• Title/Summary/Keyword: SiO

Search Result 10,122, Processing Time 0.037 seconds

Characteristics of Adhesive Disks in Parthenocissus tricuspidata during Attachment (착생에 따른 담쟁이덩굴 흡착근의 부착 특성)

  • Lee, Myung-Hui;Kim, In-Sun
    • Applied Microscopy
    • /
    • v.41 no.2
    • /
    • pp.139-145
    • /
    • 2011
  • Parthenocissus tricuspidata is an epiphyte that lacks a main axial stem, but develops adhesive disks along the stem for climbing support. In this study, scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS) were utilized to examine the brick wall surface and the adhesive disks of P. tricuspidata that attached to the surface successfully. The study was mainly focused the outermost layers of both structures before and after adhesion to find out whether there has been some structural and/or physical interactions between the two. The adhesive disks adhered firmly to the brick wall by secreting adhesive materials that help them for a tight attachment to the surface. The rough wall surface appeared facilitating better attachment of the adhesive disks by infiltrating the materials into those spaces leading to some degree of interactions at the interface. EDS analysis on the outermost layers of the adhesive disks that were separated from the substrates was also consistent with the SEM data on the interaction between the adhesive disks and the substrate surface. EDS analysis of the brick wall surface and the adhesive disks demonstrated similar elements of O, Si, Fe, Al, K, Mg, and Na in their components.

Variation in Larvae Development and Moth Emergence of Striped Rice Borer (Chilo suppressalis Walker) and Damages in Rice Cultivars under Different Levels of Nitrogen and Silicate Fertilizers (질소 및 규산시비수준에 따른 수도품종간 이화명충의 발육ㆍ우화 및 피해정도의 변이)

  • 손상목;김기준
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.27 no.1
    • /
    • pp.11-19
    • /
    • 1982
  • The average weight of larvae, the percentage of survival larvae and the percentage of moth emergence in first and second generation of striped rice borer showed lower values in Akibare(Japonica variety) compared with those in Milyang 23 (Indica variety). At higher nitrogen level the larvae weight in second generation of striped borer was increased. The percentage of survival larvae in second generation was gradually decreased by applying the silicate fertilizer in both cultivars. The moth emergences in both generations of striped rice borer were also lower at high levels of silicate fertilizer. The percentage of white head of rice plant was reduced by the application of silicate fertilizer. The ratio of SiO$_2$ to T-N of the rice stem was related negatively with the percentage of survival larvae and the moth emergence in second generation of striped rice borer, and also with the percentage of white head of rice plant.

  • PDF

Column-aware Transaction Management Scheme for Column-Oriented Databases (컬럼-지향 데이터베이스를 위한 컬럼-인지 트랜잭션 관리 기법)

  • Byun, Si-Woo
    • Journal of Internet Computing and Services
    • /
    • v.15 no.4
    • /
    • pp.125-133
    • /
    • 2014
  • The column-oriented database storage is a very advanced model for large-volume data analysis systems because of its superior I/O performance. Traditional data storages exploit row-oriented storage where the attributes of a record are placed contiguously in hard disk for fast write operations. However, for search-mostly datawarehouse systems, column-oriented storage has become a more proper model because of its superior read performance. Recently, solid state drive using MLC flash memory is largely recognized as the preferred storage media for high-speed data analysis systems. The features of non-volatility, low power consumption, and fast access time for read operations are sufficient grounds to support flash memory as major storage components of modern database servers. However, we need to improve traditional transaction management scheme due to the relatively slow characteristics of column compression and flash operation as compared to RAM memory. In this research, we propose a new scheme called Column-aware Multi-Version Locking (CaMVL) scheme for efficient transaction processing. CaMVL improves transaction performance by using compression lock and multi version reads for efficiently handling slow flash write/erase operation in lock management process. We also propose a simulation model to show the performance of CaMVL. Based on the results of the performance evaluation, we conclude that CaMVL scheme outperforms the traditional scheme.

