the combustion was possible in the leaner region, but the appearance of yellow-tip became a little fast. Slit slot port had the broadest operating range among the other slot shapes. Specially, from the side of lift-flame, as the jet that spreads downstream in the longitudinal slot was nearly circular just a few slot lengths away from the orifice, slot-to-slot spacing of the Slit port was closer than the other ports. These results could be expected through the computer numerical method and had a good agreement. As the spacing between slots increased, in case of Slit and Mix port, NOx emission rate was constant or decreased, but the NOx emission of Hole port was increased. CO emission rate of Slit and Hole port was increased as the slot-to-slot spacing was broadened.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2007.05a
• /
• pp.137-142
• /
• 2007

Currently, brand apartment is positioning itself as one of the representative Korean housing. This allows to look into the planning side and cultural side of the Korean housing. The purpose of this study is to review the previous trend in apartment housing according to period, and to verify the trend of current Korean apartment housing by visiting the model houses in PanGyo, the new city. This study has chosen case study method of 11 cases which had been sorted out in different floor plan type and size. The findings of the study is as followed. In the aspect of spatial arrangement, it had been similar to the previous apartment plan but had a new attempt to break out from the old apartment structure by bring in round shaped living room. Also, due to the legalization of balcony expansion, various tries had been made to increase the level of function and to allow variety of usage. In the environmental aspect, the concept of wellbeing and health had been a great importance in apartment planning. In the digital aspect, various digital systems had been introduce for convenience and safety via home network system. Furthermore, based on the various lifestyle, the storytelling design concept applied in the interior design, which will have to effect the future model house design planning. Nonetheless, the current emphasis on universal design is expected to be treated one of the important concept in Korean apartment planning. This study has a significant meaning on readdressing current trend in Korean housing and to provide informations for future directions on Korean apartment planning.

• Korean Journal of Veterinary Research
• /
• v.13 no.2
• /
• pp.103-109
• /
• 1973

By employing the vinylite and neoprene latex corrosion technique, the ramification and arrangement of A. renalis were observed in fifty adult dogs (100 kidneys). Obtained results were as follows: 1. In the dog a single renal artery arosed on each side from abdominal aorta in 99% and double renal arteries in 1%, a single bifurcated into the ramus dorsalis and ramps ventralis from which 2-6 segmental arteries originated. 2. The dorsal ventral planes of the kidney were divided separately into 3-6 vascular segments by the segmental artery into the parenchyma. Of them four segments were mostly frequent (in 73% of right kidney and 72% of left). 3. The ramifying method of the segmental artery from the ramus dorsalis et ventralis was divided 3 types and 12 kinds. 4. In 30 of 100 kidneys, either dorsal or ventral plane of a kidney was supplied from interlobar or segmental arteries belonging to the opposite ramps. In 29 of them, the dorsal plane was supplied from the ventral ramus. 5. Six right and 11 left kidneys had a common segment in the Extremitas cranialis of the kidney.