Lamellar Structured TaN Thin Films by UHV UBM Sputtering (초고진공 UBM 스퍼터링으로 제조된 라멜라 구조 TaN 박막의 연구)

  • Lee G. R.;Shin C. S.;Petrov I.;Greene J, E.;Lee J. J.
    • Journal of the Korean institute of surface engineering
    • /
    • v.38 no.2
    • /
    • pp.65-68
    • /
    • 2005
  • The effect of crystal orientation and microstructure on the mechanical properties of $TaN_x$ was investigated. $TaN_x$ films were grown on $SiO_2$ substrates by ultrahigh vacuum unbalanced magnetron sputter deposition in mixed $Ar/N_2$ discharges at 20 mTorr (2.67 Pa) and at $350^{\circ}C$. Unlike the Ti-N system, in which TiN is the terminal phase, a large number of N-rich phases in the Ta-N system could lead to layers which had nano-sized lamella structure of coherent cubic and hexagonal phases, with a correct choice of nitrogen fraction in the sputtering mixture and ion irradiation energy during growth. The preferred orientations and the micro-structure of $TaN_x$ layers were controlled by varing incident ion energy $E_i\;(=30eV\~50eV)$ and nitrogen fractions $f_{N2}\;(=0.1\~0.15)$. $TaN_x$ layers were grown on (0002)-Ti underlayer as a crystallographic template in order to relieve the stress on the films. The structure of the $TaN_x$ film transformed from Bl-NaCl $\delta-TaN_x$ to lamellar structured Bl-NaCl $\delta-TaN_x$ + hexagonal $\varepsilon-TaN_x$ or Bl-NaCl $\delta-TaN_x$ + hexagonal $\gamma-TaN_x$ with increasing the ion energy at the same nitrogen fraction $f_{N2}$. The hardness of the films also increased by the structural change. At the nitrogen fraction of $0.1\~0.125$, the structure of the $TaN_x$ films was changed from $\delta-TaN_x\;+\;\varepsilon-TaN_x\;to\;\delta-TaN_x\;+\;\gamma-TaN_x$ with increasing the ion energy. However, at the nitrogen fraction of 0.15 the film structure did not change from $\delta-TaN_x\;+\;\varepsilon-TaN_x$ over the whole range of the applied ion energy. The hardness increased significantly from 21.1 GPa to 45.5 GPa with increasing the ion energy.

Two Newly Naturalized Species in Korea: Lolium rigidum Gaudin (Poaceae) and Oenothera rosea L'Hér. ex Aiton (Onagraceae) (한반도 미기록 귀화식물: 댕돌보리와 애기분홍낮달맞이꽃)

  • Kim, Jung-Hyun;Kim, Jin-Seok;Nam, Gi-Heum;Yoon, Chang-Young;Kim, Sun-Yu
    • Korean Journal of Plant Resources
    • /
    • v.27 no.4
    • /
    • pp.326-332
    • /
    • 2014
  • Two unrecorded naturalized species, Lolium rigidum Gaudin (Poaceae) and Oenothera rosea L'H$\acute{e}$r. ex Aiton (Onagraceae) were newly reported in Korea. L. rigidum, 'Daeng-Dol-Bo-Ri', was found at roadside of Yesong beach, Yesong-ri, Bogil-myeon, and roadside of Myeongsasimni beach, Sin-ri, Sinji-myeon, in Wando-gun, Jeollanam-do. It was distinguished from L. mutiflorum Lam by spikelet 10-20 mm long, florets 2-10(-13), and obtuse lemma, awn absent or up to 3-8(-10) mm. O. rosea, 'Ae-Ki-Bun-Hong-Nat-Dal-Mat-I-Kkot', was found in side of Wondong wetland, Yongdang-ri, Wondong-myeon, Yangsan-si, Gyeongsangnam-do. This taxon was distinguishable from other Oenothera in Korea by following combination of characters, stem erect to ascending, petal 5-12 mm long, pink to bright purple. Descriptions and illustrations of the two taxa and their photographs in the habitat are provided along with a key to the species of Lolium and Oenothera from Korea.

Color Filter Based on a Sub-Wavelength Patterned Poly-Silicon Grating Fabricated using Laser Interference Lithography (광파장 이하의 주기를 갖는 다결정 실리콘 격자 기반의 컬러필터)

  • Yoon, Yeo-Taek;Lee, Hong-Shik;Lee, Sang-Shin;Kim, Sang-Hoon;Park, Joo-Do;Lee, Ki-Dong
    • Korean Journal of Optics and Photonics
    • /
    • v.19 no.1
    • /
    • pp.20-24
    • /
    • 2008
  • A color filter was proposed and demonstrated by incorporating a subwavelength patterned 1-dimensional grating in poly silicon. It was produced by employing the laser interference lithography method, providing much wider effective area compared to the conventional e-beam lithography. A $SiO_2$ layer was introduced on top of the silicon grating layer as a mask for the etching of the silicon, facilitating the etching of the silicon layer. It was theoretically found that the selectivity of the filter was also improved thanks to the oxide layer. The parameters for the designed device include the grating pitch of 450 nm, the grating height of 100 nm and the oxide-layer height of 200 nm. As for the fabricated filter, the spectral pass band corresponded to the blue color centered at 470 nm and the peak transmission was about 40%. Within the effective area of $3{\times}3mm^2$, the variation in the relative transmission efficiency and in the center wavelength was less than 10% and 2 nm respectively. Finally, the influence of the angle of the incident beam upon the transfer characteristics of the device was investigated in terms of the rate of the relative transmission efficiency, which was found to be equivalent to 1.5%/degree.

A Study on Temperature Dependence of Tunneling Magnetoresistance on Plasma Oxidation Time and Annealing Temperature (플라즈마 산화시간과 열처리 조건에 따른 터널링 자기저항비의 온도의존특성에 관한 연구)

  • Kim, Sung-Hoon;Lee, Seong-Rae
    • Journal of the Korean Magnetics Society
    • /
    • v.14 no.3
    • /
    • pp.99-104
    • /
    • 2004
  • We have studied to understand the barrier and interface qualities and structural changes through measuring temperature dependent spin-polarization as functions of plasma oxidation time and annealing time. Magnetic tunnel junctions consisting of SiO2$_2$/Ta 5/CoFe 17/IrMn 7.5/CoFe 5/Al 1.6-Ox/CoFe 5/Ta 5 (numbers in nm) were deposited and annealed when necessary. A 30 s,40 s oxidized sample showed the lowest spin-polarization values. It is presumed that tunneling electrons were depolarized and scattered by residual paramagnetic Al due to under-oxidation. On the contrary, a 60s, 70 s oxidized sample might have experienced over-oxidation, where partially oxidized magnetic dead layer was formed on top of the bottom CoFe electrode. The magnetic dead layer is known to increase the probability of spin-flip scattering. Therefore it showed a higher temperature dependence than that of the optimum sample (50 s oxidation). temperature dependence of 450 K annealed samples was improved when the as-deposited one compared. But the sample underwent 475 K and 500 K annealing exhibits inferior temperature dependence of spin-polarization, indicating that the over-annealed sample became microstucturally degraded.

Studies on the Effects of Ginseng Extract for Mucociliary Change in Mice Nasal Septum Epithelia Exposured to Sulfur Dioxide gas (인삼(人蔘) 추출액(抽出液)이 SO2 Gas에 폭로(暴露)된 새앙쥐 호흡기상피(呼吸器上皮)의 섬모(纖毛)변화에 미치는 영향(影響)에 관한 연구(硏究))

  • Kim, Moo-Kang;Cho, Sung-Whan;Ryu, Si-Yun;Lee, Geun-Jwa;Han, Kyong-O;Lee, Chul-Ho
    • Korean Journal of Veterinary Research
    • /
    • v.31 no.3
    • /
    • pp.241-251
    • /
    • 1991
  • In order to investigate the effect of Panax ginseng extract and it's degree in mucociliary change of mice nasal septum epithelia exposured to sulfur dioxide, 96 ICR male mice were used. They were at first divided the 4th week, the 8th week or the 16th week groups according to the age after birth and 6 hour or 12 hour groups according to the $SO_2$ gas exposured hour in a day, and at control, 50mg, 100mg and 200mg injection groups according to the dosage of the freeze-drying powder of the ginseng extract which was injected into the mouse peritoneal cavities in the condition of the solution solved with physiological saline solution. Each subgroups which were divided finaly included 4 male mice. The histological tissue sections for observation were made from nasal septum, posterior nasal orfice and trachea. The results obtained by experiments were summarized as followings. 1. The loss of the nasal mucosa epithelial cilia of the mouse exponsure to the $SO_2$ gas after ginseng extract injection was apparently diminish eompare to those exposured only $SO_2$ gas without pretreatment of ginseng extract (p<0.01). 2. The inhibition effect for the loss of nasal mucocilia according to the ginseng extract dosages not found in this research (p>0.05). 3. There were differences in the loss of nasal mucosa cilia according to the $SO_2$ gas exposure time between the control group and ginseng extract pretreatment group (p<0.01). 4. According to the increase of the postnatal time, there were remarkable differences between the control group and the ginseng extract pretreatment groups in the loss of nasal mucosa cilia (p<0.01). 5. Ciliary changes of the posterior nasal orifice and trachea according to the $SO_2$ gas exposure time, mice age and ginseng dosages, were not dearly observed in this light microscopical observation.

  • PDF

Swelling Ratio and Mechanical Properties of SBR/organoclay Nanocomposites according to the Mixing Temperature; using 3-Aminopropyltriethoxysilane as a Modifier and the Latex Method for Manufacturing (유기화제로 3-aminopropyltriethoxysilane 을 이용하여 라텍스법으로 제조된 SBR/organoclay 컴파운드의 혼련 온도에 따른 팽윤도 및 기계적 물성)

  • Kim, Wook-Soo;Park, Deuk-Joo;Kang, Yun-Hee;Ha, Ki-Ryong;Kim, Won-Ho
    • Elastomers and Composites
    • /
    • v.45 no.2
    • /
    • pp.112-121
    • /
    • 2010
  • In this study, styrene butadiene rubber(SBR)/organoclay nanocomposites were manufactured using the latex method with 3-aminopropyltriethoxysilane(APTES) as a modifier. The X-ray diffraction(XRD), transmission electron microscopy(TEM) images, Fourier transform infrared(FTIR) spectroscopy, swelling ratio and mechanical properties were measured in order to study the interaction between filler and rubber according to the mixing temperature in the internal mixer. In the case of SBR/APTES-MMT compounds, the dispersion of the silicates within the rubber matrix was enhanced, and thereby, the mechanical properties were improved. The characteristic bands of Si-O-C in APTES disappeared after hydrolysis reaction in the MMT-suspension solution and the peak of hydroxyl group was increased. Therefore the formation of chemical bonds between the hydroxyl group generated from APTES on the silicate surface and the ethoxy group of bis(triethoxysilylpropyl) tetrasulfide(TESPT) was possible. Consequently, the 300% modulus of SBR/APTES-MMT compounds was further improved in the case of using TESPT as a coupling agent. However, the silanization reaction between APTES and TESPT was not affected significantly according to the increase of mixing temperature in the internal mixer.

Geochemical Characteristics of the Jurassic Chunyang Granites in Northeastern Part of the Yeongnam Massif (영남육괴에 분포하는 쥐라기 춘양화강암의 지화학적 특성)

  • Kang, Minyoung;Kim, Yunji;Wee, Soomeen
    • Journal of the Korean earth science society
    • /
    • v.38 no.1
    • /
    • pp.49-63
    • /
    • 2017
  • The geochemical results of the Chunyang granites located in the northeastern part of the Yeongnam Massif, indicate that these rocks have characteristics of calc-alkaline series in the sub-alkaline field, I-type and peraluminous. Most of the geochemical features in major and trace elements show systematic trends, which are similar to differentiation trends of the general Jurassic granitoids in South Korea. The Chunyang granite is largely enriched in mobile LILE (Sr, K, Rb and Ba) relatively immobile HFSE. They show LREE enriched patterns [$(La/Lu)_{CN}=41.8-73.2$] with a slightly negative Eu anomaly [$(Eu/Eu^*)_{CN}=0.89-1.10$]. There are no meaningful correlations in major and trace elements between the Chunyang granites and the Buseok plutonic rock which is the main unit of the Yeongju batholith. This result may suggest that these two plutonic rocks be not derived from the same parent magma. Tectonic discrimination diagrams indicate that the Chunyang granite was formed in volcanic arc environments. These geochemical characteristics results suggest that the Chunyang granite must have been generated at the active continental margin during the subduction of the Jurassic proto-Pacific plate.